Automobile image sensing has a wide range of applications, the image sensor with excellent performance and advanced image processing capability can enhance driving safety and improve users’ riding experience, it has become a popular technology in the automotive field in recent years.
Main application fields of automobile image sensor
Automobile image sensors has extensive applications, including the visual application, such as the Rear View Camera, front/rear/ overlook/ panoramic parking image, mirror replacement, passenger monitoring, fatigue driving monitoring, dashboard control, DVR, gasbag; advanced driving auxiliary system (ADAS), such as forward collision warning, lane departure warning, automatic long light control, traffic signal recognition, pedestrian detection, adaptive cruise control, blind spot detection, night viewing.
2018, August
Electromagnetic clutch
Any clutch can complete the function of mechanical transmission, electromagnetic clutch controls the engagement and separation of the clutch through the power failure of the coil. For the common dry monolithic electromagnetic clutch, when the coil is powered on, magnetic force is generated to pull the “armature” piece, so that the clutch is engaged; When the coil is powered off, the magnetic force disappears and the “armature” returns back, the clutch is separated. This is a power failure working mode, beside this, the electromagnetic clutch can also work in power break combination, which will not be introduced here.
The vibration frequency of body is not in line with that of grading ring. Owing to the damping of transformer oil, grading ring has a low vibration frequency. And owing to single point welding and aluminum sheet welding, it has a poor mechanical strength. In the long-term operation, the vibration brought by the inconsistent vibration frequency of earth tag of line reactor (aluminum, welding) and grading ring causes metal fatigue and cracks. Solution: fix ascending flange base and body to reduce free-running vibration.
Displacement sensor, also called linear sensor, is a linear unit sensing metal. The function of sensor is to transform the tested physical quantity into electric quantity. The working principle of straight line displacement sensor is same as that of slide rheostat. It is used as voltage divider to present the actual position of tested position through relative output voltage. There are a few requirements for the work at the position:
Oil replacement and drying treatment of electric reactor: if the long idle time or operation time or other nature and human factors cause insulation deterioration of line reactor, water inflow or oil deterioration, oil replacement and drying treatment should be conducted to line reactor. Oil replacement of line reactor: lift the body of line reactor out, drain sump oil, wash oil tank, and wash the greasy dirt on the body of electric reactor if any. After drying, fill electric reactor with oil and replace all grease-proof rubber seals. Theline reactor can be operated only after passing the test.
Drying treatment of line reactor: its body has many drying methods. Users can adopt zero phase sequence drying method, eddy drying method, short circuit drying method and oven drying method when they dry line reactor by themselves.
The functions of input line reactor
It can restrain harmonic current, improve power coefficient, weaken surge voltage in input circuit, the impact of current on VFD, the influences of power voltage, limit current surge caused by grid voltage change and switching surge, spike pulse or voltage defects in phase change of rectifying circuit, effectively protect VFD and improve power coefficient. Input line reactor not only can stop the disturbance from power grid but reduce the pollution of power grid by harmonic current produced by rectifying unit.
The common line reactors in electrical power system include series reactors and paralleling reactors. Series reactors are mainly used to limit short-circuit current or ultraharmonics in filter by connecting with capacitor in series or in parallel. The line reactors in power grid of 220kV, 110kV, 35kV and 10kV are used to absorb the idle work of charging capacity of cable line. Operating voltage can be adjusted by adjusting the number of line reactors in parallel. Ultra-high voltage paralleling reactor can improve the operation conditions relating to reactive power of electrical power system including:
The calibration of load cell and digital display controller is mainly to confirm the weighing signal of zero point and full range of the load cell. That is to say, telling the digital display controller what are zero weight signal and full range weight signal received from the load cell. In this way, the digital display controller will display the value according to the detected weight, or export the matching weight signal to the PLC/DCS control system.
Contact system maintenance
- Check whether the position of the movable and static contact points is aligned, whether the three-phase is closed at the same time; Adjust the contact spring in case of any problem.
- Check the wear degree of contact points, the wearing depth shall not be more than 1mm. In case of contact burning or welding falling, please replace timely; Slight burning will not affect the application. The sand paper can not be used to clean the contact, a shaping file is suitable.
- The resistance shall not be less than 10MΩ when measuring the interphase insulation resistance;
- Check whether the auxiliary contact acts flexibly, the contact travel should comply with the specified value. Check whether the contact is loosening, maintain or replace timely in case of any problem.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012