Inductive Proximity Sensor


An inductive proximity sensor, also known as a proximity switch, is a noncontact device that employs a high-frequency oscillator to generate an alternating field. When a metal target nears, induced eddy currents attenuate the oscillation; this change is demodulated into discrete or analog outputs in PNP, NPN, or multiple wiring formats. Detection distance is governed by target conductivity and permeability, while shielded, unshielded, and varied housing styles enable adaptable industrial mounting.

How Inductive Proximity Sensors Work

Inductive proximity sensors operate based on Faraday’s Law of Electromagnetic Induction. The internal structure consists of an oscillator, a coil, a detection circuit, and an output stage.

  • High-frequency field generation:  The oscillator drives the coil to produce a high-frequency alternating electromagnetic field from the sensing face.
  • Eddy current effect:  When a metallic object enters this field, eddy currents are induced within the metal surface.
  • Oscillation attenuation:  The eddy currents consume energy from the oscillator, causing the oscillation amplitude to decrease or stop.
  • Signal output:  The detection circuit converts this change in oscillation state into a discrete (PNP/NPN) or analog output signal.

Two detection modes:  Inductive sensors can operate via amplitude change (target approaching causes oscillation decay) or frequency change (different metals cause frequency shifts).

Inductive Proximity Sensor Types and Application Scenarios

Housing TypeThread / Size OptionsTypical Sensing DistanceKey Applications
Cylindrical (Threaded)M8 proximity sensor, M12, 12mm proximity sensor, M18, 30mm proximity sensor1 mm ~ 15 mmGeneral industrial automation, position detection, limit switching, conveyor systems.
Miniature∅3mm /∅4mm /M5 (Miniature type)0.8 mm ~ 1.0 mmPrecision mold positioning, micro-robotics, small-space assembly (ideal for miniature inductive proximity sensor applications).
Rectangular / BlockFlat panel mount5 mm ~ 8 mmHeavy vibration environments and applications requiring a rectangular proximity sensor for flat surface mounting.
Ring / DoughnutEmbedded (through-hole)Detects small passing objectsInductive ring sensor used for detecting steel balls, springs, rivets, screws, nuts, and broken wire detection.


Environmental Ratings (IP & Temperature):

  • IP Rating:  Rated IP67 proximity sensor (dust-tight and protected against temporary immersion) and IP68 (continuous immersion) options are available for washdown stations and outdoor use.
  • High-Temperature Models:  For extreme environments, we offer a specialized high-temperature proximity sensor and high-temperature inductive proximity sensor suitable for furnace-side operations, cold storage, and outdoor winter conditions (Standard: -25°C~+70°C; Wide-temp: -40°C~+100°C).
  • Built-in Anti-Interference:  Our sensor inductive proximity designs feature robust EMI resistance. Shielded (flush) versions are available to allow embedding into metal, while unshielded (non-flush) versions offer longer sensing ranges. Specific weld-immune proximity sensors are also available for welding environments.

How to Select an Inductive Proximity Sensor

When selecting a proximity switch, you must focus on four core dimensions: Target Metal Type → Sensing Distance (with margin) → Mounting Space (Thread Size) → Operating Environment (IP/Temperature/Interference).

DimensionKey ConsiderationsRecommendations
Target Metal MaterialFerrous metals (iron/steel) give the longest distance; non-ferrous metals (aluminum/copper) shorten it.For aluminum/copper, choose a long-range inductive proximity sensor, or select a Factor 1 (K1) model.
Sensing DistanceRated distance (Sn) is measured with standard mild steel.Always reserve a margin: select a sensor with a rated distance at least 2x your actual need.
Mounting SpaceDetermined by the available fixing hole diameter.Match the thread to your equipment. Tight spaces require miniature M4/M5 or ∅3/∅4 diameters.
EnvironmentMoisture = need IP67/IP68; extreme temps = need wide-temp; high EMI = need shielded/anti-EMI.Choose IP67 for washdown. Choose high-temperature models for furnaces/cold storage.


