AC Voltage Transducer, Range 10V to 500V, Power Supply AC/DC 120V/240V

$183.17
AC voltage transducers are input/output/power supply isolated voltage transducers, with measuring range from 10V/50V/100V/200V/300V to 500V, wide power supply voltage AC/DC 85V~265V, work temperature -25~+70℃, frequency range 25Hz ~ 1kHz, and strong anti-interference capability.
SKU: ATO-VOS-AC500
*
*
Free Shipping
Delivery date: 8-12 days

AC voltage transducer has measuring range of 10V/50V/100V/200V/300V to 500V.

Specification:

ModelATO-WBV412H29ATO-WBV414H29
Shipping weight1kg
Measuring range of input voltage *AC 0-10V ~ 0-500V
Short-time overload2 times of nominal input voltage, 1s in duration, interval time 10s, repeat 10 times
Linear measurement range0% ~ 120% measuring range
Frequency range25Hz ~ 1kHz
Output signal *DC 0-5V, 0-10V, 1-5VDC 4-20mA, 0-20mA
Power supplyAC/DC 85V~265V
Accuracy0.2%F.S.0.5%F.S.
Load capacity6mA≤500Ω
Response time≤200ms
Temperature drift350*10-6/℃
Output ripple voltage≤10mV
Isolation featuresIsolation between input, output and power supply
Isolation voltageInput and output: DC 2.5kV, 1min
Power supply and input: DC 2.5kV, 1 min
Power supply and output: DC 2.5kV, 1 min
Work temperature-25~+70℃
Storage temperature-40~+85℃
Protection featuresEMC standards: EN61326: 2006
Safety standards: EN60100:2001
Mean time between failures>50000h
Housing materialFire-retardant ABS
WiringTerminal connection
InstallationDIN rail (NS35/7.5, NS35/15, EN50022)

Voltage transducer AC 10V to 500V dimensional drawing (unit: mm):
AC voltage transducer 10V to 500V power supply AC/DC 120V/240V dimension
Voltage transducer AC 10V to 500V wiring diagram:
AC voltage transducer 10V to 500V power supply AC/DC 120V/240V wiring

Details

Voltage Sensor Details

Tips: How to calculate the external resistance value of the voltage sensor?

When the magnetic balance voltage sensor is applied, the measured voltage is converted into the rated input current for measurement, and an external resistance needs to be added. The calculation is as follows:

Example: Use a voltage sensor to measure 220V voltage.
Because: The rated input current of the voltage sensor Ii=10mA, the internal resistance of the primary side Ri=430Ω. Now to measure the voltage Ui=220V, the external resistance R needs to be calculated.
Solution: R=V/Ii-Ri=220V/10mA-430Ω=21.57kΩ
Considering the standardization of the resistance, choose the external resistance R=22kΩ.

From this point of view, when measuring voltages above 100 volts, the simple calculation method in engineering is R=Ui/Ii. However, if the accuracy error of the entire measurement system is considered, it should be calculated strictly according to the above method. The user does some simple calculations according to the usage, so that the voltage transducers are in the best working state.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Price is worth it.
5
June
Avatar
7/14/2021 3:10 AM
Perfect product! I bought a 0-50V AC voltage sensor. The quality and use experience are very perfect. Its anti-interference ability is very useful for my car project. I will order again because ATO is a good seller.
Was this review helpful? Yes No (0/0)
Voltage transducer works as described
5
anna
Avatar
10/26/2022 2:55 AM
Works like it should, I can apply it for my work industrial distance measurement. So happy to see its accurate automatic detection. Its strong anti-interference capability can reach our expectation. Work great and easy to install.
Was this review helpful? Yes No (0/0)
DC Sensor
5
Vilkesh
Avatar
6/1/2026 9:32 PM
Is this a DC sensor? The SKU is listed as ATO-VOS-AC500 AC sensor. I need a DC sensor, not an AC sensor.
Was this review helpful? Yes No (0/0)
ATO Responded
This voltage sensor is AC/DC compatible; the device operates on a DC 12V/24V power supply.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

AC voltage transducer has measuring range of 10V/50V/100V/200V/300V to 500V.

