Proximity Sensor, Inductive, NPN, NO/NC, 4 mm

$39.95
4mm proximity sensor can detect a variety of metals, miniature size, long life, low price, shielded type installation, anti-interference ability, 1mm detection distance, using for precise positioning of molds, precision machine tools and robots. The inductive proximity sensor is used to detect magnetic metals (for non-magnetic metals, the detection range is reduced).
SKU: ATO-PROS-I4
*
Free Shipping
Delivery date: 6-12 days

With a nickel-plated brass housing and ABS plastic detection surface, the inductive proximity switch has an IP67 protection rating and can be used for metal detection in a variety of industrial environments.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-4A1ZN
Installation typeShielded
All the output methodsDC typeNPNNO
NC
PNPNO
NC
2 wireNO
Detection range1mm±10%
Setting distance0-0.7mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 5*5*1mm
Response frequencyDC: 2kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive 4 mm dimensional drawing

Wiring diagram

Proximity sensor NPN wiring

Proximity sensor DC 2 wire wiring diagram

Tips: How to choose a proximity sensor?

Inductive proximity sensor and capacitive proximity sensor are often used in the general industrial sites. Because these two types of proximity sensors have lower standard on environment. If the detected object is a conductive object or an object fixed on metal, inductive proximity sensor will be generally chosen for its high response frequency, excellent anti-jamming performance, wide range of application and lower price. If the detected object is a non-metal (or metal), liquid height, powder height, plastic or tobacco etc, capacitive proximity sensor will be chosen for its low response frequency but good stability. On the occasion of better environment and non-dust pollution, photoelectric proximity sensor can be chosen because it almost has no effect on the detected object during operation. If the detected object is made from permeability magnetic material, or is buried of a magnet steel in order to distinguish the detected object from another object that moves together, Hall proximity sensor will be chosen due to its lowest price. Sometimes in order to improve the reliability of identification, the above-mentioned several proximity sensors are often used in combination.

ATO will use a proximity sensor and a digital counter to count number in the video.

In this video, ATO will show you top ten most used sensors (sensing technologies).

In this video, ATO will show you the  differences between inductive and magnetic types.

How to Use an Inductive Proximity Sensor?

This video demonstrates how to wire and use an inductive proximity sensor.

Product reviews
As expected
5
zhl
Avatar
4/26/2022 9:40 PM
Easy to wire, diagram on the device, worked perfect on a PVC tube to detect cartridge brass and stop feeder.
Was this review helpful? Yes No (0/0)
Easy to carry
5
Shaun
Avatar
1/9/2023 7:56 PM
I've had this sensor for six months. My colleague recommended this product to me. It is small and easy to carry and use at work. I will order more and recommend to my friends.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

With a nickel-plated brass housing and ABS plastic detection surface, the inductive proximity switch has an IP67 protection rating and can be used for metal detection in a variety of industrial environments.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-4A1ZN
Installation typeShielded
All the output methodsDC typeNPNNO
NC
PNPNO
NC
2 wireNO
Detection range1mm±10%
Setting distance0-0.7mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 5*5*1mm
Response frequencyDC: 2kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive 4 mm dimensional drawing

Wiring diagram

Proximity sensor NPN wiring

Proximity sensor DC 2 wire wiring diagram

Tips: How to choose a proximity sensor?

Inductive proximity sensor and capacitive proximity sensor are often used in the general industrial sites. Because these two types of proximity sensors have lower standard on environment. If the detected object is a conductive object or an object fixed on metal, inductive proximity sensor will be generally chosen for its high response frequency, excellent anti-jamming performance, wide range of application and lower price. If the detected object is a non-metal (or metal), liquid height, powder height, plastic or tobacco etc, capacitive proximity sensor will be chosen for its low response frequency but good stability. On the occasion of better environment and non-dust pollution, photoelectric proximity sensor can be chosen because it almost has no effect on the detected object during operation. If the detected object is made from permeability magnetic material, or is buried of a magnet steel in order to distinguish the detected object from another object that moves together, Hall proximity sensor will be chosen due to its lowest price. Sometimes in order to improve the reliability of identification, the above-mentioned several proximity sensors are often used in combination.

Product reviews
As expected
5
zhl
Avatar
4/26/2022 9:40 PM
Easy to wire, diagram on the device, worked perfect on a PVC tube to detect cartridge brass and stop feeder.
Was this review helpful? Yes No (0/0)
Easy to carry
5
Shaun
Avatar
1/9/2023 7:56 PM
I've had this sensor for six months. My colleague recommended this product to me. It is small and easy to carry and use at work. I will order more and recommend to my friends.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Inductive Proximity Sensor, Metal Detection, PNP, M5

ATO-PROS-I5
$39.95
M5 inductive proximity sensor, shielded and flush-mountable, reliably detects ferrous metals like steel and iron and non-ferrous metals like aluminum and brass up to 1 mm non-contact. Its compact brass housing with potted electronics ensures IP67 resistance to dust, washdown, and coolant. Operating from -30°C to 65°C, it fits robotic tooling, cylinder sensing, and shaft monitoring.

Capacitive Proximity Sensor, M12, PNP, NO/NC

ATO-PROS-C12
$39.99
M12 proximity sensor can detect non-metallic (such as plastics, liquids) and metallic materials, and is suitable for liquid level monitoring, powder height measurement, etc. Capacitive proximity sensor adopts an unshielded installation design, a detection distance of 5mm, an IP67 protection level, strong anti-interference, compact size and long life.