Target metal size requirement

  1. Per EN 60947-5-2, the standard target for rating inductive proximity sensors is a 1mm-thick square steel plate, with a side length equal to the larger of the sensor's sensing face diameter or three times the rated sensing distance (Sn).
  2. As a practical rule of thumb, the target metal object should be at least three times the diameter of the sensing face.
  3. Smaller targets reduce effective sensing distance significantly and may cause detection failure. For such applications, choose a smaller thread size (e.g., an 8 mm proximity sensor rather than 30 mm) or select a long-range inductive proximity sensor to compensate.

Inductive Proximity Sensors vs Capacitive Proximity Sensors

Parameter InductiveProximity SensorCapacitive Proximity Sensor
Detectable TargetsMetals onlyMetals, plastics, paper, liquids, powders, wood
Working PrincipleElectromagnetic induction (Eddy current)Changes in capacitance
Response FrequencyHigh (up to 2 kHz)Low to medium
Environmental StabilityUnaffected by dust, oil, or moistureAffected by humidity, temperature, and material buildup


Selection Principle:
  If your target is metal, always prioritize the inductive type. When comparing an inductive and capacitive proximity sensor, the inductive offers faster response and superior reliability in dirty environments.

FAQs about Inductive Proximity Sensors

Q1: What is the supply voltage range for a DC inductive proximity sensor and how to connect its 3-wire cable?
A1: Most DC-powered inductive proximity sensors operate on 10-30 VDC. The 3-wire cable uses brown for +V, blue for 0V, and black for the output signal. Two-wire versions wire the load in series with the supply but have higher residual voltage and minimum load current requirements.

Q2: What are the output differences for an inductive proximity sensor when choosing NPN, PNP, or 2-wire?
A2: NPN sinks to ground, PNP sources to +V, and 2-wire is simpler but less flexible. When an inductive proximity sensor appears to trigger early, this is usually not false triggering but a reduced effective distance caused by the target material: ferrous metals give 100% of rated range, while aluminum and copper attenuate to only 30-35%. Always select a sensor with extra margin to compensate.

Q3: What is the correct installation sequence for an inductive proximity sensor?
A3: Start by selecting shielded (flush) for embedding in metal or unshielded (non-flush) for longer range. Secure fixing nuts without over-tightening to avoid housing damage. Connect wires correctly: brown to +V, blue to 0V, and black to signal for 3-wire types. Complete the setup by testing the inductive proximity sensor with its built-in LED to verify output switching at the intended distance.

Q4: Why does an inductive proximity sensor behave erratically near motors or drives?
A4: Erratic operation near variable-frequency drives and contactors is caused by electromagnetic interference (EMI). Solutions for your inductive proximity sensor include choosing EMI-hardened models with built?in surge protection, using shielded cable, routing sensor wires separately from power cables, maintaining physical distance from noise sources, and performing on-site testing under full load to confirm stability.

View as Grid List
Sort by
Display per page

Proximity Sensor, Inductive, NPN, NO/NC, 4 mm

ATO-PROS-I4
$39.95
4mm proximity sensor can detect a variety of metals, miniature size, long life, low price, shielded type installation, anti-interference ability, 1mm detection distance, using for precise positioning of molds, precision machine tools and robots. The inductive proximity sensor is used to detect magnetic metals (for non-magnetic metals, the detection range is reduced).

Inductive Proximity Sensor, Metal Detection, PNP, M5

ATO-PROS-I5
$39.95
M5 inductive proximity sensor, shielded and flush-mountable, reliably detects ferrous metals like steel and iron and non-ferrous metals like aluminum and brass up to 1 mm non-contact. Its compact brass housing with potted electronics ensures IP67 resistance to dust, washdown, and coolant. Operating from -30°C to 65°C, it fits robotic tooling, cylinder sensing, and shaft monitoring.

Inductive Proximity Sensor, 2 Wire, 24VDC, M6

ATO-PROS-I6
$39.95
Affordable price M6 proximity sensor for sale online, small size and long life, can detect a variety of magnetic metals (for non-magnetic metals, the detection distance will be reduced), with a detection distance of 1mm. The sensor uses DC 24V power supply, supports shielded installation, strong anti-interference ability, protection level reaches IP67, and is suitable for various complex working conditions.

Proximity Sensor, Inductive, M8, 2 Wire, 120V

ATO-PROS-I8
$39.55
M8 proximity sensor can detect a variety of metals, small size, long life, cheap price, unshielded type installation, anti-interference ability, 2mm detection distance, supply voltage AC 120V, manufacturer direct sale. The 2-wire proximity sensor is an IP67 rated inductive proximity sensor for detecting magnetic metal objects (the detection distance for non-magnetic metals will be shorter).

Inductive Proximity Sensor, M12, NPN/PNP, NO/NC

ATO-PROS-I12
$38.79
M12 inductive proximity sensor can detect a variety of metals, small size, long life, anti-interference ability, shielded type installation, 2mm detection distance, manufacturer direct sale. The proximity sensor uses a nickel-plated brass shell (strong corrosion resistance) and ABS detection surface (impact resistance), and has an IP67 protection level, which can work stably in a variety of environments.

Proximity Sensor, Inductive, M18, 3 Wire, 120V

ATO-PROS-I18
$39.45
M18 inductive proximity sensor can detect a variety of metals, small size, long life, cheap price, unshielded type installation, anti-interference ability, 8mm detection distance, supply voltage AC 120V, manufacturer direct sale. The delay distance of the inductive proximity sensor is ≤10% of the detection range, and the protection level reaches IP67, which can operate reliably in harsh industrial environments.

Inductive Proximity Sensor for Metal, 2 Wire, M24, 12V-24V

ATO-PROS-I24
$39.75
M24 proximity sensor is compact and can stably detect a variety of metal objects with a standard detection distance of 10mm. It supports DC 12V-24V power supply and has IP67 protection level. The proximity sensor can be installed in unshielded type, has strong anti-interference ability and long service life, and is sold directly by the manufacturer.

Inductive Proximity Sensor, Metal Detection, PNP, M30

ATO-PROS-I30
$39.95
Factory price M30 proximity sensor features a 10mm detection distance, supports detection of various metals, and offers a compact size, long service life, strong anti-interference capability, and cost-effective performance. It adopts a shielded-type installation and is available for direct sale from the manufacturer.

Analog Output Proximity Sensor, Inductive, Flush/Non-flush, M12

ATO-PS-LR40SZ
$173.97
Economical price analog output proximity sensor with M12 connection type, analog inductive proximity sensor with flush, non-flush two installation for selection, rated distance 10mm/ 15mm. The inductive proximity sensor uses analog output and has an IP67 protection level, making it dustproof and waterproof. M12 proximity sensor has advantages of simple structure, high sensitivity, strong anti-interference ability and high measurement accuracy.

Analog Output Proximity Sensor, Inductive, M12 Connector/ Terminal Connection

ATO-PS-LR40XZ
$180.32
Inductive proximity sensor for sale online, with M12 connector/ terminal connection two connection types, detection range 2-10mm/ 3-15mm, switching frequency 100Hz/ 50Hz, linearity ≤±5%. The analog output proximity sensor is designed to operate reliably in a wide ambient temperature range of -25℃ to 70℃ and humidity levels from 35% to 95% RH, with an IP67 protection rating, suitable for various industrial environments.

Analog Output Proximity Sensor, Inductive, Square Type, 0-10V/ 0-20mA

ATO-PS-LE80XZ
$190.52
High quality analog output proximity sensor with rated distance 40mm/ 50mm, flush/ non-flush are optional, analog inductive sensor has M12 connector/ terminal connection two connection types to choose, detection range 8-40mm/ 10-50mm. The square type inductive proximity sensor with analog output, IP67 protection and PBT housing can be used in a variety of industrial environments.

Analog Output Proximity Sensor, Inductive, Flush/ Non-flush, IP67

ATO-PS-LR12X
$173.90
Reasonable price analog output proximity sensor online for sale, analog inductive sensor has flush/ non-flush two installation types for selection, three output methods can be chosen, M12 connector or 2m PVC cable two connection types. It has an IP67 protection level, and can operate reliably in dust and water vapor environments. M12 proximity sensor is widely used in displacement measurement, thickness measurement, material differentiation and other fields.