Specification:

ModelATO-WBV412H29ATO-WBV414H29
Shipping weight1kg
Measuring range of input voltage *AC 0-10V ~ 0-500V
Short-time overload2 times of nominal input voltage, 1s in duration, interval time 10s, repeat 10 times
Linear measurement range0% ~ 120% measuring range
Frequency range25Hz ~ 1kHz
Output signal *DC 0-5V, 0-10V, 1-5VDC 4-20mA, 0-20mA
Power supplyAC/DC 85V~265V
Accuracy0.2%F.S.0.5%F.S.
Load capacity6mA≤500Ω
Response time≤200ms
Temperature drift350*10-6/℃
Output ripple voltage≤10mV
Isolation featuresIsolation between input, output and power supply
Isolation voltageInput and output: DC 2.5kV, 1min
Power supply and input: DC 2.5kV, 1 min
Power supply and output: DC 2.5kV, 1 min
Work temperature-25~+70℃
Storage temperature-40~+85℃
Protection featuresEMC standards: EN61326: 2006
Safety standards: EN60100:2001
Mean time between failures>50000h
Housing materialFire-retardant ABS
WiringTerminal connection
InstallationDIN rail (NS35/7.5, NS35/15, EN50022)

Voltage transducer AC 10V to 500V dimensional drawing (unit: mm):
AC voltage transducer 10V to 500V power supply AC/DC 120V/240V dimension
Voltage transducer AC 10V to 500V wiring diagram:
AC voltage transducer 10V to 500V power supply AC/DC 120V/240V wiring

Details

Voltage Sensor Details

Tips: How to calculate the external resistance value of the voltage sensor?

When the magnetic balance voltage sensor is applied, the measured voltage is converted into the rated input current for measurement, and an external resistance needs to be added. The calculation is as follows:

Example: Use a voltage sensor to measure 220V voltage.
Because: The rated input current of the voltage sensor Ii=10mA, the internal resistance of the primary side Ri=430Ω. Now to measure the voltage Ui=220V, the external resistance R needs to be calculated.
Solution: R=V/Ii-Ri=220V/10mA-430Ω=21.57kΩ
Considering the standardization of the resistance, choose the external resistance R=22kΩ.

From this point of view, when measuring voltages above 100 volts, the simple calculation method in engineering is R=Ui/Ii. However, if the accuracy error of the entire measurement system is considered, it should be calculated strictly according to the above method. The user does some simple calculations according to the usage, so that the voltage transducers are in the best working state.

Product reviews
Price is worth it.
5
June
Avatar
7/14/2021 3:10 AM
Perfect product! I bought a 0-50V AC voltage sensor. The quality and use experience are very perfect. Its anti-interference ability is very useful for my car project. I will order again because ATO is a good seller.
Was this review helpful? Yes No (0/0)
Voltage transducer works as described
5
anna
Avatar
10/26/2022 2:55 AM
Works like it should, I can apply it for my work industrial distance measurement. So happy to see its accurate automatic detection. Its strong anti-interference capability can reach our expectation. Work great and easy to install.
Was this review helpful? Yes No (0/0)
DC Sensor
5
Vilkesh
Avatar
6/1/2026 9:32 PM
Is this a DC sensor? The SKU is listed as ATO-VOS-AC500 AC sensor. I need a DC sensor, not an AC sensor.
Was this review helpful? Yes No (0/0)
ATO Responded
This voltage sensor is AC/DC compatible; the device operates on a DC 12V/24V power supply.
Only registered users can write reviews
Customers who bought this item also bought

Hall Effect Current Sensor 50A/100A/300A/800A/1200A to 1500A

ATO-CUS-ACDC1500
$93.23
Hall effect current sensors are AC/DC universal current sensors, with split-core structure, 5us fast response time, 1.0%FS accuracy, 0-5V/ 0-±5VDC output signal, ±15V power supply, fixed installation. Open loop current sensors are widely used for AC and DC current monitoring, system signal acquisition and feedback control.

Isolated DC Voltage Sensor 10mV to 1000V, Power Supply DC 12V/24V

ATO-VOS-DC1000
$141.96
DC voltage sensor uses modulation and demodulation technology to achieve input/output/power supply isolation. Isolated voltage transducer has measuring range from DC 10mV/50mV/75mV/5V/150V/300V/500V to 1000V, supply voltage DC 12V/24V, accuracy 0.2%FS, output signal 0-5V/0-10V/0-20mA/4-20mA and strong anti-interference capability. DC voltage sensor is widely used for voltage isolated measuring and control, such as electric power, remote monitoring, medical equipment, etc.

3 Phase AC Voltage Transducer 10V to 500V, Output 0-5V/4-20mA/0-20mA

ATO-VOS-3AC500
$177.78
3 phase AC voltage transducer is a special voltage sensor for three-phase AC voltage measurement. Voltage transducer has a measuring range from AC 10V to 500V, supply voltage DC 12V/24V, output signal DC 0-5V/0-20mA/4-20mA. 3 phase voltage transducer is mainly used for power monitoring, power control and dispatching systems in petroleum, coal, metallurgy, railway and other industries.