M12 Proximity Sensor, Inductive, NPN NO, Unshielded, 4mm

$38.79
Low cost M12 proximity sensor manufacturer direct sale. It is an NPN inductive proximity switch with a NO output method, an unshielded installation type, and a 4mm detection range, which can detect the presence or absence of metallic objects within a specified range without direct contact. The inductive proximity sensor is designed to detect magnetic metals, with a reduced sensing distance for non-magnetic metals.
SKU: ATO-PROS-M12
Availability: In stock
Free Shipping
Delivery date: 6-12 days

Buy M12 inductive proximity sensor (2pcs) from manufacturer. This 4mm proximity switch can detect a variety of metals. NPN proximity sensor, wholesale price, NO output method, small size, long life, strong anti-interference abilities, unshielded type installation and supply voltage DC 12V-24V.

Functions

  • Red LED checks the state of the proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specifications

ModelATO-PSI-12A2ZN
Installation typeUnshielded
DC typeNO
Detection range4mm±10%
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 15*15*1mm
Response frequencyDC: 1kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V)
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew)
Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range: -30~65℃, at +23℃, ±15% detection distance
Temperature range: -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Wiring Diagram

M12 proximity sensor wiring

Line Definition

M12 proximity sensor wiring definition

Dimension (Unit: mm)

M12 proximity sensor dimension

Details

M12 proximity sensor details

Tips: What is an unshielded proximity sensor?

ATO unshielded proximity sensor, also known as a non-shielded or unshielded inductive sensor, is a type of inductive sensor used to detect the presence or absence of metallic objects within a certain range without direct contact.

Unlike shielded proximity sensors, which have a metal housing that focuses the electromagnetic field to the front of the sensor, unshielded sensors emit an electromagnetic field in a wider, more dispersed pattern around the sensing face.

The broader detection area of unshielded proximity sensors makes them suitable for applications where a larger sensing range is required, or where the exact positioning of the object is less critical. They are typically used in environments where there is a need to detect objects from multiple directions or where installation space allows for a less focused sensing approach.

Unshielded proximity sensors are widely used in industrial automation for tasks such as counting parts on a conveyor belt, detecting the position of machinery components, or ensuring the presence of metal objects in assembly processes. Their main advantage lies in their ability to detect objects in a broader area, though this can also make them more susceptible to interference from surrounding metal objects and require careful placement to avoid false detections.

In this video, ATO will show you the  differences between inductive and magnetic types.

Product reviews
Solid and cost-effective sensor
5
Arlen
Avatar
2/4/2026 11:16 PM
I’ve been using this M12 inductive proximity sensor for several weeks in a small automation setup, and it works exactly as expected. The NPN NO output is easy to wire, and the 4 mm sensing distance is accurate and consistent for steel parts. Installation was straightforward with the unshielded design, and detection is reliable without any physical contact.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Buy M12 inductive proximity sensor (2pcs) from manufacturer. This 4mm proximity switch can detect a variety of metals. NPN proximity sensor, wholesale price, NO output method, small size, long life, strong anti-interference abilities, unshielded type installation and supply voltage DC 12V-24V.

Functions

  • Red LED checks the state of the proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC
  • Can replace small switches and limit switches

Specifications

ModelATO-PSI-12A2ZN
Installation typeUnshielded
DC typeNO
Detection range4mm±10%
Delay distance≤10% detection range
Detection objectMagnetic metal (the detection distance decreases when it is non-magnetic metal)
Standard detection objectIron 15*15*1mm
Response frequencyDC: 1kHz, AC: 50Hz
Supply voltageDC type: DC 12-24V (6-36V)
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew)
Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range: -30~65℃, at +23℃, ±15% detection distance
Temperature range: -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Wiring Diagram

M12 proximity sensor wiring

Line Definition

M12 proximity sensor wiring definition

Dimension (Unit: mm)

M12 proximity sensor dimension

Details

M12 proximity sensor details

Tips: What is an unshielded proximity sensor?

ATO unshielded proximity sensor, also known as a non-shielded or unshielded inductive sensor, is a type of inductive sensor used to detect the presence or absence of metallic objects within a certain range without direct contact.

Unlike shielded proximity sensors, which have a metal housing that focuses the electromagnetic field to the front of the sensor, unshielded sensors emit an electromagnetic field in a wider, more dispersed pattern around the sensing face.

The broader detection area of unshielded proximity sensors makes them suitable for applications where a larger sensing range is required, or where the exact positioning of the object is less critical. They are typically used in environments where there is a need to detect objects from multiple directions or where installation space allows for a less focused sensing approach.

Unshielded proximity sensors are widely used in industrial automation for tasks such as counting parts on a conveyor belt, detecting the position of machinery components, or ensuring the presence of metal objects in assembly processes. Their main advantage lies in their ability to detect objects in a broader area, though this can also make them more susceptible to interference from surrounding metal objects and require careful placement to avoid false detections.

Product reviews
Solid and cost-effective sensor
5
Arlen
Avatar
2/4/2026 11:16 PM
I’ve been using this M12 inductive proximity sensor for several weeks in a small automation setup, and it works exactly as expected. The NPN NO output is easy to wire, and the 4 mm sensing distance is accurate and consistent for steel parts. Installation was straightforward with the unshielded design, and detection is reliable without any physical contact.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

M18 Photoelectric Switch Sensor, Through Beam, DC 12V-24V, NPN, NO

ATO-PHOS-TBM18
$41.36
Round type through beam photoelectric sensor is used to detect the presence or absence of an object by transmitting a light beam from one side of the detection area to a receiver on the opposite side. Infrared photo electric switch can distinguish opaque reflective objects, with 5m detection distance and DC 12-24V power supply, less susceptible to interference.