Capacitive Proximity Sensor, M30, 2 Wire, 110V

$39.55
M30 proximity sensor can detect nonmetal (or metal), plastic, water, liquid level and powder height, with small size, long life, low cost, unshielded type installation, anti-interference ability, 20mm detection distance, supply voltage AC 110V, manufacturer direct sale. The proximity sensor features insulation resistance of ≥50MΩ between the charging section and housing (DC500 megohmmeter) and an IP67 protection rating.
SKU: ATO-PROS-C30
*
Free Shipping
Delivery date: 6-12 days

Capacitive proximity sensor with M30*1.5 thread, AC 2 wire output, manufacturer direct sale. The capacitive proximity sensor shell is made of nickel-plated brass, and the detection surface is made of ABS plastic, which is highly corrosion-resistant.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC

Specification

ModelATO-PSC-30AHJ
Installation typeUnshieldedShielded
All the output methodsDC typeNPNNONO
NCNC
PNPNONO
NCNC
AC type2 wireNONO
NCNC
Detection range20mm±10%10mm±10%
Setting distance0-18mm0-8mm
Delay distance≤10% detection range
Detection objectAny dielectric substance
Standard detection objectSPCC iron 50*50*1mm
Response frequencyDC: 0.5kHz, AC: 25Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor capacitive M30 dimensional drawing

Wiring diagram

Proximity sensor AC 2-wire wiring

Tips: Parallel and series connection of proximity sensor

Parallel connection: OR connection, NPN and PNP type can't be used in combination. Parallel proximity sensors are in OR connection. The load can be driven once any one of proximity sensors is operating. The number of proximity sensor depends on the sum of leakage current. As long as it does not affect the load operation, more proximity sensors can be connected.
Series connection: When proximity sensors are in AND connection, the load can be driven by all the proximity sensors operation. The number of proximity sensors depends on the sum of their saturation voltages. As long as it does not affect the voltage of power supply, more proximity sensors can be connected. The response frequency of proximity sensor is the accumulation of initial reset of each proximity sensor.

How to Count Using Photoelectric Sensor?

In this video, ATO will show you how to count using slot photoelectric sensors and digital counters.

Product reviews
Proximity sensor function as expected
5
anna
Avatar
10/26/2022 2:37 AM
I use the proximity sensor for touchscreen phones. It is so good that it works as expected. Low price and small size. It is installed in the phone that the sensor can tell when the phone is close to a person's face and turn off the touch function of the screen. It is easy to operate.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Capacitive proximity sensor with M30*1.5 thread, AC 2 wire output, manufacturer direct sale. The capacitive proximity sensor shell is made of nickel-plated brass, and the detection surface is made of ABS plastic, which is highly corrosion-resistant.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC

Specification

ModelATO-PSC-30AHJ
Installation typeUnshieldedShielded
All the output methodsDC typeNPNNONO
NCNC
PNPNONO
NCNC
AC type2 wireNONO
NCNC
Detection range20mm±10%10mm±10%
Setting distance0-18mm0-8mm
Delay distance≤10% detection range
Detection objectAny dielectric substance
Standard detection objectSPCC iron 50*50*1mm
Response frequencyDC: 0.5kHz, AC: 25Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor capacitive M30 dimensional drawing

Wiring diagram

Proximity sensor AC 2-wire wiring

Tips: Parallel and series connection of proximity sensor

Parallel connection: OR connection, NPN and PNP type can't be used in combination. Parallel proximity sensors are in OR connection. The load can be driven once any one of proximity sensors is operating. The number of proximity sensor depends on the sum of leakage current. As long as it does not affect the load operation, more proximity sensors can be connected.
Series connection: When proximity sensors are in AND connection, the load can be driven by all the proximity sensors operation. The number of proximity sensors depends on the sum of their saturation voltages. As long as it does not affect the voltage of power supply, more proximity sensors can be connected. The response frequency of proximity sensor is the accumulation of initial reset of each proximity sensor.

Product reviews
Proximity sensor function as expected
5
anna
Avatar
10/26/2022 2:37 AM
I use the proximity sensor for touchscreen phones. It is so good that it works as expected. Low price and small size. It is installed in the phone that the sensor can tell when the phone is close to a person's face and turn off the touch function of the screen. It is easy to operate.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews