Inductive proximity sensor with M24*1.5 thread, DC 2 wire output, manufacturer direct sale. The operating temperature range of the proximity sensor is -30~65℃ (non-freezing or condensation), and the operating humidity range is 35~95%RH.
Functions
- Red LED checks the state of proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
Specification
| Model | ATO-PSI-24A10ZD | |||
| Installation type | Unshielded | Shielded | ||
| All the output methods | DC type | NPN | NO | NO |
| NC | NC | |||
| NO+NC | NO+NC | |||
| PNP | NO | NO | ||
| NC | NC | |||
| NO+NC | NO+NC | |||
| 2 wire | NO | NO | ||
| NC | NC | |||
| AC type | 2 wire | NO | NO | |
| NC | NC | |||
| 3 wire | NO+NC | NO+NC | ||
| Detection range | 10mm±10% | 8mm±10% | ||
| Setting distance | 0-8mm | 0-7mm | ||
| Delay distance | ≤10% detection range | |||
| Detection object | Magnetic metal (the detection distance decreases when it is non-magnetic metal) | |||
| Object attenuation coeffient | Steel: 1.0, Stainless steel: 0.85, Aluminum: 0.4, Brass: 0.4, Bronze: 0.3 | |||
| Standard detection object | Iron24*24*1mm | |||
| Response frequency | DC: 0.8kHz, AC: 50Hz | |||
| Supply voltage | DC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz | |||
| Withstand voltage | AC1000V 50/60Hz 1min between charging part and housing | |||
| Voltage influence | Inside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance | |||
| Consumption current | N/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA | |||
| Control output | N/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA | |||
| Loop protection | N/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption | |||
| Ambient temperature & humidity | Operation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH | |||
| Temperature influence | Temperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance | |||
| Insulation impedance | ≥50MΩ (DC500 megameter) between charging part and housing | |||
| Material | Housing: Nickel plated brass, Detection surface: ABS | |||
| Protection class | IP67 | |||
| Cable length | 1.2m | |||
Dimensional drawing (unit: mm)

Wiring diagram

Tips: Unshielded proximity sensor installation notes
The installation of unshielded proximity sensor will encounter many problems. For example, there is interference between proximity sensor and mounting bracket and mutual interference between proximity sensors etc.
- If a proximity sensor is installed in a metal bracket, its height of proximity sensor should be more than two times longer than the detection distance. The surrounding metal distance should be as long as the diameter of proximity sensor in order to avoid the influence of bracket.
- As for the distance between proximity sensors, the face to face installation distance should be two times longer than the detection distance and the side-by-side distance should be two times longer than the diameter of proximity sensor.
- After installation, appropriate testing and measurements can be performed to ensure that the proximity sensor can operate accurately and is not interfered with by surrounding metal objects or adjacent sensors.
Customers who bought this item also bought
DC Current Sensor 1mA/1A/5A/10A/100A to 800A
ATO-CUS-DC800
$85.56
DC current sensor has best cost performance, fast response, high accuracy, good stability, small size, light weight, DIN rail installation, widely used for DC current measurement of various occasions.
Small Linear Actuator, 12V/24V, 2500N, 250mm Stroke
ATO-LACTU-2500
$197.21
Small linear actuator with 12V, 24V DC, 2500N max load capacity, 35W output power, 250mm stroke, installation dimension is stroke +125mm, other strokes are optional, it can be used in various applications where space is limited.
DC-DC Boost Converter, 12V to 15V/19V/20V
ATO-DCDC-1219
$56.51
Economical price DC-DC power converter for sale. This boost converter is a DC power supply with wide input volt range of 9V to 16V or 9V to 36V, designed to step up the input rated voltage 12V DC to 15V/ 19V/ 20V output voltage, high conversion efficiency up to 95%, compact size, and different output currents are available for selection.
DC Current Sensor 50A/100A/200A/500A/1000A to 1500A
ATO-CUS-DC1500
$83.25
Hall effect DC current sensors are open loop current sensors, with split-core structure, 1ms fast response time, 1.0%FS accuracy, 4-20mA output signal, 12V/24V power supply, fixed installation, excellent linearity and strong anti-interference capacity. DC current sensors are widely used for DC current monitoring, system signal acquisition and feedback control.