Electric ball valves are a common type of industrial valve, widely used in various fluid control systems. However, there are many factors to consider when selecting the right electric ball valve. In this article, ATO Store will discuss the selection process of electric ball valves in detail, including information on the working environment, valve material, caliber specification, control mode, actuator parameters and brand selection.
2023, September
A inclinometer sensor is a device used to measure the tilt angle of an object. The principle is based on the effects of changes in resistance, capacitance, and magnetic induction in physics. Inclinometer sensors are often used for precise measurement of changes in the horizontal angle of objects. They can be used to measure the inclination of the measured plane relative to the horizontal position, as well as the parallelism and perpendicularity of the two components; It has become an indispensable and important measuring instrument in fields such as bridge erection, railway laying, civil engineering, oil drilling, aviation and navigation, industrial automation, intelligent platforms, and mechanical processing.
The electric ball valve is composed of an electric actuator and a ball valve. It is a pipeline pressure component used for industrial automation process control, usually used for remote opening and closing (connecting, cutting off) control of pipeline media. In this page, ATO industrial will list some prices of electric ball valve. For more infomation, please go to the industrial ball valve products page.
Check valve refers to the opening and closing parts for the round valve and rely on their own weight and media pressure to produce action to block the medium backflow of a valve. Belong to the automatic valve category, also known as check valve, check valve, backflow valve or isolation valve. Flap movement is divided into lift and rotary type. Lift check valve and globe valve structure is similar, only the lack of valve stem to drive the valve flap. The medium from the inlet side (lower side) inflow, from the outlet side (upper side) outflow. When the inlet pressure is greater than the weight of the valve and its flow resistance and when the valve is open. Conversely, the medium backflow valve is closed.
A rigid coupling is a mechanical device used to connect two shafts in order to transmit rotary motion and torque while keeping the relative positions and angles between the shafts unchanged. Its main purpose is to ensure that the connected shafts can rotate synchronously without relative shaft displacement or deformation, thus realizing high-precision rotary transmission.In this article, ATO Shop will price rigid couplings according to their size.
A CNC router machine is a processing machine tool that is widely used in machine tool equipment. It can perform plane milling, plane cavity milling, outline milling, three-dimensional and more complex surface milling, and can also perform drilling, boring, thread cutting, and other holes. The powerful functions of the CNC router machine enable it to be widely used in the industrial field. Next, let us bring you the functions and features of using a CNC router machine to learn more about why people use a CNC router machine.
The chamfering machine is an indispensable equipment in modern industrial production, and it plays an important role in the field of chamfering processing. So do you know what advantages the chamfering machine has? Next, ATO will introduce the advantages of the chamfering machine to you, hoping to help those who need it.
Rigid couplings are torsionally rigid couplings that do not have any rotary clearance even when subjected to loads, and even when there is a deviation that generates a load, the rigid coupling still transmits the torque rigidly.
Any deviation in the system can lead to premature damage to the shaft, bearings or coupling, which means that it cannot be used at high speeds because it cannot compensate for the relative displacement between the shafts due to the high temperatures generated by the high speed operation. Of course, if the relative displacement can be successfully controlled, rigid couplings can also perform very well in servo applications.
Rigid couplings are an essential component in mechanical engineering, connecting two shafts to transmit power and torque while maintaining precise alignment. These couplings are designed to eliminate relative motion between shafts, ensuring efficient power transmission and reducing wear and tear on machinery. They have many advantages, including simple structure, easy assembly, convenient maintenance, low cost, high torque capacity, torsional stiffness, and zero backlashes. These couplings do not have the ability to cushion and compensate for the relative displacement of the two axes, requiring the two axes to be installed in strict alignment. But the structure is simple, low manufacturing cost, easy to install, dismantle, maintenance, can ensure that the two axes have a high degree of centering, transfer torque is larger, so widely used.
There are several types of rigid couplings available, each with its own unique design and applications. In this article, we will explore some of the most common types of rigid couplings used in various industrial settings.
A stepper motor driver is an electronic device used to control the movement of a stepper motor. A stepper motor is a device that converts electrical impulses into mechanical rotation and is characterized by precise position control and a relatively simple drive method. Stepper motor drivers play a key role in many applications, from industrial automation to consumer electronics. ATO store will detail why stepper motor drivers are needed and how they are used in various fields.
As the core component for controlling stepper motors, stepper motor drivers play an important role in the field of automation. Their precise position control capability and relative simplicity of control make them the preferred choice in many applications, driving innovation and development in a wide range of industries.
A stepper motor driver is a key electronic device used to control the motion of a stepper motor. It achieves precise positional and angular control by precisely delivering current to the individual windings of the stepper motor, causing it to rotate in predetermined steps. Stepper motor drivers typically use advanced Pulse Width Modulation (PWM) technology to convert digital signals into current pulses suitable for motor operation, resulting in highly controllable motion.
The Stepper motor driver is an important part of controlling the rotation of the stepper motor, which converts the control signal into a current signal to drive the stepper motor to rotate according to the precise angle. Stepper motors are widely used in many fields, such as printers, CNC machine tools, robots, etc. ATO.com will introduce the working principle of stepper motor driver in detail.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012