AC current sensor has measuring range of 1A/2A/5A/10A/20A/30A/50A to 150A.
Specification:
| Model | ATO-CURTS-DJIB |
| Shipping weight | 0.5kg |
| Measuring range of input current * | AC 0-150A |
| Output signal * | DC 4-20mA, DC 0-20mA, DC 1-5V, DC 0-5V, DC 0-10V (customizable) |
| Power supply * | DC 24V, DC 12V, AC 220V, AC 110V (customizable) |
| Accuracy | 0.5%F.S. |
| Isolation voltage | 3kV/50Hz/1min |
| Offset voltage | ≤10mV |
| Temperature drift | ≤100PPM/℃ |
| Frequency bandwidth | 20~50Hz |
| Current consumption | <5mA |
| Load capacity | Voltage output: 6V, current output: 5mA |
| Response time | <250ms |
| Overload capacity | 30 times nominal input |
| Work temperature | -10~+70℃ |
| Storage temperature | -25~+85℃ |
| Measuring method | Through-hole |
| Hole diameter * | 4mm, 8mm, 12mm, 15mm |
| Installation | DIN rail and screw fixation |
Dimension and wiring diagram:
Details

Tips: How to improve the performance of ac current sensor?
1. Method of improving accuracy
- Primary side wire of ac current sensor shall be placed in the center of the sensor hole, don't place it deflected.
- Diameter of the primary side wire shall fill the hole of the sensor, don't leave a big gap.
- The quantity of electricity to be measured should be close to the standard measurement rating Ii of ac current sensor. If conditions are limited, please measure the low level of electricity with a high measuring range sensor. To improve the measuring accuracy, the primary side wire can be wound by several circles of N through the primary side hole, so as to ensure that ampere-turns Ni is close to the rated current Ii.
In addition to the above methods, attentions shall also be paid to installation wiring, work environment and instant calibration.
2. Obtain good dynamic characteristics and sensitivity
In order to obtain good dynamic characteristics, namely the quick reaction time and tracking velocity, the primary side wire shall insert the primary side hole solely. And the wire shall be full of hole.
3. The temperature of primary side current line or flat cable shall not exceed 80℃.
Product reviews
Measuring motor current
Russell
7/27/2018 3:31 AM
I used this current sensor for measuring motor current. Motor specifications: AC 380V, three-phase, 7.5kW. I selected current sensor 0-50A measuring range. The effect is relatively good. The error is relatively small, even for small current.
Was this review helpful? (0/0)
Current sensor type customized
blanche
2/5/2023 7:30 PM
- Measurement range: AC 0-1A
- Output signal: DC0-10V
- Power Supply for 0-10V : 220V AC
- Hole Diameter Selection : 15mm
I had purchased a current sensor with the above specifications.
Due to the characteristics of the current sensor installation site, it is difficult to release the wiring.
Is it possible to custom-made the core of the sensor as a detachable type (open type)?
I would like to know if it is possible to manufacture with the above specifications with the above-mentioned model or open type."
- Output signal: DC0-10V
- Power Supply for 0-10V : 220V AC
- Hole Diameter Selection : 15mm
I had purchased a current sensor with the above specifications.
Due to the characteristics of the current sensor installation site, it is difficult to release the wiring.
Is it possible to custom-made the core of the sensor as a detachable type (open type)?
I would like to know if it is possible to manufacture with the above specifications with the above-mentioned model or open type."
Was this review helpful? (0/0)
Instantaneous measurements
Tekes
9/23/2026 3:25 AM
We intend to purchase 4 ATO-VOS-AC1000 and 4 ATO-CUS-AC150 sensors. These sensors perfectly meet our needs. However, we are unsure whether these sensors are RMS (Real-Sum Metrics) or instantaneous sensors. We need instantaneous measurements for motor control.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
AC/DC Voltage Sensor 75mV to 500V, RMS 0-5V/0-10V/4-20mA/0-20mA Output
ATO-VOS-ACDC500
$161.27
Voltage sensor has voltage measuring range from AC/DC 75mV/50V/100V/250V/300V to 500V, supply voltage DC 12V/24V, output DC voltage/current or True RMS voltage/current signal 0-5V/0-10V/0-20mA/4-20mA and protection class IP20. AC/DC voltage sensor has two installation methods, DIN rail installation and M3 screw fixation.
Current Sensor AC/DC 0~1mA/10mA/50mA/0.5A/1A/5A
ATO-CUS-ACDC5
$126.37
Current sensors are AC/DC universal current sensors, with a low current measuring range from milliamp current 1mA to 5A. AC/DC current sensors adopt linear photoelectric isolation or modulation and demodulation principle, fast response, 0.5%FS high accuracy, good stability, small size, light weight, input current terminal connection, DIN rail installation. Isolated current sensors are widely used for AC sine wave current or DC bidirectional current measurement.
DC Current Sensor 1mA/1A/5A/10A/100A to 800A
ATO-CUS-DC800
$85.56
DC current sensor has best cost performance, fast response, high accuracy, good stability, small size, light weight, DIN rail installation, widely used for DC current measurement of various occasions.
AC Voltage Sensor, Range 10V to 1000V, Power Supply DC 12V/24V/36V
ATO-VOS-AC1000
$174.92
AC voltage sensors have voltage measuring range from 10V/50V/100V/200V/500V/800V to 1000V, supply voltage DC 9V~36V, work temperature -25~+70℃, frequency range 25Hz ~ 3kHz and good EMC design. Voltage sensors have two installation methods, DIN rail installation and M3 screw fixation.
AC Current Sensor, 5mA/100mA/1A/2A/5A to 10A
ATO-CUS-AC10
$72.63
AC current sensor adopts linear photoelectric isolation or modulation and demodulation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, input current terminal connection, DIN rail installation, widely used for AC current measurement of various occasions.