Proximity Sensor, Inductive, M18, 3 Wire, 120V

$39.45
M18 inductive proximity sensor can detect a variety of metals, small size, long life, cheap price, unshielded type installation, anti-interference ability, 8mm detection distance, supply voltage AC 120V, manufacturer direct sale. The delay distance of the inductive proximity sensor is ≤10% of the detection range, and the protection level reaches IP67, which can operate reliably in harsh industrial environments.
SKU: ATO-PROS-I18
*
Free Shipping
Delivery date: 6-12 days

Inductive proximity sensor with M18*1 thread, AC 3 wire output, manufacturer direct sale. The inductive proximity sensor detects magnetic metals, and the detection distance for non-magnetic metals is shortened. It has high performance and accuracy in detecting ferrous materials in industrial environments.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-18A8JA3
Installation typeUnshieldedShielded
All the output methodsDC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 wireNONO
NCNC
AC type2 wireNONO
NCNC
3 wireNO+NCNO+NC
Detection range8mm±10%5mm±10%
Setting distance0-7mm0-4mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 18*18*1mm
Response frequencyDC: 0.8kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive M18 dimensional drawing

Wiring diagram

Proximity sensor AC 3 wire wiring

Tips: The current and voltage of proximity sensor

  1. No-load current (IO): The current consumption measured in no-load condition.
  2. Operating current (IL): The maximum load current measured in the condition of proximity sensor continuously working.
  3. Instantaneous current (IK): The permissible current that appears in a short time and doesn't damage the proximity sensor, when the proximity sensor is closed.
  4. Residual current (IR): The current that goes through the load, when the proximity sensor is disconnected.
  5. Operating voltage (UB): It means the maximum and minimum value of the operating voltage. In this range, the proximity sensor can ensure the safe operation.

ATO will use a proximity sensor and a digital counter to count number in the video.

In this video, ATO will show you top ten most used sensors (sensing technologies).

In this video, ATO will show you the  differences between inductive and magnetic types.

How to Use an Inductive Proximity Sensor?

This video demonstrates how to wire and use an inductive proximity sensor.

Product reviews
How is it powered?
5
Max
Avatar
4/26/2022 7:51 PM
Is this sensor measuring a distance and sending out the data or is it only sending a signal when a specific distance is achieved? How is it powered? I am looking for a small assembled prox sensor to detect when an object is 1-2 inches away.
Was this review helpful? Yes No (0/0)
ATO Responded
It's not sending out data. Here is the supply: voltage  DC 12-24V (6-36V), AC 110-220V  (90-250V).
Maximum Mounting Torque
5
Lunes
Avatar
4/21/2026 1:53 AM
We plan to purchase a proximity sensor (inductive, M18 thread, two-wire, 120V) from ATO, but we need to know its maximum mounting torque to determine if it is suitable for our application. Thank you very much for your help.
Was this review helpful? Yes No (0/0)
ATO Responded
Regarding the ATOM18 specification inductive proximity sensor (SKU: ATO-PROS-I18) you mentioned, we recommend a maximum thread mounting torque between 20 N·m and 40 N·m, with around 30 N·m generally considered the safest.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Inductive proximity sensor with M18*1 thread, AC 3 wire output, manufacturer direct sale. The inductive proximity sensor detects magnetic metals, and the detection distance for non-magnetic metals is shortened. It has high performance and accuracy in detecting ferrous materials in industrial environments.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-18A8JA3
Installation typeUnshieldedShielded
All the output methodsDC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 wireNONO
NCNC
AC type2 wireNONO
NCNC
3 wireNO+NCNO+NC
Detection range8mm±10%5mm±10%
Setting distance0-7mm0-4mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 18*18*1mm
Response frequencyDC: 0.8kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive M18 dimensional drawing

Wiring diagram

Proximity sensor AC 3 wire wiring

Tips: The current and voltage of proximity sensor

  1. No-load current (IO): The current consumption measured in no-load condition.
  2. Operating current (IL): The maximum load current measured in the condition of proximity sensor continuously working.
  3. Instantaneous current (IK): The permissible current that appears in a short time and doesn't damage the proximity sensor, when the proximity sensor is closed.
  4. Residual current (IR): The current that goes through the load, when the proximity sensor is disconnected.
  5. Operating voltage (UB): It means the maximum and minimum value of the operating voltage. In this range, the proximity sensor can ensure the safe operation.
Product reviews
How is it powered?
5
Max
Avatar
4/26/2022 7:51 PM
Is this sensor measuring a distance and sending out the data or is it only sending a signal when a specific distance is achieved? How is it powered? I am looking for a small assembled prox sensor to detect when an object is 1-2 inches away.
Was this review helpful? Yes No (0/0)
ATO Responded
It's not sending out data. Here is the supply: voltage  DC 12-24V (6-36V), AC 110-220V  (90-250V).
Maximum Mounting Torque
5
Lunes
Avatar
4/21/2026 1:53 AM
We plan to purchase a proximity sensor (inductive, M18 thread, two-wire, 120V) from ATO, but we need to know its maximum mounting torque to determine if it is suitable for our application. Thank you very much for your help.
Was this review helpful? Yes No (0/0)
ATO Responded
Regarding the ATOM18 specification inductive proximity sensor (SKU: ATO-PROS-I18) you mentioned, we recommend a maximum thread mounting torque between 20 N·m and 40 N·m, with around 30 N·m generally considered the safest.
Only registered users can write reviews
Customers who bought this item also bought

Capacitive Proximity Sensor, M18, NPN, NO/NC

ATO-PROS-C18
$39.29
M18 proximity sensor is an industrial proximity sensor with an unshielded type installation. It can detect both metal and non-metallic materials (including plastics, liquids and powder media). The proximity sensor has a detection distance of 10mm, a wide temperature operating range of -30~65℃ (non-freezing or condensation), a compact size, and good anti-interference performance.

Electromagnetic Relay, 8-pin DPDT, 12V/24V/110V/220V

ATO-EMR-13F2Z
$53.77
Available for 12V/24V DC, 110V/220V AC coil voltage, electromagnetic relay features DPDT contact configuration, 8 pins with plug-in terminals, contact load 10A/240V AC 28V DC. Favorable price and high quality.