AC/DC voltage sensor has measuring range of AC/DC 75mV/30V/50V/100V/250V/300V to 500V.
Specification:
| Model | ATO-WBV122S01 | ATO-WBV124S01 | ATO-WBV125S01 | ATO-WBV127S01 |
| Shipping weight | 1kg | |||
| Measuring range of input voltage * | AC/DC 0-75mV ~ 0-500V | |||
| Short-time overload | 2 times of nominal input voltage, 1s in duration, interval time 10s, repeat 10 times | |||
| Linear measurement range | 0% ~ 120% measuring range | |||
| Frequency range | ±DC/20Hz ~ 10kHz | |||
| Input impedance | When Ux>1V, Ri=Ux*10kΩ/V; when Ux≤1V, Ri≥1MΩ | |||
| Output signal * | DC 0-5V, 0-10V (only for power supply DC 24V) | DC 4-20mA, 0-20mA | True RMS DC 0-5V, 0-10V (only for power supply DC 24V) | True RMS DC 4-20mA, 0-20mA |
| Power supply * | DC 12V±10%, DC 24V±10% | |||
| Accuracy | 0.5%F.S. | |||
| Load capacity | 5mA | 6V | 5mA | 6V |
| Response time | ≤250ms | |||
| Temperature drift | 250*10-6/℃ | 300*10-6/℃ | 250*10-6/℃ | 300*10-6/℃ |
| Static current | ≤34mA | Output 0-20mA: ≤34mA Output 4-20mA: ≤38mA | ≤30mA | ≤40mA |
| Isolation features | Isolation between input and output, output terminals provides power supply | |||
| Isolation voltage | DC 1.5kV, 1 min | |||
| Work temperature | -25~+70℃ | -25~+70℃ | 0~+50℃ | 0~+50℃ |
| Storage temperature | -25~+70℃ | -25~+70℃ | -25~+70℃ | -25~+70℃ |
| Input/Output isolation capacitance | - | 6pF (below 1kHz) | ||
| Common mode rejection ratio (CMRR) | - | 160dB (under condition of 50Hz) | ||
| Protection class | IP20 | |||
| Mean time between failures | >50000h | |||
| Housing material | Fire-retardant ABS | |||
| Wiring | Terminal connection | |||
| Installation | DIN rail (NS35/7.5, NS35/15, EN50022), or screw (M3) fixation | |||
AC/DC voltage sensor 75mV to 500V dimensional drawing (unit: mm):
AC/DC voltage sensor 75mV to 500V wiring diagram:
(The left diagram is for voltage output, the right diagram is for current output.)
Tips: How to install the voltage sensor?
There are 3 installation methods of voltage sensor:
- Pin-welding installation of the circuit board: Make lines on the circuit board, and weld the voltage sensor to the circuit board like a component. Its advantages are small size, light weight, space saving and easy installation.
- Screw fixation installation: The voltage sensor is screwed to the bottom of the chassis or a fixed position, and the external connection is through a variety of different terminals. The advantages are very firm and easy to disassemble.
- DIN rail installation: There is a standard 35mm wide dovetail groove on the bottom of the voltage sensor, which can be installed at DIN rail. Its advantages are convenient, versatile, and suitable for field work installation.
Product reviews
Good voltage sensor
Rudra
7/26/2021 2:12 AM
Very easy to use and clear installation. The AC voltage sensor works perfectly and is very affordable. It’s very suitable to drive the motors for a robot. If it needs to be used for larger motors, I could choose one with a larger measuring range. The instructions for use are very detailed. I am going to buy a few more.
Was this review helpful? (0/0)
Sine wave converting
Citrali
1/15/2025 2:11 AM
Hello, I am looking to convert a 3 phase 300VAC sine wave down to a 0 to 10VAC sine wave to connect to a DAQ that has an analog input range 0f - 10 volts. I'm looking to make measurements of the actual sine wave for power quality measurements. I am not powering anything. I am only taking measurements. Help would be appreciated. Thanks.
Was this review helpful? (0/0)
Voltage Data
Heller
11/4/2025 7:16 PM
I am interested in the ATO-VOS-ACDC500: Can this device measure sinusoidal signals up to 10 V RMS (frequency range 1 kHz to 3.5 kHz) and provide an analog output (0–10 V DC) proportional to the RMS voltage for the data acquisition system to read?
Was this review helpful? (0/0)
Measurement range
Modic
4/8/2026 9:17 PM
Can the measurement range of this AC/DC voltage sensor (75mV to 500V, RMS output 0-5V/0-10V/4-20mA/0-20mA) be set to: 0-300V, output signal: 0-5V, power supply: 12V DC?
Was this review helpful? (0/0)
Integration with PLC
Keske
7/2/2026 12:14 AM
Some of our machines use 40V batteries. When the battery is low, a regular charger won't work, and we need to use a portable charger for jump-charging. I'm looking for a function that can be integrated into the PLC to display a message on the HMI when the battery is about to run out.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
DC Current Sensor 1mA/1A/5A/10A/100A to 800A
ATO-CUS-DC800
$85.56
DC current sensor has best cost performance, fast response, high accuracy, good stability, small size, light weight, DIN rail installation, widely used for DC current measurement of various occasions.
AC Current Sensor, 5mA/100mA/1A/2A/5A to 10A
ATO-CUS-AC10
$72.63
AC current sensor adopts linear photoelectric isolation or modulation and demodulation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, input current terminal connection, DIN rail installation, widely used for AC current measurement of various occasions.
AC Current Sensor, 1A/2A/10A/30A/50A/100A to 150A
ATO-CUS-AC150
$76.35
AC current sensor adopts linear electromagnetic isolation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, 4mm/8mm/12mm/15mm hole diameter, and DIN rail installation. AC current sensor is widely used for AC current measurement of various occasions, especially for sine-wave ac current with power frequency 50Hz.
Hall Effect Current Sensor 50A/100A/200A/500A/800A/1000A
ATO-CUS-ACDC2000
$77.75
Hall effect current sensors are AC/DC universal current sensors, through-hole design, 1.0%FS accuracy, 0-4V/0-5V output signal, ±15V power supply, 5us fast response time, fixed installation. Open loop current sensors are widely used for AC/DC current measurement of VFD/DC motor drive/servo control system.
3 Phase AC Voltage Transducer 10V to 500V, Output 0-5V/4-20mA/0-20mA
ATO-VOS-3AC500
$177.78
3 phase AC voltage transducer is a special voltage sensor for three-phase AC voltage measurement. Voltage transducer has a measuring range from AC 10V to 500V, supply voltage DC 12V/24V, output signal DC 0-5V/0-20mA/4-20mA. 3 phase voltage transducer is mainly used for power monitoring, power control and dispatching systems in petroleum, coal, metallurgy, railway and other industries.