Three-wire control is a common method of operating a motor through a variable frequency drive (VFD). It uses external push buttons connected to the drive's digital inputs to control motor operation without directly switching the motor's power supply. This article explains how to configure the VFD for 3-Wire Control Mode 1, using three push buttons to control forward and reverse rotation and the enable function for local machine operation.
2026, November
Pressure gauges do more than display pipeline pressure in an industrial system. Depending on their output signals, they can also support continuous pressure regulation or trigger equipment to start and stop at preset pressure limits. Remote transmission pressure gauges and electric-contact pressure gauges serve these two different purposes, although their similar appearance can make them easy to confuse.
The key to choosing between them lies in how they transmit pressure information and interact with control equipment. This article compares their structures, working principles, wiring, and control applications to help identify the right type for different pressure-control requirements.
An incorrect electronic gear ratio can cause unexpected servo motor movement in a PLC-based positioning system. The electronic gear ratio determines the relationship between incoming command pulses and the commanded motor movement. If the ratio is configured incorrectly, the motor may travel much farther than expected or exhibit abnormal motion. This guide explains how to configure the electronic gear ratio, wire the control system, program the PLC, and test the servo motor response under different parameter settings.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012