Inclinometer Sensor

ATO Inclinometer Sensor Selection Guide

Choosing the right inclinometer sensor depends on measurement type (static or dynamic), required accuracy, number of axes, output signal type, and installation environment such as industrial machinery, outdoor structures, or mobile equipment.
ATO offers different types of inclinometer sensors, including tilt switch sensors, analog output sensors, digital RS485 / Modbus sensors, CAN / CANopen sensors, wireless inclinometer sensors, and high-precision digital inclinometer sensors.
These sensors are widely used in construction machinery, solar tracking systems, vehicle attitude monitoring, industrial automation, and structural health monitoring applications.

ATO Inclinometer Sensor Selection Table

Inclinometer sensors are industrial devices used to measure tilt angle relative to gravity, commonly applied in construction machinery, automation systems, AGV/AMR navigation, solar tracking systems, and structural health monitoring. They provide analog or digital outputs such as 4–20mA, RS485 Modbus, CANopen, or wireless signals depending on industrial requirements.

1. Tilt Switches & Alarm Sensors

Tilt switch sensors are commonly used for safety cutoff systems in cranes, construction machinery, and railway monitoring applications. Target environments include construction sites, crane outriggers, and railway safety zones.

Model SKUAxis TypeOutput TypeAccuracyMeasurement RangePrimary Application
ATO-TS-ALLSingle / Dual4–20mA, Modbus, 0–5V, Relay0.1°±10° to ±180°Multi-function tilt alarms
ATO-LCA141Single / DualRelay NO/NC0.1°±15°Heavy equipment safety
ATO-LCA341Single / DualDigital Switch0.1°±15°Underground drilling rigs

2. Standard Industrial & Automation Sensors

Industrial inclinometers are used for continuous angular position measurement in PLC automated machinery. Target environments include factory production lines and standard PLC monitoring loops.

Model SKUAxis TypeOutput TypeAccuracyMeasurement RangePrimary Application
ATO-IMS-118128Single / Dual4–20mA Current0.01°±10° to ±180°Factory automation loops
ATO-IMS-LVTSingle / Dual4–20mA, 0–5V, 0–10V Analog0.25°±10° to ±90°MEMS dynamic tracking
ATO-IMS-MCASingle / DualAnalog / Digital0.3°±10° to ±90°Outdoor liquid environments
ATO-IMS-MK326TDualDigital0.2°±10° to ±90°Automatic solar tracking

3. Digital Communication & Bus Protocol Sensors

Bus protocol inclinometers transmit real-time angular metrics over standardized industrial network topologies. Target environments include distributed control networks and SCADA monitoring setups.

Model SKUAxis TypeOutput TypeAccuracyMeasurement RangePrimary Application
ATO-IMS-116126Single / DualCANopen Bus0.05°±10° to ±90°Vehicle attitude tracking
ATO-IMS-116126MBSingle / DualModbus RS4850.05°±10° to ±90°Industrial SCADA networks
ATO-IMS-MK700Single / DualRS485, TTL, RS2320.3°±90° to ±180°Oil field drilling rigs

4. High-Precision & Metrology-Grade Sensors

High-precision inclinometers measure micro-angular surface deviations with internal thermal compensation algorithms. Target environments include metrology laboratories, structural monitoring, and calibration baselines.

Model SKUAxis TypeOutput TypeAccuracyMeasurement RangePrimary Application
ATO-IMS-518528Single / Dual4–20mA Current0.005°±10° to ±90°Structural health tracking
ATO-IMS-716726Single / DualCAN 2.0 Bus0.008°±15° to ±180°High-speed network logging
ATO-IMS-816826Single / DualRS232, RS485, TTL, RS4220.002°±3° to ±30°Laboratory calibration
ATO-IMS-610620Single / Dual0–5V Voltage0.003°±10° to ±90°Precision tool alignment
ATO-IMS-AVTDualModbus, RS232, RS4850.001°±5° to ±15°Metrology base alignment

5. Dynamic, Wireless & Specialized Devices

Specialized inclinometers track angular orientation during active dynamic movement or via remote wireless telemetry. Target environments include vibrating machinery, remote IoT stations, and field inspections.

Model SKUAxis TypeOutput TypeAccuracyMeasurement RangePrimary Application
ATO-IMS-HDAThree AxisCAN 2.0, RS4850.05°±90° to ±180°Dynamic motion tracking
ATO-IMS-HMI600DualBluetooth Wireless0.01°±90°Remote IoT tracking
ATO-IMS-S2630Single / DualRS232, RS485, 2.4GHz0.1°±10° to ±180°Wireless sensor networking
ATO-ISM-600DualDigital LCD0.01°±10° to ±180°Handheld field auditing

How to Choose the Right ATO Inclinometer Sensor

Choosing the right inclinometer sensor depends on application type, motion condition (static or dynamic), required accuracy, output signal, environmental resistance, and communication method. Different industrial inclinometer sensors are designed for heavy equipment, solar tracking, industrial automation, vehicle systems, wireless monitoring, and ultra-precision measurement.

