Tension and Compression Load Cell, 100kg/1 ton/2 ton to 20 ton

$104.29
Tension and compression load cell can bear both tension and pressure, with good output symmetry, high eccentric load resistant, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, crane scales and other special weighing instruments.
SKU: ATO-LC-S05
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Tension and compression load cells have capacity range from 100kg, 500kg, 1000kg, 2 ton to 20 ton. Load cell capacity can be customized according to customer requirements.

Hermetically sealed to IP67, the robust construction perfectly safeguards the load cell from almost any damage emerging in harsh environments. The compact design plus the integral cable provide maximum convenience for installation even in restricted space.

Specification

ModelATO-LCS-TJL-4
Shipping Weight1~5kg
Capacity Range *100 kg~20 ton
Matched Display ControllerATO-TY5DA3 (Click it to the controller page)
Matched TransmitterATO-LCTR-NTB3K (Click it to the transmitter page)
Accuracy0.05%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.1mV/V
Creep±0.05%F.S/30min
Zero Output±1%F.S
Temperature Effect on Zero±0.05%F.S/10℃
Temperature Effect on Output±0.05%F.S/10℃
Operating Temperature-20℃~+65℃
Input Impedance380±10Ω
Output Impedance350±3Ω
Insulation Resistance≥5000MΩ
Safety Overload150%F.S
Bridge Voltage (excitation voltage)DC 10V
MaterialAlloy steel or stainless steel
Protection ClassIP66
Cable Length2m (<5ton), 5m (≥5ton)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Tension and compression load cell 100kg 2 ton to 20 ton feature

  • 42CrMo Alloy Steel: High hardness, strength, and durability, resistant to corrosion.
  • Corrosion Resistance: Performs well in humid environments.
  • High Accuracy: Precise measurements in extreme conditions.
  • Bidirectional Measurement: Suitable for tension and compression.
  • Easy Installation: Threaded holes for secure mounting.
  • IP66 Protection: Dust and water resistant.
  • Durable Construction: Long service life with elastic alloy steel.

Dimension

CapacityDimension (mm)
AHΦBΦMC
100~500kg88582844M16*1.526
700kg88583244M16*1.530
1~5 ton120685163M22*2.548
7~15 ton138946076M30*3.556
20 ton15610868.588M36*376

Tension and compression load cell 100kg to 20 ton dimension

Wiring Method

Load cell wiring method

Tips: How to detect load cell with a multimeter?
First of all, measure the resistance values of load cell input terminal and output terminal, compare with the resistance values marked on the product. If the measured values exceed the standard range, it means that the load cell has problems. At present, there are two resistance values of the common load cell: one is low resistance, in which, the input terminal is 400Ω±20Ω and the output terminal is 350Ω±5Ω; the other is high resistance, in which, the input terminal is 800Ω±20Ω and the output terminal is 700Ω±5Ω. Moreover, measure the output signal of the load cell. Choose the mV voltage option of digital multimeter, input DC 10V at load cell input terminal, and then measure the output voltage of the load cell. The voltage value = 10V * load cell sensitivity * force value / range value. If the measured value is big different from the computed value, it means that the sensor has been damaged.

In this video, we've presented two types of general-purpose micro load cells from ATO that can measure both compression and tensile forces. The capacitiy ranges are 1kg to 500kg, and 3kg to 500kg. Both are made of nickle-plated stainless steel, featuring corrosion-resistant and rugged construction. Incorporating metal foil strain gauging, these precision load cells will deliver excellent stability, reliability and accuracy under various industrial circumstances.

In this video, ATO offers a variety of load cells and weigh modules designed for your applications.

