RSS

2021, May

0 Why is the Air Compressor Motor Easy to Burn Out?

During the operation of the air compressor, if the motor is always easy to be burned, and after the winding is burned, some phenomena or direct causes that caused the burn are covered, making post-mortem analysis and cause investigation more difficult, often making users confused and anxious.
ATO found a reasonable breakthrough after analysis: The operation of the electric air compressor motor is inseparable from the normal power input, reasonable motor load, good heat dissipation and the protection of the winding enameled wire insulation. Starting from these aspects, it is not difficult to find the reason for the burning of the electric air compressor motor.

0 PLC Selection Guide

Programmable Logic Controller referred to as PC or PLC is an electronic system operated by digital operations, specially designed for application in an industrial environment. It uses a memory that can be programmed to execute instructions for storing logical operations and sequence control, timing, counting and arithmetic operations, and through digital or analog input (I) and output (O) interfaces, controls various Type of mechanical equipment or production process. PLC is developed on the basis of electrical control technology and computer technology, and gradually developed into a new type of industrial control device with microprocessor as the core and integrating automation technology, computer technology and communication technology. PLC has been widely used in the automatic control of various production machinery and production processes.

0 Vacuum Circuit Breaker Troubleshooting

The advantages of indoor high voltage vacuum circuit breaker are not only oil-free equipment, but also long electrical life. It has mechanical life, large breaking insulation capacity, strong continuous breaking capacity, small volume, light weight, frequent operation, fire free, less operation and maintenance, etc. And they are quickly recognized by the operation, maintenance and technical personnel of the power department. The quality of some high voltage vacuum circuit breakers is not stable enough, the current carrying voltage is on the high side during operation and some vacuum interrupters still have air leakage. With the wide application of vacuum circuit breaker, faults also occur from time to time. The author analyzes the common faults of vacuum circuit breaker and gives treatment methods.

0 Select the Right Hydraulic Motor for Your Applications

What factors should be taken into consideration when selecting a hydraulic motor? The first thing that should be focused on is the operating conditions of the hydraulic system, following which we should decide on the output torque, speed and power as needed so as to pick a right product model and specification.

Blog archive