Key Factors When Choosing an Inclinometer Sensor

Before selecting an inclinometer sensor, consider the following:

  • Measurement type: Static or dynamic inclinometer sensor
  • Axis type: Single-axis or dual-axis tilt measurement
  • Accuracy requirement: Standard industrial accuracy or ultra-high precision
  • Output signal: 4–20mA, 0–5V, RS485, Modbus, CANopen, or wireless transmission
  • Installation environment: Indoor factory, outdoor structure, high vibration, or harsh weather conditions
  • Communication method: Wired industrial bus or wireless remote monitoring

1. For Excavators and Heavy Equipment (Heavy-Duty Inclinometer Sensor)

If you need to monitor cranes, excavators, drilling machines, or mining equipment, choose a heavy-duty inclinometer sensor with strong vibration resistance and rugged casing.

  • Recommended Models: ATO-TS-ALL, ATO-IMS-MCA, ATO-IMS-HDA
  • Best for: Construction machinery, cranes, excavators, and mining equipment requiring automatic tilt alarms (0-55°), IP67 waterproof protection, and real-time anti-tip monitoring.

2. For Solar Tracking Systems (Solar Tracker Inclinometer Sensor)

If you are installing solar panels or photovoltaic arrays, select an outdoor-grade solar tracker inclinometer sensor designed for long-term weather endurance.

  • Recommended Models: ATO-IMS-MK326T, ATO-IMS-MCA, ATO-IMS-118128
  • Best for: Photovoltaic systems, solar tracking arrays, and outdoor solar controllers needing continuous angle adjustments within a wide temperature range (-40°C to +85°C).

3. For Factory Automation and PLC Control (Industrial Inclinometer Sensor)

If you are setting up factory automation lines or machine control loops, choose an industrial inclinometer sensor that easily integrates into standard control networks.

  • Recommended Models: ATO-IMS-118128, ATO-IMS-116126MB, ATO-IMS-LVT
  • Best for: PLC control systems, industrial automation lines, and machine feedback applications requiring standard 4-20mA, Modbus-RTU, or RS485 outputs.

4. For Vehicles and Mobile Robots (Vehicle Inclinometer Sensor)

If you are tracking AGVs, mobile robots, logistics vehicles, or automotive testing systems, choose a specialized vehicle inclinometer sensor that supports rapid dynamic motion.

  • Recommended Models: ATO-IMS-HDA, ATO-IMS-116126, ATO-IMS-716726
  • Best for: AGVs, mobile robots, autonomous vehicles, and automotive testing systems requiring real-time leveling, dynamic tilt compensation, and CAN bus (CANopen) communication.

5. For High Precision and Lab Testing (High Precision Inclinometer Sensor)

If you are doing laboratory calibration, structural testing, or high-end scientific measurements, choose a metrology-grade high precision inclinometer sensor.

  • Recommended Models: ATO-IMS-AVT, ATO-IMS-816826, ATO-IMS-518528
  • Best for: Laboratory calibration instruments, structural testing setups, and scientific measurement devices demanding extreme accuracy down to 0.001° and zero temperature drift.

6. For Wireless and IoT Projects (Wireless Inclinometer Sensor)

If you are monitoring bridges, building safety, or remote infrastructure where running power cables is impossible, choose a wireless inclinometer sensor solution.

  • Recommended Models: ATO-IMS-HMI600, ATO-IMS-S2630
  • Best for: Structural health monitoring, bridge/building tilt detection, and remote IoT projects requiring low-power Bluetooth tracking or automatic 2.4GHz remote networking.

7. For Handheld and Manual Inspections (Handheld Inclinometer Sensor)

If you are a field technician doing on-site manual checks, troubleshooting, or temporary engineering measurements, choose a portable handheld inclinometer sensor.

  • Recommended Models: ATO-ISM-600
  • Best for: On-site manual verifications, field quality control inspections, and automation troubleshooting requiring a dual digital screen for instant visual readings without a PC.

Infographic detailing factors when choosing an inclinometer sensor

Quick Recommendation by Application

The guide below summarizes the recommended models and key use cases for each industry application scenario to help users identify the most suitable inclinometer sensor.

Target ApplicationRecommended Models
Excavators & Heavy EquipmentATO-TS-ALL, ATO-IMS-MCA, ATO-IMS-HDA
Solar Tracking SystemsATO-IMS-MK326T, ATO-IMS-MCA, ATO-IMS-118128
Factory Automation & PLCsATO-IMS-118128, ATO-IMS-116126MB, ATO-IMS-LVT
Vehicles & Mobile RobotsATO-IMS-HDA, ATO-IMS-116126, ATO-IMS-716726
High Precision & Lab TestingATO-IMS-AVT, ATO-IMS-816826, ATO-IMS-518528
Wireless & IoT ProjectsATO-IMS-HMI600, ATO-IMS-S2630
Handheld Manual InspectionsATO-ISM-600

Conclusion

ATO inclinometer sensors are used for industrial tilt measurement applications including construction machinery, solar tracking, vehicle systems, factory automation, wireless IoT monitoring, and precision laboratory calibration. Users should select a model based on output signal type (4–20mA, Modbus, CAN, or wireless), required accuracy (0.3° to 0.001°), and installation environment.

View as Grid List
Sort by
Display per page

Tilt Sensor, Single Axis/Dual Axis, ±10°~±180°

ATO-TS-ALL
$207.69
Single axis/dual axis tilt sensor for sale. It is an industrial inclinometer sensor available with 4-20mA, Modbus RTU, CANopen, 0-5V, relay NO and relay NC output signal. High precision tilt switch is used for measurement within the range ±10°, ±30°, ±60°, ±90° and ±180°, horizontal or vertical installation is optional. The alarm angle valve 0-55° can be selected according to needs.

Tilt Sensor, Relay Output, Single axis/ Dual axis, ±15°

ATO-SCA141
$353.33
Economical price tilt switch with relay NO/NC output, which features measuring range ±15°, power supply 12V/ 24V, working current 40mA, max. alarm output current 1000mA. wide range alarm angle valve 0-55° can be chosen. Single axis/ dual axis incline sensor is suitable for a variety of harsh industrial environments operating.

Tilt Sensor, Relay Output, Single/Dual Axis, ±90°/±180°

ATO-TS-RO
$255.63
Tilt sensor features relay, RS232, TTL, and RS485 outputs, single/dual-axis measurement, ±90°/±180° ranges, 0.1° accuracy, 0.01° resolution, 100 Hz frequency response, and IP67 protection for precise industrial angle monitoring.

Tilt Sensor, Switch Output, Single axis/ Dual axis, ±15°

ATO-LCA341
$190.48
Cheap single axis/ dual axis tilt sensor online for sale, switch output, with measuring range ±15°, absolute accuracy 0.1°, power supply 12V or 24V, wide range alarm angle valve 0-15°. ATO industrial tilt switch is widely used in underground drilling rig attitude navigation, geological equipment tilt detection, railway locomotive monitoring, oil drilling equipment.

Tilt Sensor, Switch Output, Single/Dual Axis, ±90°/±180°

ATO-TS-SO
$184.46
This tilt sensor combines accurate static and dynamic tilt measurement with switch or relay output for automatic alarm and control. With 0.1° static and 0.5° dynamic accuracy, it is ideal for industrial machinery, vehicles, and safety monitoring.

Inclinometer Sensor, Output 4-20mA, ±10°~±180°

ATO-IMS-118128
$207.69
Low price inclinometer sensor for sale. Single axis/dual axis incline sensor, standard current 4-20mA output, optional measuring range ±10°/±30°/±60°/±90°/±180°, maximum accuracy 0.01°, wide voltage input 9-36V. Standard industrial tilt sensor, wide applications.

Inclinometer Sensor, Output 4-20mA, ±10°~±90°

ATO-IMS-518528
$638.46
Single axis or dual axis inclinometer sensor, used for measurement within the range ±10°, ±30°, ±60° or ±90°. High accuracy incline sensor, output industrial standard current 4-20mA, maximum absolute accuracy 0.005°, power supply DC 9-36V, high stability and safety.

Inclinometer Sensor, Output CANopen, ±10°~±90°

ATO-IMS-116126
$253.85
Affordable price inclinometer sensor for sale. single axis and dual axis, measuring range ±10°/±30°/±60°/±90° for selection, output signal CANopen, absolute accuracy 0.05° and rated voltage DC 9-36V. Buy a high precision industrial tilt sensor for harsh industrial control applications.

Inclinometer Sensor, Output CANopen, ±15°~±180°

ATO-IMS-716726
$528.77
Good price inclinometer sensor is designed for high accuracy industrial measurement. Single axis/dual axis tilt sensor comes with high precision, output signal CAN 2.0A or CAN 2.0B, measuring range ±15°/±45°/±60°/±180°, maximum absolute accuracy 0.008°, and wide voltage input DC 9-36V.

Inclinometer Sensor, Output Modbus, ±10°~±90°

ATO-IMS-116126MB
$192.31
Single axis or dual axis inclinometer sensor for sale. High precision tilt switch comes with output signal Modbus, optional measuring range ±10°/±30°/±60°/±90°, output interface RS232, RS485, RS232, UART TTL, absolute accuracy 0.05°, power supply input 9-36V.

