Hall Effect Current Sensor 50A/100A/200A/500A/800A/1000A

$77.75
Hall effect current sensors are AC/DC universal current sensors, through-hole design, 1.0%FS accuracy, 0-4V/0-5V output signal, ±15V power supply, 5us fast response time, fixed installation. Open loop current sensors are widely used for AC/DC current measurement of VFD/DC motor drive/servo control system.
SKU: ATO-CUS-ACDC2000
*
*
Free Shipping
Delivery date: 8-12 days

Hall effect current sensor has measuring range of AC/DC 50A/100A/200A/300A/400A/500A/600A/800A/1000A/1200A to 1500A.

Specification:

ModelATO-AHKC-EATO-AHKC-LTATO-AHKC-EAATO-AHKC-EB
Shipping weight1kg
Hole diameter *20mm32.5mm40mm60mm
Measuring range of input current *AC/DC 0-50A ~ 0-500AAC/DC 0-100A ~ 0-800AAC/DC 0-200A ~ 0-1500AAC/DC 0-200A ~ 0-1500A
Output signal *0-4VDC, 0-5VDC
Zero offset voltage±20mV
Offset voltage drift≤±1.0mV/℃
Linearity≤0.2%FS
Power supply±15VDC
Accuracy1.0%F.S.
Bandwidth0~20kHz
Response time≤5us
Withstand voltageAC 2500V (between input, output and power supply)
Work temperature-25~+70℃
Storage temperature-40~+85℃
Humidity≤95%RH (no dew formation, no corrosive gas)
Elevation≤3500m
Measuring methodThrough-hole type
InstallationScrew fixation

50A to 1500A AC/DC current sensor dimensional diagram:
Hall effect current sensor 50A/100A/500A/1000A to 2000A dimension

ModelDimension (mm)
WHDΦ (Hole diameter)
M (Mounting)N (Mounting)
ATO-AHKC-E5372162047-
ATO-AHKC-LT9073.52532.574.571
ATO-AHKC-EA100108304078-
ATO-AHKC-EB120112306098-

50A to 1500A AC/DC current sensor wiring diagram:
Hall effect current sensor 50A/100A/500A/1000A to 2000A wiring diagram

Details

50A to1000A Hall Effect Current Sensor Details

Tips: Selection of current sensors in communication base station
The current sensor can realize the real-time management of the mobile communication base station through the centralized monitoring of the communication power supply. The management personnel can manage the working state of each communication base station in the remote centralized control center, and the technician can also carry on the system maintenance to the base in the first time. In the specific design of a new base, or the need to retrofit the existing base, it should pay attention to the following points when selecting current sensor:

  1. First of all, it need to check if the site equipment has been installed, the current sensor has split-core and closed-core type. Split-core current sensor has high accuracy 0.5%FS, while closed-core current sensor has accuracy 1.0%FS. It needs to choose the split-core type in the case of wire cannot be disconnected. It also needs to consider wheather the wire can be disconnected when replacing the current sensors.
  2. In addition, when selecting current sensors, it needs to pay attention to the environment temperature and moisture conditions and it needs to clarify the state of the environment to ATO sales.
  3. Finally, it is important to note that when choosing to the DC current sensor for monitoring in the battery group, it is necessary to pay attention to whether the reverse current needs to be monitored because there is a charge and discharge problem with the battery.
Product reviews
Hall effect current sensor output
5
Fernandoh
Avatar
5/26/2021 12:55 AM
For your ATO-CUS-ACDC20000 current sensor, it says the sensor output is 0-5VDC. Wish to confirm that, output is bi-directional?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the output is bi-directional, it is 0 ~±5V. Output is 0 to +5VDC in one direction of current flow and 0 to -5VDC in opposite direction of current flow.
Looking for a Hall effect sensor
5
Goha
Avatar
11/23/2025 7:46 PM
We are looking for a Hall effect sensor that meets the following specifications: - Bidirectional - Supply voltage: 24V - Output signal: Current output (4:20mA) or voltage output (0-±5VDC) - Accuracy: as low as 1% - Rated current: 500A DC. Could you recommend a suitable model?
Was this review helpful? Yes No (0/0)
ATO Responded
We need to know the aperture size of the Hall effect sensor you require. Bidirectional current sensors are only available with a supply voltage of ±12V or ±15V, not 24V, and the output signal is ±5V.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Hall effect current sensor has measuring range of AC/DC 50A/100A/200A/300A/400A/500A/600A/800A/1000A/1200A to 1500A.

