25 hp (18.5 kW) VFD, 3 Phase 240V, 420V, 480V

$992.18
Favorable price 25 hp (18.5 kW) VFD, three phase 240V, 420V, 480V variable frequency drive, IP20, RS485 enabled, brand new direct sale by Chinese manufacturer with wholesale price.
SKU: GK3000-4T0185G
Free Shipping
Delivery date: 6-12 days

25 hp (18.5 kW) high performance variable frequency drive, three phase 240V, 420V, 480V for selection, IP20 enclosure.

Specification:

BasicsModelGK3000-4T0185G/ GK3000-2T0185G
Capacity25 hp (18.5 kW)
Shipping weight8 kg
Dimension330*200*200 mm for GK3000-4T0185G/ 530*320*235 for GK3000-2T0185G
I/O FeatureRated current37A at 380V ~ 480V, 75A at 220V ~ 240V
Input voltage3 phase 240V /420V /480V AC ±15% (Optional)
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Variable frequency drive undervoltage
The undervoltage is a problem that we often encounter in using VFD. It is mainly because of the main circuit voltage is too low (220V series below 200V, 380V series below 400V). The main reason: One circuit of rectifier bridge damage or one circuit of SCR does not work correctly, all these can lead to undervoltage. Moreover, the main circuit contactor damage resulting DC bus has voltage loss in the charge resistance may lead to undervoltage. And the voltage detection circuit failure may also cause undervoltage problem.
For example, a 25hp VFD displays "Uu" after power on. Check the rectifier bridge charge resistance and find no problem, but haven't heard a sound of the contact action after power on. Because this VFD charging circuit doesn't use SCR but depend on the contactor attracting to complete the charging process, so that the failure may be caused by the contactor, control circuit or power supply. Remove the contactor, and individually connect 24V DC, the contactor is working properly. And then check the 24V DC power supply and find the voltage regulator tube is damaged. After replacing it, VFD is working properly.

How to Measure Circuits with a Digital Multimeter?

This video will show you how to measure electrical circuit using a digital multimeter.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

4-20mA speed Control on VFD

4-20mA is as common in analog control systems as 0~10V, and ATO GK3000 series VFDs are also perfectly compatible.

Product reviews
What type of VFD does the motor need?
5
Sardra
Avatar
8/6/2021 12:23 AM
What type of vfd do I need for a 220 to 3 ph 5 hp motor?
Was this review helpful? Yes No (0/0)
ATO Responded
What is your motor rated current? And what is your supply voltage? Is it 1-phase or 3-phase?
I have some questions
5
Grinas
Avatar
2/24/2025 1:15 AM
Does the position of the jumpers CI=I or V and / or A0=I or V have any importance?
Was this review helpful? Yes No (0/0)
ATO Responded
If your sensor is an analog current signal, then jumper JP3 needs to be connected to the I side, and the sensor signal line connects to the 24v and CI terminals.
If it is an analog voltage signal, jumper JP3 is connected to the V side, and the sensor signal line connects to the 24v and VI terminals.
Please refer to the video wiring part: https://www.youtube.com/watch?v=OKR4tX4x0qQ
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

25 hp (18.5 kW) high performance variable frequency drive, three phase 240V, 420V, 480V for selection, IP20 enclosure.

Specification:

BasicsModelGK3000-4T0185G/ GK3000-2T0185G
Capacity25 hp (18.5 kW)
Shipping weight8 kg
Dimension330*200*200 mm for GK3000-4T0185G/ 530*320*235 for GK3000-2T0185G
I/O FeatureRated current37A at 380V ~ 480V, 75A at 220V ~ 240V
Input voltage3 phase 240V /420V /480V AC ±15% (Optional)
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Variable frequency drive undervoltage
The undervoltage is a problem that we often encounter in using VFD. It is mainly because of the main circuit voltage is too low (220V series below 200V, 380V series below 400V). The main reason: One circuit of rectifier bridge damage or one circuit of SCR does not work correctly, all these can lead to undervoltage. Moreover, the main circuit contactor damage resulting DC bus has voltage loss in the charge resistance may lead to undervoltage. And the voltage detection circuit failure may also cause undervoltage problem.
For example, a 25hp VFD displays "Uu" after power on. Check the rectifier bridge charge resistance and find no problem, but haven't heard a sound of the contact action after power on. Because this VFD charging circuit doesn't use SCR but depend on the contactor attracting to complete the charging process, so that the failure may be caused by the contactor, control circuit or power supply. Remove the contactor, and individually connect 24V DC, the contactor is working properly. And then check the 24V DC power supply and find the voltage regulator tube is damaged. After replacing it, VFD is working properly.

Product reviews
What type of VFD does the motor need?
5
Sardra
Avatar
8/6/2021 12:23 AM
What type of vfd do I need for a 220 to 3 ph 5 hp motor?
Was this review helpful? Yes No (0/0)
ATO Responded
What is your motor rated current? And what is your supply voltage? Is it 1-phase or 3-phase?
I have some questions
5
Grinas
Avatar
2/24/2025 1:15 AM
Does the position of the jumpers CI=I or V and / or A0=I or V have any importance?
Was this review helpful? Yes No (0/0)
ATO Responded
If your sensor is an analog current signal, then jumper JP3 needs to be connected to the I side, and the sensor signal line connects to the 24v and CI terminals.
If it is an analog voltage signal, jumper JP3 is connected to the V side, and the sensor signal line connects to the 24v and VI terminals.
Please refer to the video wiring part: https://www.youtube.com/watch?v=OKR4tX4x0qQ
Only registered users can write reviews
Customers who bought this item also bought

15 hp (11 kW) VFD, 3 Phase 230V, 415V, 480V

GK3000-4T0110G
$634.44
Inexpensive 15 hp (11 kW) VFD, three phase 230V/415V/480V, high performance variable frequency drive, IP20 enclosure, RS485 enabled, brand new direct sale by manufacturer in China.

30 hp (22 kW) VFD, 3 Phase 208V, 440V, 460V

GK3000-4T0220G
$1,264.30
Cheap price 30 hp (22 kW) VFD, three phase 208V, 440V, 460V high performance variable frequency drive, IP20, RS485 enabled, brand new direct sale by manufacturer.

40 hp (30 kW) VFD, 3 Phase 230V, 420V, 480V

GK3000-4T0300G
$1,497.31
High quality 40 hp (30 kW) VFD with low cost, three phase 230V, 420V, 480V variable frequency drive with good performance, brand new direct sale by manufacturer.

7.5 hp (5.5 kW) VFD, 3 Phase 208V, 380V, 480V

GK3000-4T0055G
$415.08
7.5 hp (5.5 kW) VFD with wholesale price, 3 phase 208V/380V/480V 50Hz/60Hz for option, heavy duty variable frequency drive, 13 amps at 380V ~480V, strong overload capacity, manufacturer direct sale.

100 hp (75 kW) VFD, 3 Phase 230V, 400V, 460V

GK3000-4T0750G
$3,197.41
100 hp (75 kW) VFD in low price, three phase 230V, 400V, 460V variable frequency drive for energy savings, strong over-current capacity, brand new direct sale by Chinese manufacturer.