Force gauges are universal measuring instruments used in almost all industries. As the name suggests, force gauges are used to measure force in push or pull tests. Force gauges have applications in research and development, production and quality laboratory environments. There are generally two main types of force gauges: mechanical force gauge and digital force gauge. Now, ATO automation will introduce you to the detailed use of a force gauge.
2024, June
Density meters are used to measure the density of different liquids. They have a built-in digital temperature sensor. The medium temperature should be between 0 and 100°C or 0 and 150°C. They can measure different liquid contact materials.
A plug valve is a right-angle rotary motion manual valve. It uses a cylindrical or conical plug (plug disc) to allow or prevent straight-through flow through the body. Plug valves provide a straight-through passage through a port so that fluid can flow through the open plug with minimal turbulence. Flow can be fully open or fully closed in either direction.
Plug valves have been used in many different fluid services. They perform well in slurry applications. They are used as on/off shutoff valves in airtight service. They are used in air, gas and steam service, natural gas and oil piping systems, food processing, non-abrasive slurries, vacuum, pharmaceutical service, and vacuum to high pressure applications. They are suitable for on-off valves, diverter service and moderate throttling. Originally, plug valves were intended to replace gate valves because, compared to gate valves, plug valves have a quarter-turn action and can be easily opened and closed against the flow.
The pinch valve can squeeze the sleeve by pneumatic, electric, manual or hydraulic driving methods to achieve the function of switching/ regulating. Pulse valve refers to a diaphragm valve controlled by a pilot valve such as solenoid or pneumatic, which can instantly open and close a high-pressure air source to generate pulses. The pulse valve is the main component of the bag dust collector and can be sprayed more than 1 million times. Pulse valve is a type of valve that relies on the delay effect of air flow through air resistance and air volume to turn the input long signal into a pulse signal. ATO Automation will introduce the different working principle and precautions of manual pinch valve and pulse solenoid valve.
Pinch valve is squeezed by pneumatic, electric, manual or hydraulic driving methods to achieve the role of switching/adjusting. A pinch valve is a valve that uses flexible tubing that can be pinched or compressed to shut off the flow of fluid or gas through the valve. When the sleeve is not clamped, the valve opens and fluid or gas can flow through it.
Different types and uses of hipot testers may be different, but generally, the following maintenance tips can be used for safe pressure measurement. Through regular maintenance and care, the performance of the hipot tester can be ensured to be stable and its service life can be extended. It also helps to reduce downtime caused by equipment failure and improve work efficiency.
A hand valve is a type of valve that is manually operated, typically by turning a handwheel or lever. It's used to control the flow of fluids (liquids or gases) in a piping system. Hand valves are commonly found in various industries, including oil and gas, chemical processing, water treatment, and HVAC (heating, ventilation, and air conditioning) systems.
SCARA robot is a robot arm specially used for assembly operations. It has three rotating joints whose axes are parallel to each other and can be positioned and oriented in a plane. In addition, there is a mobile joint to complete the movement of the end piece perpendicular to the plane. This type of robot is usually equipped with a visual recognition system, which can be programmed to identify and grasp various parts to meet different operating requirements. It has a compact structure, agile movements, and strong adaptability to the working environment. Therefore, the SCARA is particularly suitable for those occasions that require fast and precise operations, such as electronic assembly, pharmaceutical packaging, and other industrial fields.
Autotransformer refers to a transformer whose windings are primary and secondary on the same winding, with the primary and secondary windings directly connected in series and self-coupled. According to the structure, it can be further divided into adjustable pressure type and fixed type. A regular transformer transfers energy through electromagnetic coupling between the primary and secondary coils. There is no direct electrical connection between the primary and secondary coils, while an autotransformer has a direct electrical connection between the primary and secondary coils. Its low-voltage coil is a part of the high-voltage coil. ATO online store will explain how autotransformers work and their advantages in power systems and electronic devices.
A magnetic starter is a device that uses magnetic field force to start an engine. Its operation principle is based on electromagnetic induction and magnetic interaction. It typically consists of two main parts: an electromagnetic coil and a permanent magnet.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012