RSS

2026, July

0 How to Fix Step Loss in a Stepper Motor?

Stepper motor step loss is a common problem in motion control systems, especially in CNC machines, robotics, and automation equipment. Lost steps can cause positioning errors, vibration, reduced accuracy, and unexpected production failures.  To solve stepper motor losing steps, it is necessary to optimize the entire drive system. This article explains the most effective methods to reduce or eliminate step loss and improve stepper motor reliability.

0 How to Keep S-ON Always ON in PLC Servo Control Systems?

In PLC servo control systems, the Servo ON signal (S-ON) determines whether the servo drive is enabled and ready for motion control. Traditional systems usually turn S-ON on and off through external commands, but some applications require the servo drive to remain enabled continuously. This article explains how to configure a PLC servo position control system with the S-ON signal always ON.

0 Inductive Proximity Sensors vs. Capacitive Proximity Sensors

Inductive and capacitive proximity sensors are two widely used non-contact detection devices in industrial automation systems. Although they look similar, they work based on completely different sensing principles and are designed for different detection requirements. Understanding the differences between these two proximity sensors helps you select the right sensor for specific industrial applications. If you’ve ever found yourself wondering which one to choose for your application, this article will clear up the confusion.

0 How to Add Dual Emergency Stop in PLC Servo Control Systems?

Dual emergency stop is one of the important safety functions of servo motion control systems. It provides an extra protection layer for PLC-based servo motion systems, enabling emergency shutdown from two independent positions. Integrating hardware and PLC software emergency stop circuits to build two independent cut-off paths is a reliable solution. This article explains the full implementation workflow to improve machine safety and minimize equipment downtime.

0 10 Industrial Communication Protocols

Industrial communication protocols are the foundation of every modern automation system. PLCs rarely operate alone—they continuously communicate with HMIs, sensors, servo drives, robots, industrial PCs, and other field devices. Communication protocols define how these devices exchange data accurately, efficiently, and reliably.

0 How to Add Overtravel Protection & Reset Alarms in PLC Servo Position Control?

In a servo positioning system, reliable motion control requires more than simply driving a motor. The system must also be able to detect over-travel conditions, stop motion before mechanical damage occurs, and provide a safe method for clearing alarms after faults are resolved.

This guide demonstrates how to upgrade a PLC pulse-controlled servo system by adding overtravel protection and alarm reset functionality using three interposing relays. The result is a safer and more robust servo position control system suitable for industrial applications.

0 How to Wire an Gas Detector Controller?

If you're installing an gas detector controller, this guide explains how to complete both the 3-wire 4-20mA analog output wiring and the 4-wire RS485 communication wiring. Whether you're connecting a single gas detector or integrating multiple detectors into a monitoring system, following the correct wiring procedure is essential for reliable operation and accurate gas monitoring.

0 How to Set Up a Gas Detector Controller?

A gas detector controller serves as the central management unit of a fixed gas detection system, allowing users to configure connected gas detectors, manage alarms, record historical data, and monitor gas concentrations in real time. This guide introduces the basic operation of the ATO gas detector controller, including menu navigation, 4-20mA output configuration, and historical data export. By following these procedures, users can quickly configure the controller, ensure reliable gas monitoring, and simplify routine maintenance.

0 4-in-1 Multi-Gas Detector Setup Guide

Reliable gas detection is essential when working in environments where hazardous gases may be present. The ATO 4-in-1 multi-gas detector is designed to simultaneously monitor carbon monoxide (CO), oxygen (O₂), hydrogen sulfide (H₂S), and combustible gases (%LEL), helping users quickly identify dangerous atmospheric conditions and improve workplace safety.

This guide explains how to operate the gas detector, including powering on, accessing the menu, performing calibration, configuring alarm settings, managing data logging, exporting recorded data, switching measurement units, restoring factory settings, and viewing system information.

Blog archive