Analog Output Proximity Sensor, Inductive, M12 Connector/ 2m PVC Cable

ATO-PS-LR18X
$164.45
Good price proximity sensor for sales, with withstand voltage 1000V/ AC 50/ 60Hz 60s, two installation types (flush and non-flush) for selection, three output methods and two connection types can be chosen. The sensor has a repeatability of ≤±3%, and can maintain a stable output in multiple tests. It has advantages of light weight, small size and long service life.

Analog Output Inductive Proximity Sensor, Cylindrical, 0-10V/4-20mA

ATO-PS-LR30X
$173.97
Good price analog inductive proximity sensor with flush/ non-flush two installation types, supply voltage 15-30VDC, detection range 2-10mm/ 3-15mm, 0-10v/ 0-10v+0-20mA/ 0-20mA/ 4-20mA three output methods. M30 proximity sensor has an operating temperature range of -25℃ to 70℃ and IP67 protection level, making it suitable for various industrial environments.

Analog Output Inductive Proximity Sensor, M18, Flush/Non-flush

ATO-AIPS-LR18X
$164.45
Lower cost analog output proximity sensor for sale online. The inductive sensor analog output with flush/ non-flush two installation types for selection, M12 connector/ 2m PVC cable two connection types are available. The sensor supports a variety of analog signal output methods, including 0–10V, 0–20mA, 4–20mA and 0–10V+0–20mA. M18 proximity sensor has advantages of light weight, small size and long service life.

Inductive Proximity Sensor, Ring Type, 10mm, PNP

ATO-RTPS-T10
$127.78
High quality inductive proximity sensor at affordable price, ring type proximity sensor with 10mm diameter, NPN/ PNP/ 2 wire three output types for selection, embedded type installation, > 20MΩ insulation resistance and repeated accuracy ≤5%. The inductive ring sensor uses ABS plastic shell material, has IP67 protection level, and can operate stably in harsh industrial environments.

Inductive Proximity Sensor, Ring Type, 6mm, NPN

ATO-RTPS-T6
$124.60
Factory price inductive proximity sensor online for sale, with 6mm ring diameter, DC24V/ AC110V/ AC230V output voltage can be chosen, NPN/ PNP/ 2 wire three output types for selection. The ring inductive proximity sensor has IP67 protection level, and is dustproof and waterproof. Ring type proximity sensor is generally used to detect small objects, such as blanking detection, small steel balls, small springs, small rivets, metal wire breakage, wire breakage detection.

Inductive Proximity Sensor, Ring Type, 15mm, 2 Wire

ATO-RTPS-T15
$130.26
Inductive ring type proximity sensor at affordable price, operating voltage 10-36V, two lead wire types can be chosen. This ring proximity sensor has an IP67 protection level, is CE and RoHS certified, and has high reliability. The inductive ring sensor is generally used to detect small objects, such as blanking detection, small steel balls, small springs, small rivets, metal wire breakage, wire breakage detection.

Inductive Proximity Sensor, Ring Type, 21mm, M12

ATO-RTPS-T21
$135.77
Competitive price ring type proximity sensor with 12mm diameter, direct lead wire/ M12 connector two lead wire types can be chosen, 10-36V operating voiltage. The ring inductive proximity sensor uses ABS plastic shell material, has a high response frequency of 500Hz, and an operating environment temperature range of -20 to 80℃, which is suitable for various industrial environments.

Small Proximity Sensor, Inductive, NPN NO, M4/M5/φ3/φ4

ATO-SPS-I1S0
$57.26
Small inductive proximity sensors for sale online, with four specifications and models available: φ3, M4, φ4 and M5. Its detection distance covers the range of 0.6mm to 1.5mm, and it adopts NPN normally open (NO) output mode. It is IP67 certified and has a wide operating temperature range of -25℃ to +70℃. The compact design is particularly suitable for installation in small spaces and can be easily integrated into mechanical equipment.