15 hp (11 kW) VFD, 3 Phase 230V, 415V, 480V

$634.44
Inexpensive 15 hp (11 kW) VFD, three phase 230V/415V/480V, high performance variable frequency drive, IP20 enclosure, RS485 enabled, brand new direct sale by manufacturer in China.
SKU: GK3000-4T0110G
Free Shipping
Delivery date: 6-12 days

15 hp (11 kW) variable frequency drive with good performance, three phase 230V, 415V, 480V for selection,manufacturer direct sale.

Specification:

BasicsModelGK3000-4T0110G/ GK3000-2T0110G
Capacity15 hp (11 kW)
Shipping weight8 kg
Dimension330*200*200 mm for GK3000-4T0110G/ 330*200*200 for GK3000-2T0110G
I/O FeatureRated current25A at 380V ~ 480V, 45A at 220V ~ 240V
Input voltage3 phase 230V /415V /480V AC ±15% (Optional)
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the debate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Variable Frequency Drive Output unbalanced
VFD output unbalanced is generally expressed as motor dithering and speed instability. The main reason is the damages of the module, drive circuit, reactor, etc.
For example, a 15hp VFD with output voltage difference of about 100V.
Analysis and maintenance: Open the VFD, check the inverter module online and find there is no problem. Measure the six-way drive circuit and find no fault. And then remove the module, and find in bridge upper of one way, a high-power transistor cannot normally turn on and off. The module is broken. And confirmer drive circuit has no fault. Finally replace the transistor, and then the VFD is normal.

How to Measure Circuits with a Digital Multimeter?

This video will show you how to measure electrical circuit using a digital multimeter.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

4-20mA speed Control on VFD

4-20mA is as common in analog control systems as 0~10V, and ATO GK3000 series VFDs are also perfectly compatible.

Product reviews
15hp VFD
5
Robin
Avatar
11/22/2018 7:30 PM
It is nice to do business with ATO. This is a cost-effective and reliable three phase 480V VFD.
Was this review helpful? Yes No (0/0)
Can a three-phase VFD run a CNC spindle motor?
5
Maureen
Avatar
11/10/2021 7:09 PM
My supply voltage is 3-phase, 480V, can I use your 3-phase drive, and adjust its output to 380V, 400Hz to run my CNC spindle motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course.
How to manage 15hp VFD
5
simonson
Avatar
2/5/2023 11:34 PM
I purchased a 15HP single to three phase GK3000 and would like to have it go into "fwd" and "stop" , controlled by a Rain Bird irrigation controller.
How can I use the irrigation controller to manage the GK3000?
Was this review helpful? Yes No (0/0)
ATO Responded
Please refer to our video to set it up: https://www.youtube.com/watch?v=zxTVneMG5Jo&list=PLlo8RulDRnthBFbP4ydheukDSKw2hAfDn&index=27
Storage temperature
4
Neilno
Avatar
4/16/2025 7:58 PM
I would like to know if the VFD can be stored from -60℃ to -10℃ without the device operating?
Was this review helpful? Yes No (0/0)
ATO Responded
The electronics inside our VFD can only be used at temperatures of about -20℃. Any lower temperature may damage the internal electronics (even when not operating).
Synchronous Motor 3-phase 96V
5
Faisal
Avatar
8/18/2025 2:51 PM
Hi will this work with a Synchronous Motor 96V 3-phase with Sine/cosine speed sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, not sure if it will work with your motor, it is rarely used in this voltage range.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

15 hp (11 kW) variable frequency drive with good performance, three phase 230V, 415V, 480V for selection,manufacturer direct sale.

