The wind turbine, borrowed from jet engine technology, overcomes a fundamental drawback of conventional wind turbines. A wind turbine's blades are surrounded by a shield that directs air through them and speeds them up, increasing the amount of electricity produced. A wind turbine is a turbine powered by wind energy. To make a wind turbine last, we need to learn how to maintain it. In this article, we describe the maintenance of wind turbines in chronological order.
Blog
A magnetic stirrer is a device that forces liquid and gas media to convect and mix uniformly. The type, size, speed, power and other parameters of the agitator have an important impact on the effect of media stirring and mixing. Different stirring processes need to be realized by the operation of different stirring devices. When selecting the type, first of all, the purpose and requirements of the stirring operation should be based on the process. The following is an introduction that how to troubleshoot magnetic stirrers.
Magnetic stirrers have become a wide variety of low-cost laboratory routine equipment, which enables us to have the ability to choose the magnetic stirrer that we need. Faced with many types of magnetic stirrers with different prices on the market, how should we choose? For applications that only require stirring at room temperature, choose a simple magnetic stirrer with only stirring function. For applications that require stirring and heating at the same time, and the temperature requirements are not very strict, a standard heating magnetic stirrer should be selected.
The magnetic float level sensor is suitable for liquid level or interface measurement in open or closed pressure vessels. It is a float switch that uses a magnetic float as a sensing element, and reflects the measured liquid level or interface through the coupling between the magnetic float and the magnetic body in the display color bar. However, how to maintain a magnetic float level switch in winter?
Every time we use the gloss meter, we must first calibrate the gloss meter. The purpose of calibration is to eliminate the influence of changes in the intensity of the light source and environmental changes each time the machine is turned on. This step of calibration is very important. If the calibration is not done well, the measurement will be greatly affected. Therefore, during the calibration process, it is necessary to ensure that the bottom surface of the gloss meter and the calibration plate are in very close contact. So how to calibrate gloss meter?
Gloss meter, as known as gloss tester, is used in gloss measurement for paint, marble, ceramic, plastic, metal, etc. Gloss meter is widely used in chemical raw materials, paint manufacturing, aerospace industry, automobile industry, car maintenance, floor polishing, electronics, electrical appliances, IT communications and other industries. But how to choose a gloss meter?
Lime glaze is a commonly used glaze in the production process of traditional lime glaze ceramic. Due to the difference in raw materials and calcination process, the appearance and color of lime glaze will be different. In order to verify the surface gloss of lime glaze, a gloss meter can be used to measure. The lime glaze uses calcium oxide as the flux, and the glaze whose molecular number of calcium oxide should account for more than half is the lime glaze.
Linear guide rail, also known as line rail, slide rail, linear guide rail, linear slide rail, used for linear reciprocating movement, and can bear a certain torque, can achieve high precision linear motion under high load. We not only need to understand what linear guide is, but also know how to clean it, so that we can use it for a longer time. In this article, we will introduce how to clean linear rail.
The thickness of the coating has an important influence on the quality of the color-coated board. In order to ensure the consistency of coating quality, coating thickness gauge must be used for thickness detection. ATO coating thickness gauge can quickly and accurately test a variety of coating thickness, with minor measurement errors and high reliability. How to measure the thickness of a color-coated board with a coating thickness gauge?
Magnetic stirrer is a very common instrument in experimental equipment. No matter what kind of instrument is used, there will be many different problems. So how to effectively avoid the problems in the use of magnetic stirrer? The magnetic stirrer is suitable for stirring or heating and stirring at the same time. It is suitable for liquid or solid-liquid mixture with low viscosity.
Water chiller is a kind of water cooling equipment, is able to provide constant temperature, constant current, constant pressure cooling equipment. In addition to knowing what a chiller is and how to use it, we also need to know how to maintain a chiller. As long as the equipment is maintained regularly according to the instructions, the normal operation of the equipment can be ensured. In this article, we will introduce water chiller maintenance in detail.
An oscilloscope, a benchtop instrument, graphically displays electrical signals and shows how those signals change over time. They are used by engineers to troubleshoot circuits and check signal quality. Most engineers use digital oscilloscopes. Digital oscilloscopes are used to acquire and store waveforms, display the voltage, frequency, noise portion of the signal, detect whether the signal is distorted, the time interval between signals, etc. But when it comes to choosing an oscilloscope, how do you know which oscilloscope is right for you? The following 7 factors need attention.
While dehumidifiers are busy sucking moisture out of the air, they are also collecting all kinds of nasty things like mold and bacteria. Regular cleaning is an important part of its maintenance, especially during periods of heavy use. Follow these steps to make sure your dehumidifier is clean, which will help it run optimally and keep the air you breathe as healthy as possible. This article will introduce the cleaning steps of the dehumidifier in detail.
As the saying goes, not because of heat, but because of humidity. Indoors, humidity is a big problem, especially in basements and bathrooms. Signs that the air is too humid include musty smells, damp conditions, condensation on windows, and damp spots on walls. Moisture can cause mold to grow and spread, creating unhealthy living conditions in your home. A dehumidifier is a good line of defense. It absorbs moisture from the air and collects it in a removable container. In this article, we will introduce how to get the most from your dehumidifier.
ATO digital torque sensor feature a wide capacity range from 0.1/5/300/1000 Nm to 10000 Nm, with optional RS485 as well as other type’s output signals. Equipped with a 7 pin waterproof circular locking connector and 3m cable, the torque sensor can measure both forward and reverse torque. Now, we’re gonna talk about a digital rotary torque sensor from ATO, Model TQS-DYN-200.
Submersible sewage pump is a kind of environmental protection industry used to transport solid particles, fiber and other solid-liquid mixed liquid, such as domestic sewage, industrial waste water, mud and other pump products. Sewage pump and motor coaxial rotation, and at the same time submersible work under the liquid. Its installation mode is divided into automatic coupling installation and mobile installation. In this article we will cover both installation methods in detail.
Selecting the correct solenoid valve is the backbone of a stable automated fluid control system. A single mismatched parameter can lead to coil burnout, leakage, or system failure. Based on ATO industrial experience, this guide outlines the core criteria for professional selection.
Compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint. Small sewage pumps can be installed freely, large sewage pumps are generally equipped with automatic coupling devices can be installed automatically, installation and maintenance is quite convenient. Submersible sewage pump because of the pump and motor coaxial, shaft short, rotating parts light weight, so bearing load is relatively small, life is much longer than the general pump. There is no cavitation damage and irrigation water and other problems. In this article, we introduce the maintenance of sewage pump.
Pneumatic actuated ball valve is an opening and closing control device that operates the valve through compressed air. It not only has fast switching speed, but also only needs one air source, which not only saves a lot of human resources and time, but also does not require on-site operation or high-altitude and dangerous introduction of manual operation. Remote centralized control greatly improves and ensures the safety of use. Therefore, the more widely used in the industrial field, the larger the amount of use and the faster the consumption. In order to enhance the service life of the pneumatic ball valve, daily maintenance is essential.
The physical nature of infrared radiation is thermal radiation. The higher the temperature of the object, the more infrared radiation it emits, and the stronger the energy of the infrared radiation. The study found that the various thermal effects of the solar spectrum gradually increase from violet light to red light, and the largest thermal effect occurs within the frequency range of infrared radiation, so people turn infrared radiation into thermal radiation or heat. The infrared temperature sensor uses the radiant heat effect to cause the detection device to receive radiant energy and cause the temperature to rise, thereby changing the performance of a column in the sensor and the temperature.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012