Industrial water chiller is a kind of water cooling equipment that can provide constant temperature, constant current and constant pressure. The principle of the chiller is to inject a certain amount of water into the internal water tank of the machine, and the water is cooled by the refrigeration system. Afterwards, the water pump inside the chiller injects cryogenically frozen water into the equipment that needs to be cooled. The chilled water takes away the heat inside the machine and returns the high-temperature hot water to the water tank for cooling. In this way, the circulation exchange cooling can achieve the function of cooling the equipment.
2021, January
When the same stepper motor works with different drive schemes, the torque-frequency characteristics are also very different.
When the stepper motor is working, the pulse signal will be added to each phase winding in turn in a certain order (the ring distributor in the stepper motor driver controls the way the winding is energized and de-energized).
Unlike other motors, the nominal rated voltage and rated current of a stepper motor are only reference values. Because the stepper motor is powered by pulse, the power supply voltage is its highest voltage, not the average voltage. Therefore, the stepper motor can work beyond its rated value range. However, when choosing, it should not deviate too far from the rated value.
The stepper motor does not accumulate errors: The accuracy of the general stepper motor is 3%-5% of the actual step angle, and it cannot be accumulated.
The brushless DC motor is a device that converts electrical energy into mechanical energy. By consuming electrical energy, mechanical energy can be obtained to achieve certain needs. What are the applications of BLDC motors? Brushless DC motors can be used in the small home appliance industry. The most common electric fan is to use brushless DC motors to convert electrical energy into mechanical energy to turn the electric fan, bringing us coolness. In addition, lawn mowers in the garden industry and electric drills in the power tool industry all work with brushless motors.
Brushless dc motor
The brushless DC motor is composed of a motor body and a brushless motor driver. It is a typical mechatronics product. Because the brushless DC motor runs in a self-control mode, it will not add a start winding to the rotor like a synchronous motor started under heavy load under variable frequency speed regulation, nor will it cause oscillation and loss of step when the load changes suddenly. The permanent magnets of small and medium-capacity brushless DC motors now mostly use high magnetic energy level rare earth neodymium iron boron (Nd-Fe-B) materials.
Stepper motor
A stepper motor is a motor that converts electrical pulse signals into corresponding angular or linear displacements. Every time a pulse signal is input, the rotor rotates an angle or moves forward. The output angular displacement or linear displacement is proportional to the number of input pulses, and the speed is proportional to the pulse frequency. Therefore, the stepper motor can be called the pulse motor.
LCR meter is a special measuring instrument used to measure the characteristic parameters of electrical components. L is inductance, C is capacitance, and R is resistance. The LCR meter is a dedicated meter with high measurement accuracy. As a precision instrument, if the operation is not standardized, it is easy to damage the instrument and affect the accuracy of the measurement result. This article will summarize the common failures and precautions in the use of LCR meters to avoid failures, helping users to use the LCR meter correctly.
Working Principle of BLDC Motor
The BLDC motor is mainly composed of the motor body, position sensor, electronic commutation circuit and driver. The motor body is similar in structure to a permanent magnet synchronous motor, but it has neither cage windings nor other starting devices. The stator windings are generally made into multiple phases (three-phase, four-phase, five-phase and so on). The rotor is composed of permanent magnet steel according to a certain number of pole pairs (2p=2, 4...). In a brushless DC motor, the armature winding is arranged on the stator, and the permanent magnet poles are arranged on the rotor. The position of the armature winding of each phase of the stator relative to the magnetic field of the permanent magnet of the rotor is sensed by the rotor position sensor electronically or electromagnetically. Moreover, it uses its output signal to drive the corresponding power switch transistor connected with the armature winding through an electronic conversion circuit according to a certain logic program, and commutate the current switch to the corresponding armature winding. With the rotation of the rotor, the rotor position sensor continuously sends out signals, causing the armature winding to be continuously energized in sequence, and the energization state is constantly changed. As a result, the direction of the current flowing in the coil conductor under a certain magnetic pole is always the same, and the rotor keeps running.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012