Tension and Compression Column Load Cell, 1kg/5kg/10kg/100kg to 2 ton

$131.29
Buy a tension and compression column load cell online with optional capacities ranging from 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg up to 2 tons. This miniature column-type load cell accurately measures both tensile and compressive forces, ideal for use in testing machines, industrial automation, process control, and weighing systems.
SKU: ATO-LC-101
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Tension and compression column load cell is a force sensor designed to measure both tensile and compressive loads accurately. Column load cells are widely used in industrial weighing systems, material testing machines, press force monitoring, and structural load measurement.

Specification

ModelATO-DYZ-101
Capacity (Optional)1kg/5kg/10kg/20kg/30kg/50kg/100kg/200kg/300kg/500kg/1 ton/2 ton
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Rated Output2.0±0.05mV/V
Zero Balance±2%F.S.
Non-Linearity0.05%F.S.
Hysteresis0.03%F.S.
Repeatability0.03%F.S.
Creep (30min)0.03%F.S.
Temp Effect on Output0.03%F.S./10℃
Temp Effect on Zero0.05%F.S./10℃
Response Frequency10kHz
MaterialStainless Steel
Impedance350Ω
Insulation≥5000MΩ/100VDC
Operating Voltage Range5~10V
Operating Temp Range-20~80℃
Safe Overload150%
Maximum Overload200%
Cable Specificationsφ3x2m
Cable Ultimate Pull10kg


Dimension (Unit: mm)

Tension and compression column load cell dimension

Wiring Method

Tension and compression column load cell wiring

*The above is the wiring method for measuring compression. If measuring tension, the wiring definitions of the green and white wires need to be reversed.

Tips: Difference between a Column Load Cell and a Shear Beam Load Cell

The primary differences between column load cells and shear beam load cells lie in their construction, capacity, and intended applications. Column load cells feature a cylindrical design, with force applied along their central axis. They offer high accuracy and are well-suited for high-capacity applications such as truck scales, tank weighing, and industrial presses, typically handling loads ranging from a few tons to several hundred tons. Their design offers excellent resistance to lateral forces and overloads.

In contrast, shear beam load cells are rectangular and are designed to measure strain caused by shear forces. They offer the highest accuracy for medium-capacity applications, such as platform scales, hopper weighing, and small tanks. Shear beam load cells are easier to install, more compact, and more cost-effective in lower load ranges.

Product reviews
Accurate and durable load cell
5
Mia
Avatar
2/2/2026 6:40 PM
This load cell performs reliably for both tension and compression tests. The output is accurate, and the solid construction handles safe overloads without any issues.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Tension and compression column load cell is a force sensor designed to measure both tensile and compressive loads accurately. Column load cells are widely used in industrial weighing systems, material testing machines, press force monitoring, and structural load measurement.

Specification

ModelATO-DYZ-101
Capacity (Optional)1kg/5kg/10kg/20kg/30kg/50kg/100kg/200kg/300kg/500kg/1 ton/2 ton
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Rated Output2.0±0.05mV/V
Zero Balance±2%F.S.
Non-Linearity0.05%F.S.
Hysteresis0.03%F.S.
Repeatability0.03%F.S.
Creep (30min)0.03%F.S.
Temp Effect on Output0.03%F.S./10℃
Temp Effect on Zero0.05%F.S./10℃
Response Frequency10kHz
MaterialStainless Steel
Impedance350Ω
Insulation≥5000MΩ/100VDC
Operating Voltage Range5~10V
Operating Temp Range-20~80℃
Safe Overload150%
Maximum Overload200%
Cable Specificationsφ3x2m
Cable Ultimate Pull10kg


Dimension (Unit: mm)

Tension and compression column load cell dimension

Wiring Method

Tension and compression column load cell wiring

*The above is the wiring method for measuring compression. If measuring tension, the wiring definitions of the green and white wires need to be reversed.

Tips: Difference between a Column Load Cell and a Shear Beam Load Cell

The primary differences between column load cells and shear beam load cells lie in their construction, capacity, and intended applications. Column load cells feature a cylindrical design, with force applied along their central axis. They offer high accuracy and are well-suited for high-capacity applications such as truck scales, tank weighing, and industrial presses, typically handling loads ranging from a few tons to several hundred tons. Their design offers excellent resistance to lateral forces and overloads.

In contrast, shear beam load cells are rectangular and are designed to measure strain caused by shear forces. They offer the highest accuracy for medium-capacity applications, such as platform scales, hopper weighing, and small tanks. Shear beam load cells are easier to install, more compact, and more cost-effective in lower load ranges.

Product reviews
Accurate and durable load cell
5
Mia
Avatar
2/2/2026 6:40 PM
This load cell performs reliably for both tension and compression tests. The output is accurate, and the solid construction handles safe overloads without any issues.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Tension and Compression Load Cell, 1 kg - 500 kg

ATO-LC-TC01
$137.98
Tension and compression load cell can bear both tension and pressure, with good anti-eccentric load performance, low height, all sealed structure and complete specifications. Miniature load cell with optional capacity 1 kg/ 100kg/ 200 kg/ 300kg/ 500 kg is suited to use in restricted spaces, such as using in vehicle/test instrument/laminator measurement and control.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

Miniature Tension and Compression Load Cell 3kg/20kg/100kg to 500kg

ATO-LC-TC02
$172.49
Miniature load cell can bear both tension and compression force, with metal-foil strain gauge, all stainless steel, small size, 1.0±0.2mV/V sensitivity. Miniature tension and compression load cell is used for force tester, riveting machine, laminator and welding machine.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.