The application of brazed plate heat exchangers in the refrigeration industry is very common. The brazed plate heat exchanger is an efficient and compact heat exchange equipment. In the 1880s, it was successfully developed as a continuous low-temperature sterilizer, and it began to be used in the food industry in the 1920s. Due to the uniqueness of the brazed plate heat exchanger in manufacturing and use, it is widely used in petroleum, chemical, light industry, electric power, metallurgy, machinery, energy and other industrial fields, thus becoming a very competitive variety in the heat exchanger family. In addition, brazed plate heat exchangers are also used in the refrigeration field. Let’s talk about its application and development below.
2021, February
Servo motor is also called execution motor. Its working principle is similar to that of a two-phase asynchronous motor. However, because it is used as an actuator in a CNC machine tool to convert an AC signal into an angular displacement or angular velocity on the shaft, the speed of the rotor speed is required to reflect the phase of the control signal. It does not rotate when there is no control signal.
Since the two windings on the stator are spaced apart by an electrical angle of 90°, if a symmetrical voltage with the same amplitude and a phase difference of 90° electrical angle is applied to the two-phase windings, a circular shape will be generated in the air gap of the motor. Rotating magnetic field. If the amplitude of the two voltages is not equal or the phase is not 90° electrical angle, the generated magnetic field will be an elliptical rotating magnetic field. If the signal applied to the control winding is different, the ellipticity of the generated magnetic field is also different.
Hipot tester, also called dielectric strength tester, is used to carry out the test of applying a specified AC or DC high voltage between the live part and the non-live part of the electric appliance to check the hipot of the insulating material of the electric appliance. In long-term work, electrical appliances must not only bear the effect of rated working voltage, but also bear the effect of overvoltage that is higher than the rated working voltage for a short time during operation(The overvoltage value may be several times higher than the rated working voltage value). Under the action of these voltages, the internal structure of electrical insulating materials will change. When the overvoltage intensity reaches a certain value, it will cause the insulation breakdown of the material. The electrical appliances will not operate normally, and the operator may get an electric shock, endangering personal safety. The main electrical safety test indicators include AC/DC hipot, insulation resistance, leakage current, ground resistance, etc. AC/DC hipot tester is used to test the electrical safety performance of the product under actual working conditions, so it is one of the important instruments for testing the electrical safety performance of the equipment.
The digital clamp meter is a meter used to measure the current of the running electrical circuit. With this instrument, the current can be measured under uninterrupted power conditions. It can be used to measure AC and DC voltage, AC current, resistance, capacitance, diode forward voltage drop, circuit continuity, frequency and duty cycle. The greatest convenience of measuring AC current is that only one wire to be measured is placed in the intersection. Moreover, the measured AC current frequency range can be as wide as 1 kHz. The display of ATO clamp meter is equipped with background light, which is convenient for working under the condition of low light.
After buying an ultrasonic cleaner, you should first read the instructions of the ultrasonic cleaner carefully. The instruction for use is included in the packaging box of ATO ultrasonic cleaner. Please keep the manual properly in case you need it in the future. The following will tell you about how to use the ultrasonic cleaner for your reference.
The industrial endoscope is a new high-tech product designed and produced according to the inspection requirements of the inner surface of the pipeline in the petrochemical industry, industrial machinery, electronic and electrical industry, aerospace, etc. It integrates optical, mechanical, electrical, and image processing software. The industrial endoscope is equipped with a high-resolution color monitor or USB port. It is more convenient to carry, and the observation image is clearer. The operator can use the high-resolution color CCD to freeze, enlarge, analyze, measure and print the report of the observed suspects and flaw detection parts with the help of a unique professional software processing system, thereby greatly improving the accuracy of judging the flaw detection parts on the inner wall of the pipeline.
Simply put, LCR meter measures the characteristic parameters of separate components, such as resistance value, capacitance value, etc. It generally needs to be tested independently after power failure. Multimeter is a multifunctional measuring instrument. It can test separate components, electrical signal characteristics, and has some other measurement functions.
LCR meter is a special measuring tool used to measure the characteristic parameters of electrical components. L refers to inductance, C refers to capacitance, and R refers to resistance. In addition, the LCR meter cannot be used to measure other parameters. Moreover, the inductance, resistance or capacitance must be measured when the circuit is powered off. Because it is a dedicated instrument, the measurement accuracy is high.
- 2026
- 2025
- 2024
- 2023
- 2022
- 2021
- 2020
- 2019
- 2018
- 2017
- 2016
- 2015
- 2014
- 2013
- 2012