Linear scale is a measuring and feedback device that works on the optical principle of grating. Linear scale is often used in the closed-loop servo system of CNC machine tools and can be used for Linear or angular displacement detection. The measured signal is digital pulse, which has the characteristics of wide detection range, high detection accuracy and fast response. For example, in CNC machine tools are often used to detect the tool and workpiece coordinates, to observe and track the feed error, in order to play a role in compensating the motion error of the tool. Linear scale is composed of a scale grating and a grating reading head. The scale grating is generally fixed on the fixed parts of the machine tool, the reading head of the grating is installed on the moving parts of the machine tool, and the indicating grating is installed in the reading head of the grating.
2019, May
With the general use of machine tools in the field of processing, the accuracy of products processed by machine tools has been continuously improved, the assistant of machine tools in the processing of the knife route precision products are also used in machine tools, the linear encoder is a kind of product which assists the precision of the cutter of machine tool. The linear scale, often used in CNC machine tool closed-loop servo system, can be used as linear displacement or angular displacement detection. In machine tools, it is often used to detect the coordinates of tools and work pieces to observe and track the error of the cutter, such as play a role in compensating the motion error of the cutter. CNC machine tool installed linear encoder, which can ensure the precision of machine tool and has a good auxiliary effect for CNC machine tool processing accuracy. Linear scale is often used with digital scale for milling machine, lathes, surface grinders, grizzly planer ang optical comparator.
The relay contacts’ jumping or switching on/off will cause the change of inductive load and further gas discharge. The current of relay contact on-off is small, there will be no electrical arc between contacts, but there will be a spark at the relay contacts. Due to the existence of inductance in the contact circuit, there will be overvoltage on the inductance when disconnecting the contact circuit. Together with the voltage supply in the contact gap, the contact gap that just separates a little will be broken down and discharged. Limited to energy, there will only be spark discharge. The conversion of capacitance between contacts and energy in inductance makes spark discharge disappear and reappear, becoming a high frequency signal, which will be crosstalk to related circuits by means of high frequency radiation, wire transmission and distributed capacitance, forming interference signals. Furthermore, spark discharges can also damage relay contacts and shorten the service life of contacts, so that sparks may ablate contact surfaces and make the surface uneven, resulting in failure of relay poor contact.
A pneumatic cylinder is a cylindrical metal machine that guides a piston in a straight-line reciprocating movement in a cylinder. The air converts heat energy into mechanical energy through expansion the engine cylinder, and the gas receives piston compression in the compressor cylinder to increase the pressure.
A pneumatic cylinder is a cylindrical metal machine that guides a piston in a straight-line reciprocating movement in a cylinder. The air converts heat energy into mechanical energy through expansion in the engine cylinder, and the gas receives piston compression in the compressor cylinder to increase the pressure.
When using uninterruptible power supply (UPS) system, people tend to unilaterally believe that there is no need to maintain batteries. However, the data show that there is about one third UPS host failure or abnormal operation caused by battery failure. Therefore, it is more and more important to strengthen the proper use and maintenance of UPS battery for prolonging the service life of batteries and then reducing the failure rate of UPS system.
The impedance of N-wire is at the milliohm level, and its unbalanced voltage of load neutral point is the voltage drop of N-wire current on N-wire impedance with small value. Even if the three-phase load is seriously unbalanced, it is enough to clamp the neutral point potential of load on the neutral point potential of power supply. While the ground resistance is at the ohm level, which is several hundred times larger than the N-wire impedance, so it is impossible to clamp the neutral point potential of load on the neutral point potential of power supply.
Step up or step down transformer is an important part of power grid operation, it's of great significance to the stable operation of the power grid. It meets different power demands by adjusting current and voltage. Once a transformer fails, it will cause great losses to the whole power grid, and further affects the normal operation of industrial production. In order to ensure the efficient operation of transformers, it is necessary to carry out a comprehensive management of the whole process of installation and application, thus reducing potential safety hazards and improving operational efficiency.
Before purchasing a voltage stabilizer, you'd better determine the reverse range and frequency of household voltage. For instance, if your voltage is pulled to about 80V and the input range of your voltage stabilizer is between 140 V and 260V, it will not work as you wish. Therefore, voltage stabilizers should be selected according to the power supply range of the service environment. It is recommended to choose a broadband voltage stabilizer.
Nowadays, the magnetic flow meter (electromagnetic flow meter) has been widely applied to measuring of industrial sewage or wastewater. With a high precision and a long service life, the magnetic flow meter is the top choice for the environmental measuring industry. To choose the correct magnetic flow meter can five fuller play to the magnetic flow meter for specific purposes. Generally, the selection of the magnetic flow meter is based on the following factors including chemical attributes of the fluid medium, pipeline diameter, flow range, liner material, electrode material and output signal.
A magnetic flow meter, mag meter, or electromagnetic flow meter is a kind of instrument which measures the volume flow rate of the conductive fluid based on the principle of Faraday's Law of Electromagnetic Induction. With a large measurable flow range, the ratio of the maximum flow rate to the minimum flow rate maintains above 20:1. The mag flow meter is suitable for wide range of industrial pipe diameter, and the maximum can reach up to 3m. The output signal and the measured flow are linear, and the magnetic flow meter has high measurement precision. It can effectively measure the flow rate of fluids with a conductivity more than 5μs/cm, such as acid solution, alkaline solution, saline solution, water, sewage, corrosive liquid, mud, ore pulp, and paper pulp. Nevertheless, the electromagnetic flow meter cannot be used to measure the flow of gases, steam and purified water.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012