Inductive Proximity Sensor, Metal Detection, PNP, M30

$39.95
Factory price M30 proximity sensor features a 10mm detection distance, supports detection of various metals, and offers a compact size, long service life, strong anti-interference capability, and cost-effective performance. It adopts a shielded-type installation and is available for direct sale from the manufacturer.
SKU: ATO-PROS-I30
*
Free Shipping
Delivery date: 6-12 days

Inductive proximity sensor with M30*1.5 thread, PNP type output, manufacturer direct sale. This M30 proximity sensor is an IP67 rated inductive proximity sensor for detecting magnetic metal objects.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-30A10ZP
Installation typeShieldedUnshielded
All the output methodsDC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 wireNONO
NCNC
AC type2 wireNONO
NCNC
3 wireNO+NCNO+NC
Detection range10mm±10%15mm±10%
Setting distance0-8mm0-13mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 30*30*1mmIron 54*54*1mm
Response frequencyDC: 0.5kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive M30 dimensional drawin

Wiring diagram

Proximity sensor PNP wiring

Tips: Proximity sensor's common problems on detect distance

  1. Proximity sensor can't detect the distance of detected object.
  2. Sensor is installed within the detection range with unstable signal in the actual detection (sometimes detectable and sometimes undetectable).
  3. Actual detection distance is different from the standard detection distance indicated in sensor (or less than the detection distance, or larger than the detection distance).

Since there is a certain tolerance detection distance in proximity sensor that is 10% of the standard detection distance, that is to say, the detected object installed at the maximum distance could be influenced by its material so that the perception of sensor is at the critical point, causing the object sometime detectable and sometimes not. In addition, some industrial equipment or detected object has certain distance deviation in the process of operation or swinging. If a detected object is installed at the maximum detection distance, there could be a malfunction or bad reception.

ATO will use a proximity sensor and a digital counter to count number in the video.

In this video, ATO will show you top ten most used sensors (sensing technologies).

In this video, ATO will show you the  differences between inductive and magnetic types.

How to Use an Inductive Proximity Sensor?

This video demonstrates how to wire and use an inductive proximity sensor.

Product reviews
M30 proximity sensor detects the distance
5
Baran
Avatar
9/5/2021 9:54 PM
Will the M30 proximity sensor detect passing plastic bottles and aluminum cans?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it is completely possible, but the detection distance may be biased.
About inductive sensor
5
Yangon
Avatar
8/7/2024 3:26 AM
I need to know if you carry inductive sensor 120V two or three wires. About 20 to 30mm of sensing.
Was this review helpful? Yes No (0/0)
ATO Responded
For inductive sensor 120V two or three wires, we recommend SKU: ATO-PROS-I30, the maximum detection distance is 15mm±10%.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Inductive proximity sensor with M30*1.5 thread, PNP type output, manufacturer direct sale. This M30 proximity sensor is an IP67 rated inductive proximity sensor for detecting magnetic metal objects.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specification

ModelATO-PSI-30A10ZP
Installation typeShieldedUnshielded
All the output methodsDC typeNPNNONO
NCNC
NO+NCNO+NC
PNPNONO
NCNC
NO+NCNO+NC
2 wireNONO
NCNC
AC type2 wireNONO
NCNC
3 wireNO+NCNO+NC
Detection range10mm±10%15mm±10%
Setting distance0-8mm0-13mm
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 30*30*1mmIron 54*54*1mm
Response frequencyDC: 0.5kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor inductive M30 dimensional drawin

Wiring diagram

Proximity sensor PNP wiring

Tips: Proximity sensor's common problems on detect distance

  1. Proximity sensor can't detect the distance of detected object.
  2. Sensor is installed within the detection range with unstable signal in the actual detection (sometimes detectable and sometimes undetectable).
  3. Actual detection distance is different from the standard detection distance indicated in sensor (or less than the detection distance, or larger than the detection distance).

Since there is a certain tolerance detection distance in proximity sensor that is 10% of the standard detection distance, that is to say, the detected object installed at the maximum distance could be influenced by its material so that the perception of sensor is at the critical point, causing the object sometime detectable and sometimes not. In addition, some industrial equipment or detected object has certain distance deviation in the process of operation or swinging. If a detected object is installed at the maximum detection distance, there could be a malfunction or bad reception.

Product reviews
M30 proximity sensor detects the distance
5
Baran
Avatar
9/5/2021 9:54 PM
Will the M30 proximity sensor detect passing plastic bottles and aluminum cans?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it is completely possible, but the detection distance may be biased.
About inductive sensor
5
Yangon
Avatar
8/7/2024 3:26 AM
I need to know if you carry inductive sensor 120V two or three wires. About 20 to 30mm of sensing.
Was this review helpful? Yes No (0/0)
ATO Responded
For inductive sensor 120V two or three wires, we recommend SKU: ATO-PROS-I30, the maximum detection distance is 15mm±10%.
Only registered users can write reviews