Product reviews
Load cell customized according to customer needs
5
Jeffery
Avatar
3/3/2021 1:03 AM
Can you customize the load cell according to our requirements?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can. You only need to tell me what specifications/sizes of tension and compression load cells need to be purchased.
I want to buy your load cell, do you have any suggestions?
5
Nomercy
Avatar
8/10/2021 3:56 AM
I am working on an research station i Norway and we have 12 loadcell (50 kg and 300 kg) which we want to connct to an computer, so that we can follow the weight over time. Is that possible, and what do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
We can recommend using our multi-channel junction box to connect the load cell together getting one output, and then connect the junction box output signal to the our Digital Load Cell Amplifier, to output RS485 signal, and then connect to the computer software through the 485 signal to monitor the weight information.
Does your load cell come with a cable matching the 5 pin male plug?
5
Conniew
Avatar
11/11/2021 6:53 PM
Does your load cell come with a cable matching the 5 pin male plug?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our load cell is supplied with a cable that matches the 5-pin male plug.
High sensitivity! Perfect load cell!
5
Alfredo
Avatar
4/28/2022 3:13 AM
I bought it for my workshop and installed last night. very nice accessory. After debugging and testing, it works very well, and the sensitivity is very high. Perfect tension and compression load cell! If I need more, I would buy it again.
Was this review helpful? Yes No (0/0)
I am interested in the ATO-LC-S05 rated for 3 Ton.
5
James
Avatar
3/2/2023 11:14 PM
I see that this is threaded for an M22 hole. Wondering if the cell can be modified to an M30 thread without damaging the cell.
Was this review helpful? Yes No (0/0)
ATO Responded
Customization is acceptable, and the length of the ATO-LC-S05 sensor with a capacity of 3 tons needs to be lengthened, and the MOQ must be more than 2 to be customized. We can quote only if you can accept it.
About thread pitch specification
4
Luxia
Avatar
12/10/2024 12:06 AM
I am wondering what the thread pitch specification is on these load cells that I just placed an order for. It says M30 but no pitch stated.
Was this review helpful? Yes No (0/0)
ATO Responded
The thread specification of the weighing sensor is M30*3.5.
Impact Load
5
Charlene
Avatar
7/24/2026 12:57 AM
Can this load cell withstand impact loads below its rated load (5000 kg, 0.05 s)?
Was this review helpful? Yes No (0/0)
ATO Responded
We typically recommend using 70%-80% of the sensor's full scale. If your application involves impact forces of 5 tons, we recommend purchasing a 7-ton or 10-ton capacity load cell.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Tension and compression load cells have capacity range from 100kg, 500kg, 1000kg, 2 ton to 20 ton. Load cell capacity can be customized according to customer requirements.

Hermetically sealed to IP67, the robust construction perfectly safeguards the load cell from almost any damage emerging in harsh environments. The compact design plus the integral cable provide maximum convenience for installation even in restricted space.

Specification

ModelATO-LCS-TJL-4
Shipping Weight1~5kg
Capacity Range *100 kg~20 ton
Matched Display ControllerATO-TY5DA3 (Click it to the controller page)
Matched TransmitterATO-LCTR-NTB3K (Click it to the transmitter page)
Accuracy0.05%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.1mV/V
Creep±0.05%F.S/30min
Zero Output±1%F.S
Temperature Effect on Zero±0.05%F.S/10℃
Temperature Effect on Output±0.05%F.S/10℃
Operating Temperature-20℃~+65℃
Input Impedance380±10Ω
Output Impedance350±3Ω
Insulation Resistance≥5000MΩ
Safety Overload150%F.S
Bridge Voltage (excitation voltage)DC 10V
MaterialAlloy steel or stainless steel
Protection ClassIP66
Cable Length2m (<5ton), 5m (≥5ton)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Tension and compression load cell 100kg 2 ton to 20 ton feature

  • 42CrMo Alloy Steel: High hardness, strength, and durability, resistant to corrosion.
  • Corrosion Resistance: Performs well in humid environments.
  • High Accuracy: Precise measurements in extreme conditions.
  • Bidirectional Measurement: Suitable for tension and compression.
  • Easy Installation: Threaded holes for secure mounting.
  • IP66 Protection: Dust and water resistant.
  • Durable Construction: Long service life with elastic alloy steel.

