RSS

2026, October

0 Low-Pressure Switch vs. Electric-Contact Pressure Gauge in Fire Protection

Pressure monitoring and control are essential to the reliable operation of firefighting water systems. Two components used for this purpose are the low-pressure switch and the electric-contact pressure gauge. Both respond to changes in system pressure and can be used to trigger control actions at preset pressure thresholds. In some applications, they may serve similar functions, but they differ in how they detect pressure changes, indicate pressure readings, and interact with control circuits.

0 How to Control a Three-Phase Motor Using a VFD Panel

A variable frequency drive (VFD) can control a three-phase induction motor through its built-in control panel. In this mode, the operator can start and stop the motor using the panel keys and adjust the frequency reference with the drive's adjustment knob. This guide uses the ATO GK3000-CT VFD as an example to demonstrate how to configure panel control for a three-phase induction motor, covering basic wiring, parameter programming, and an operating test.

0 How to Tune Acceleration and Deceleration in PLC Servo Position Control?

Acceleration and deceleration tuning helps make motor startup and stopping smoother in PLC servo position control systems. Adjusting the servo drive's smoothing parameter can reduce sudden mechanical shock and vibration. This guide explains the wiring, servo drive parameter settings, and motion tests before and after smoothing.

Stepper Motor Drive Troubleshooting

A stepper motor drive controls the movement of a stepper motor and plays an important role in CNC machines, 3D printers, and automated equipment. When a drive fails, the motor may stop responding, lose position, vibrate excessively, or stall under load. Most stepper motor drive problems can be traced to power supply issues, incorrect wiring, control signal errors, unsuitable parameter settings, or drive protection. This article covers common faults, practical troubleshooting steps to help identify the cause and restore normal operation.

2 How to Configure a PLC Servo Control System to Keep S-ON OFF?

In a PLC-based servo position control system, the servo-on (S-ON) signal enables the servo drive for operation. How can the S-ON signal be kept OFF even when the physical enable button is pressed? This article explains the wiring, servo drive parameter settings, and PLC ladder logic used to configure a system with S-ON permanently inactive, followed by an operation test.

0 How to Wire a Timed Alternating Motor Control Circuit?

A timed control circuit enables two three-phase induction motors to run alternately according to preset time intervals. This arrangement helps balance operating hours and reduce continuous-duty stress on individual motors. Common applications include dual-pump systems, conveyor lines, and other industrial automation equipment.

Blog archive