Inclinometer Sensor, Output 0-5V, ±10°~±90°

ATO-IMS-610620
$949.85
The provided inclinometer sensor is a tilt detection sensor, available with output 0-5V voltage, optional measuring range ±10°/±30°/±60°/±90°, Maximum measurement accuracy 0.003°, zero temperature coefficient ±0.008°/℃. Single axis/dual axis tilt switch, horizontal or vertical installation for selection.

Inclinometer Sensor, Output RS232/RS485, ±3°~±30°

ATO-IMS-816826
$1,113.38
1 axis or 2 axis inclinometer sensor is an industrial angle tilt sensor, used for measurement with range ±3°, ±10°, ±15° or ±30°. High accuracy sensor, full-temperature compensation, maximum absolute accuracy 0.002°, zero temperature coefficient ±0.0002°/℃. Output signal RS232/RS485/RS422/TTL for selection.

MEMS Inclinometer Sensor, Analog Output, 4-20mA/ 0-10V

ATO-IMS-LVT
$196.76
Buy MEMS inclinometer sensor, analog output can be selected from 0~5V, 0~10V and 4-20mA, etc. to adapt to the needs of different systems, and the measuring range can be optional ±10°, ±30°, ±60° and ±90°. Its accuracy is as high as 0.2°, with long time stability and low temperature drift, 0.2 seconds start-up time to achieve fast response, suitable for dynamic environment.

Dynamic Inclinometer Sensor, 3 Aixs, Output CAN 2.0/ RS485

ATO-IMS-HDA
$417.94
Favorable price of dynamic inclinometer sensor, which provides CAN 2.0/RS485 output and is designed for high precision dynamic measurements. Its measurement range includes ±180° of roll, ±90° of pitch and ±180° of azimuth in 3 axis, and boasts a static accuracy of ±0.05° and a dynamic accuracy of ±0.1°.

Portable Inclinometer Sensor, Dynamic/Static Mode, 3 Axis

ATO-IMS-DS3
$386.99
Portable inclinometer sensor supports static and dynamic measurement across 3 axes, with ±90° 3-axis and ±180° single-axis ranges, 0.02° static accuracy, 0.1° dynamic accuracy, and CAN/ CANopen, RS232, RS485, RS422 or TTL output signals.

Digital Inclinometer Sensor for Solar/Car, Single/Dual axis

ATO-IMS-MK326T
$102.06
Dual-Axis Digital Inclinometer Sensor with 0.1° resolution and 0.2°-0.3° accuracy. Perfect for solar tracking, machinery, and vehicle overload detection. IP67 rated, works from -40°C to +85°C. 3-year warranty.

Waterproof Industrial Inclinometer Sensor, IP67, 1 Axis/2 Axis

ATO-IMS-MCA
$85.88
Low price industrial inclinometer sensor with waterproof IP67 rating is ideal for 1 axis or 2 axis tilt measurement, providing high precision featuring 0.1° resolution and ±0.3° accuracy at 25°C. The tilt sensor ensures fast 0.05s response time and stable operation across -40°C to +85°C. Long service life reaches 50,000 hours with output load exceeding 500 ohms. Insulation impedance over 100 MΩ guarantees reliability in demanding industrial environments.

Explosion Proof Electronic Inclinometer Sensor, Output RS485/TTL

ATO-IMS-MK700
$276.33
High accuracy explosion proof electronic inclinometer sensor for sale with optional RS485/TTL/RS232 output signals. Having single-axis ±180° / dual-axis ±90° measuring range. The tilt sensors have an accuracy of up to 0.3° and a resolution of up to 0.05°, with even higher accuracy options of 0.1° or 0.01° to ensure that accurate measurement data is provided.

High Precision Digital Inclinometer Sensor, 0.001°Accuracy, 2 Axis

ATO-IMS-AVT
$1,323.88
Hot-selling high-precision digital inclinometer sensor, measuring range can be selected from ±5° ~ ±15°, accuracy of 0.001°, to provide 2 axis: X, Y axis inclination measurement, the sensor using RS232 / RS485 / RS422 / TTL / Modbus protocol output, designed for precision equipment to provide high-precision tilt measurement.

Wireless Inclinometer Sensor with Bluetooth, Dual Axis

ATO-IMS-HMI600
$496.58
Ultra-low power consumption, small size, and high performance wireless inclinometer sensor using Bluetooth output, providing ± 90° measurement range. Suitable for accurate tilt measurement, the tilt sensor's measurement 2 axis for the X, Y axis, with 0.01 ° of high accuracy, response time of only 0.05 seconds, for the user does not have a power supply to use the conditions or real-time dynamic measurement of the object attitude angle of the industry applications.

Inclinometer Sensor

Close
Filter by Clear All