Dimension

CapacityDimension (mm)
AHΦBΦMC
100~500kg88582844M16*1.526
700kg88583244M16*1.530
1~5 ton120685163M22*2.548
7~15 ton138946076M30*3.556
20 ton15610868.588M36*376

Tension and compression load cell 100kg to 20 ton dimension

Wiring Method

Load cell wiring method

Tips: How to detect load cell with a multimeter?
First of all, measure the resistance values of load cell input terminal and output terminal, compare with the resistance values marked on the product. If the measured values exceed the standard range, it means that the load cell has problems. At present, there are two resistance values of the common load cell: one is low resistance, in which, the input terminal is 400Ω±20Ω and the output terminal is 350Ω±5Ω; the other is high resistance, in which, the input terminal is 800Ω±20Ω and the output terminal is 700Ω±5Ω. Moreover, measure the output signal of the load cell. Choose the mV voltage option of digital multimeter, input DC 10V at load cell input terminal, and then measure the output voltage of the load cell. The voltage value = 10V * load cell sensitivity * force value / range value. If the measured value is big different from the computed value, it means that the sensor has been damaged.

Product reviews
Load cell customized according to customer needs
5
Jeffery
Avatar
3/3/2021 1:03 AM
Can you customize the load cell according to our requirements?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can. You only need to tell me what specifications/sizes of tension and compression load cells need to be purchased.
I want to buy your load cell, do you have any suggestions?
5
Nomercy
Avatar
8/10/2021 3:56 AM
I am working on an research station i Norway and we have 12 loadcell (50 kg and 300 kg) which we want to connct to an computer, so that we can follow the weight over time. Is that possible, and what do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
We can recommend using our multi-channel junction box to connect the load cell together getting one output, and then connect the junction box output signal to the our Digital Load Cell Amplifier, to output RS485 signal, and then connect to the computer software through the 485 signal to monitor the weight information.
Does your load cell come with a cable matching the 5 pin male plug?
5
Conniew
Avatar
11/11/2021 6:53 PM
Does your load cell come with a cable matching the 5 pin male plug?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our load cell is supplied with a cable that matches the 5-pin male plug.
High sensitivity! Perfect load cell!
5
Alfredo
Avatar
4/28/2022 3:13 AM
I bought it for my workshop and installed last night. very nice accessory. After debugging and testing, it works very well, and the sensitivity is very high. Perfect tension and compression load cell! If I need more, I would buy it again.
Was this review helpful? Yes No (0/0)
I am interested in the ATO-LC-S05 rated for 3 Ton.
5
James
Avatar
3/2/2023 11:14 PM
I see that this is threaded for an M22 hole. Wondering if the cell can be modified to an M30 thread without damaging the cell.
Was this review helpful? Yes No (0/0)
ATO Responded
Customization is acceptable, and the length of the ATO-LC-S05 sensor with a capacity of 3 tons needs to be lengthened, and the MOQ must be more than 2 to be customized. We can quote only if you can accept it.
About thread pitch specification
4
Luxia
Avatar
12/10/2024 12:06 AM
I am wondering what the thread pitch specification is on these load cells that I just placed an order for. It says M30 but no pitch stated.
Was this review helpful? Yes No (0/0)
ATO Responded
The thread specification of the weighing sensor is M30*3.5.
Impact Load
5
Charlene
Avatar
7/24/2026 12:57 AM
Can this load cell withstand impact loads below its rated load (5000 kg, 0.05 s)?
Was this review helpful? Yes No (0/0)
ATO Responded
We typically recommend using 70%-80% of the sensor's full scale. If your application involves impact forces of 5 tons, we recommend purchasing a 7-ton or 10-ton capacity load cell.
Only registered users can write reviews
Customers who bought this item also bought

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

5 Digit Display Controller for Load Cells

ATO-DPM-LC5D
$210.80
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

Load Cell Junction Box for Scales, 2/3/4/6/8/10 Inlets to 1 Outlet

ATO-LCBOX-10I
$66.67
Multi-channel load cell junction box has 2/3/4/6/8/10 inlets and 1 outlet, aluminum alloy casing, good anti-interference, special for waterproof sealing joint, waterproof and dustproof rubber gasket for cover, easy to assemble and debug. Each channel can be adjusted balance to prevent damage to the sensor caused by inductive lightning and surge signals.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Compression Load Cell, 300kg/500kg/2 ton/10 ton/15 ton to 30 ton

ATO-LC-TC03
$157.78
Compression load cell is special designed for weight measurement, with compact structure, pouring sealant or welding seal, low height, all stainless steel, good anti-eccentric load performance and corrosion-resistant. Load cell can be applied for platform scale, truck scale, rail weighbridge and automated measurement and control areas.