Specification:

ModelATO-AHKC-EATO-AHKC-LTATO-AHKC-EAATO-AHKC-EB
Shipping weight1kg
Hole diameter *20mm32.5mm40mm60mm
Measuring range of input current *AC/DC 0-50A ~ 0-500AAC/DC 0-100A ~ 0-800AAC/DC 0-200A ~ 0-1500AAC/DC 0-200A ~ 0-1500A
Output signal *0-4VDC, 0-5VDC
Zero offset voltage±20mV
Offset voltage drift≤±1.0mV/℃
Linearity≤0.2%FS
Power supply±15VDC
Accuracy1.0%F.S.
Bandwidth0~20kHz
Response time≤5us
Withstand voltageAC 2500V (between input, output and power supply)
Work temperature-25~+70℃
Storage temperature-40~+85℃
Humidity≤95%RH (no dew formation, no corrosive gas)
Elevation≤3500m
Measuring methodThrough-hole type
InstallationScrew fixation

50A to 1500A AC/DC current sensor dimensional diagram:
Hall effect current sensor 50A/100A/500A/1000A to 2000A dimension

ModelDimension (mm)
WHDΦ (Hole diameter)
M (Mounting)N (Mounting)
ATO-AHKC-E5372162047-
ATO-AHKC-LT9073.52532.574.571
ATO-AHKC-EA100108304078-
ATO-AHKC-EB120112306098-

50A to 1500A AC/DC current sensor wiring diagram:
Hall effect current sensor 50A/100A/500A/1000A to 2000A wiring diagram

Details

50A to1000A Hall Effect Current Sensor Details

Tips: Selection of current sensors in communication base station
The current sensor can realize the real-time management of the mobile communication base station through the centralized monitoring of the communication power supply. The management personnel can manage the working state of each communication base station in the remote centralized control center, and the technician can also carry on the system maintenance to the base in the first time. In the specific design of a new base, or the need to retrofit the existing base, it should pay attention to the following points when selecting current sensor:

  1. First of all, it need to check if the site equipment has been installed, the current sensor has split-core and closed-core type. Split-core current sensor has high accuracy 0.5%FS, while closed-core current sensor has accuracy 1.0%FS. It needs to choose the split-core type in the case of wire cannot be disconnected. It also needs to consider wheather the wire can be disconnected when replacing the current sensors.
  2. In addition, when selecting current sensors, it needs to pay attention to the environment temperature and moisture conditions and it needs to clarify the state of the environment to ATO sales.
  3. Finally, it is important to note that when choosing to the DC current sensor for monitoring in the battery group, it is necessary to pay attention to whether the reverse current needs to be monitored because there is a charge and discharge problem with the battery.
Product reviews
Hall effect current sensor output
5
Fernandoh
Avatar
5/26/2021 12:55 AM
For your ATO-CUS-ACDC20000 current sensor, it says the sensor output is 0-5VDC. Wish to confirm that, output is bi-directional?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the output is bi-directional, it is 0 ~±5V. Output is 0 to +5VDC in one direction of current flow and 0 to -5VDC in opposite direction of current flow.
Looking for a Hall effect sensor
5
Goha
Avatar
11/23/2025 7:46 PM
We are looking for a Hall effect sensor that meets the following specifications: - Bidirectional - Supply voltage: 24V - Output signal: Current output (4:20mA) or voltage output (0-±5VDC) - Accuracy: as low as 1% - Rated current: 500A DC. Could you recommend a suitable model?
Was this review helpful? Yes No (0/0)
ATO Responded
We need to know the aperture size of the Hall effect sensor you require. Bidirectional current sensors are only available with a supply voltage of ±12V or ±15V, not 24V, and the output signal is ±5V.
Only registered users can write reviews
Customers who bought this item also bought

DC Current Sensor 1mA/1A/5A/10A/100A to 800A

ATO-CUS-DC800
$85.56
DC current sensor has best cost performance, fast response, high accuracy, good stability, small size, light weight, DIN rail installation, widely used for DC current measurement of various occasions.

AC/DC Voltage Sensor 75mV to 500V, RMS 0-5V/0-10V/4-20mA/0-20mA Output

ATO-VOS-ACDC500
$161.27
Voltage sensor has voltage measuring range from AC/DC 75mV/50V/100V/250V/300V to 500V, supply voltage DC 12V/24V, output DC voltage/current or True RMS voltage/current signal 0-5V/0-10V/0-20mA/4-20mA and protection class IP20. AC/DC voltage sensor has two installation methods, DIN rail installation and M3 screw fixation.