Inductive Proximity Sensor, M12, NPN/PNP, NO/NC

$38.79
M12 inductive proximity sensor can detect a variety of metals, small size, long life, anti-interference ability, shielded type installation, 2mm detection distance, manufacturer direct sale. The proximity sensor uses a nickel-plated brass shell (strong corrosion resistance) and ABS detection surface (impact resistance), and has an IP67 protection level, which can work stably in a variety of environments.
SKU: ATO-PROS-I12
*
Free Shipping
Delivery date: 6-12 days

Inductive proximity sensor with M12*1 thread, NPN type output, manufacturer direct sale. Within ±15% of the rated supply voltage, the sensor maintains a detection distance variation within ±10% of the rated value.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-12A2ZN
Installation typeShieldedUnshielded
All the output methodsDC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 wireNONO
NCNC
AC type2 wireNONO
NCNC
Detection range2mm±10%4mm±10%
Setting distance0-1.6mm0-3.6mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 12*12*1mmIron 15*15*1mm
Response frequencyDC: 1kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive M12 dimensional drawing

Wiring diagram

Proximity sensor NPN wiring
Tips: What are the differences between shielded and unshielded proximity sensor?

The shielded proximity sensor is equipped with a metal shielding layer around the sensing head, which only allows the electromagnetic field to be emitted straight ahead, and is suitable for installation on metal surfaces, such as CNC milling machines, servo motor drive modules and other equipment. This type of sensor supports flush installation and has strong anti-electromagnetic interference capabilities. It is often used in industrial environments with high precision, limited space or more metal interference.

The unshielded proximity sensor has no shielding layer, and the electromagnetic field can spread to the front and sides, with a longer sensing distance, but it is not suitable for installation close to metal to avoid false triggering. It is widely used in automatic packaging machines, logistics conveyor lines, intelligent warehousing systems and other equipment, suitable for applications with open space, less interference, and requiring a larger sensing distance.

ATO will use a proximity sensor and a digital counter to count number in the video.

In this video, ATO will show you top ten most used sensors (sensing technologies).

In this video, ATO will show you the  differences between inductive and magnetic types.

How to Use an Inductive Proximity Sensor?

This video demonstrates how to wire and use an inductive proximity sensor.

Product reviews
Useful for me
5
Bonnie
Avatar
8/6/2021 3:04 AM
I bought a lamp to transform my disinfection cabinet. Ultraviolet radiation is harmful to human body, so I chose ATO proximity sensor. After installing, the door will automatically turn off the light, which is safe and assured. It's worth buying.
Was this review helpful? Yes No (0/0)
A very nice sensor
4
Ross
Avatar
10/20/2025 9:17 PM
Works just like described. I used it on my small CNC project, and it detects metal parts very accurately. The build quality feels solid, and it hasn’t had any false triggers so far.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Inductive proximity sensor with M12*1 thread, NPN type output, manufacturer direct sale. Within ±15% of the rated supply voltage, the sensor maintains a detection distance variation within ±10% of the rated value.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-12A2ZN
Installation typeShieldedUnshielded
All the output methodsDC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 wireNONO
NCNC
AC type2 wireNONO
NCNC
Detection range2mm±10%4mm±10%
Setting distance0-1.6mm0-3.6mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 12*12*1mmIron 15*15*1mm
Response frequencyDC: 1kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive M12 dimensional drawing

Wiring diagram

Proximity sensor NPN wiring
Tips: What are the differences between shielded and unshielded proximity sensor?

The shielded proximity sensor is equipped with a metal shielding layer around the sensing head, which only allows the electromagnetic field to be emitted straight ahead, and is suitable for installation on metal surfaces, such as CNC milling machines, servo motor drive modules and other equipment. This type of sensor supports flush installation and has strong anti-electromagnetic interference capabilities. It is often used in industrial environments with high precision, limited space or more metal interference.

The unshielded proximity sensor has no shielding layer, and the electromagnetic field can spread to the front and sides, with a longer sensing distance, but it is not suitable for installation close to metal to avoid false triggering. It is widely used in automatic packaging machines, logistics conveyor lines, intelligent warehousing systems and other equipment, suitable for applications with open space, less interference, and requiring a larger sensing distance.

Product reviews
Useful for me
5
Bonnie
Avatar
8/6/2021 3:04 AM
I bought a lamp to transform my disinfection cabinet. Ultraviolet radiation is harmful to human body, so I chose ATO proximity sensor. After installing, the door will automatically turn off the light, which is safe and assured. It's worth buying.
Was this review helpful? Yes No (0/0)
A very nice sensor
4
Ross
Avatar
10/20/2025 9:17 PM
Works just like described. I used it on my small CNC project, and it detects metal parts very accurately. The build quality feels solid, and it hasn’t had any false triggers so far.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Inductive Proximity Sensor, 2 Wire, 24VDC, M6

ATO-PROS-I6
$39.95
Affordable price M6 proximity sensor for sale online, small size and long life, can detect a variety of magnetic metals (for non-magnetic metals, the detection distance will be reduced), with a detection distance of 1mm. The sensor uses DC 24V power supply, supports shielded installation, strong anti-interference ability, protection level reaches IP67, and is suitable for various complex working conditions.

Analog Output Proximity Sensor, Inductive, M12 Connector/ 2m PVC Cable

ATO-PS-LR18X
$164.45
Good price proximity sensor for sales, with withstand voltage 1000V/ AC 50/ 60Hz 60s, two installation types (flush and non-flush) for selection, three output methods and two connection types can be chosen. The sensor has a repeatability of ≤±3%, and can maintain a stable output in multiple tests. It has advantages of light weight, small size and long service life.

Hall Magnetic Proximity Sensor, M8, NPN/ PNP, Sensing Distance 8mm

ATO-MPS-M8
$75.79
Affordable price Hall magnetic proximity sensor provides long-range detection and can reliably detect magnetic objects. It has NPN NO/NC or PNP NO/NC signal output, is flush installation type, has an 8 mm detection distance, a yellow LED indicator and an M8 threaded. The sensor features a durable stainless-steel housing and a protection degree of IP67.

Small Proximity Sensor, Inductive, NPN NO, M4/M5/φ3/φ4

ATO-SPS-I1S0
$57.26
Small inductive proximity sensors for sale online, with four specifications and models available: φ3, M4, φ4 and M5. Its detection distance covers the range of 0.6mm to 1.5mm, and it adopts NPN normally open (NO) output mode. It is IP67 certified and has a wide operating temperature range of -25℃ to +70℃. The compact design is particularly suitable for installation in small spaces and can be easily integrated into mechanical equipment.