Specification:

BasicsModelGK3000-4T0110G/ GK3000-2T0110G
Capacity15 hp (11 kW)
Shipping weight8 kg
Dimension330*200*200 mm for GK3000-4T0110G/ 330*200*200 for GK3000-2T0110G
I/O FeatureRated current25A at 380V ~ 480V, 45A at 220V ~ 240V
Input voltage3 phase 230V /415V /480V AC ±15% (Optional)
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the debate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Variable Frequency Drive Output unbalanced
VFD output unbalanced is generally expressed as motor dithering and speed instability. The main reason is the damages of the module, drive circuit, reactor, etc.
For example, a 15hp VFD with output voltage difference of about 100V.
Analysis and maintenance: Open the VFD, check the inverter module online and find there is no problem. Measure the six-way drive circuit and find no fault. And then remove the module, and find in bridge upper of one way, a high-power transistor cannot normally turn on and off. The module is broken. And confirmer drive circuit has no fault. Finally replace the transistor, and then the VFD is normal.

Product reviews
15hp VFD
5
Robin
Avatar
11/22/2018 7:30 PM
It is nice to do business with ATO. This is a cost-effective and reliable three phase 480V VFD.
Was this review helpful? Yes No (0/0)
Can a three-phase VFD run a CNC spindle motor?
5
Maureen
Avatar
11/10/2021 7:09 PM
My supply voltage is 3-phase, 480V, can I use your 3-phase drive, and adjust its output to 380V, 400Hz to run my CNC spindle motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course.
How to manage 15hp VFD
5
simonson
Avatar
2/5/2023 11:34 PM
I purchased a 15HP single to three phase GK3000 and would like to have it go into "fwd" and "stop" , controlled by a Rain Bird irrigation controller.
How can I use the irrigation controller to manage the GK3000?
Was this review helpful? Yes No (0/0)
ATO Responded
Please refer to our video to set it up: https://www.youtube.com/watch?v=zxTVneMG5Jo&list=PLlo8RulDRnthBFbP4ydheukDSKw2hAfDn&index=27
Storage temperature
4
Neilno
Avatar
4/16/2025 7:58 PM
I would like to know if the VFD can be stored from -60℃ to -10℃ without the device operating?
Was this review helpful? Yes No (0/0)
ATO Responded
The electronics inside our VFD can only be used at temperatures of about -20℃. Any lower temperature may damage the internal electronics (even when not operating).
Synchronous Motor 3-phase 96V
5
Faisal
Avatar
8/18/2025 2:51 PM
Hi will this work with a Synchronous Motor 96V 3-phase with Sine/cosine speed sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, not sure if it will work with your motor, it is rarely used in this voltage range.
Only registered users can write reviews
Customers who bought this item also bought

25 hp (18.5 kW) VFD, 3 Phase 240V, 420V, 480V

GK3000-4T0185G
$992.18
Favorable price 25 hp (18.5 kW) VFD, three phase 240V, 420V, 480V variable frequency drive, IP20, RS485 enabled, brand new direct sale by Chinese manufacturer with wholesale price.

20 hp (15kW) VFD, 3 Phase 220V, 380V, 460V

GK3000-4T0150G
$697.14
Cheap price 20 hp (15 kW) VFD, three phase 220V, 380V, 460V variable frequency drive with good performance, IP20 enclosure, RS485 enabled, brand new direct sale by manufacturer.

30A 277V/ 480V Locking Plug, 4 Pole 5 Wire

ATO-L22-30
$81.27
30A electrical locking plug with 4 pole and 5 wire, 277V and480V rated voltage. It is made of high quality nylon and full copper. The dielectric voltage withstand is 18000V minimum. Male plug and female plug for your choices.

10 hp (7.5 kW) VFD, Three Phase 220V, 440V, 480V

GK3000-4T0075G
$463.25
Affordable 10 hp (7.5 kW) VFD, three phase 220V/440V/480V input for option, three phase output variable frequency drive, 17 amps, V/F & vector control, manufacturer direct sale.

1 hp (0.75 kW) VFD, 3 Phase 230V, 400V, 480V

GK3000-4T0007G
$206.49
Favorable price 1 hp (0.75 kW) VFD, three phase 230V/400V/480V 50Hz/60Hz for selection, sensorless vector variable frequency drive, RS485 enabled, strong overload capacity, manufacturer direct sale.