Fiber Optic Sensor, NPN/PNP, NO/NC

$106.35
Fiber optic sensor features NPN/PNP, NO/NC output modes for selection. It has fast response, high frequency, anti-electromagnetic interference, ambient light resistance, easy to install and maintain. Fiber sensors are usually used for detection, counting and position control in the occasions with high accuracy requirement and small space.
SKU: ATO-FIBOS
*
Free Shipping
Delivery date: 6-12 days

Fiber optic sensor, also known as fiber senor or fiber amplifier. It sends the optical signal from the light source to the modulator through the optical fiber, so that the measured parameter interacts with the light entering the modulation area, resulting in the optical properties of the light (such as light intensity, wavelength, frequency, phase position, polarization state, etc.) changed. Then the changed modulated signal source will be sent to the optical detector through the optical fiber. After demodulation, the measured parameter is obtained.

Applications:
Fiber optic sensors are widely used in food, packaging, electronics and other automation industry. Fiber optic sensors are usually used for detection, counting and position control.
Types of fiber optic sensor:
1. Multiple output fiber optic sensor (FD1 series)
Advantages:

  • Fiber optic sensor with NPN/PNP, NO/NC output modes
  • Adjust function with time delay control
  • Sensitivity adjust function
  • Fast response, high frequency
  • Two LED indicators, green LED shows the power status and red LED shows the output status
  • Adjust potentiometer for detect distance control
  • Anti-electromagnetic interference, ambient light resistance
  • Plastic dust-proof casing

Specification:

ItemFD1-NPR
Weight0.5 kg
Sensing objectOpaque object
Power voltageDC 12~24V±10%
Current consumption≤40mA
Response time≤100ms
Load current≤100mA
Protection circuitOverload protection, reverse polarity protection
Output modesNPN/PNP, NO/NC
Light sourceRed light LED
IndicatorPower: Green LED; Output: Red LED
Ambient temperature0~50℃
Ambient humidity35~85%RH
Intensity of illuminationIncandescent lamp: 3, 000lux
Withstanding voltageAC 1000V 1min. 50/60Hz
Insulation resistance≥50MΩ (base on DC 500V megger)
Anti-vibration10~50Hz, double-amplitude, 0.75mm, in each of x, y and z direction for two hours
Anti-concussionAcceleration: 500m/s2 (approx 50G) in each of x, y and z direction for 3 times
Protection classIP65
Casing materialsPC+ABS
ConnectionPVC cable with 2m length

Dimensional drawing (unit: mm):
Fiber optic sensor FD1 dimensional drawing
Wiring diagram:
Fiber optic sensor FD1 wiring diagram

2. Digital display fiber optic sensor (FD2 series)
Advantages:

  • Fiber optic sensor with leading technology - dual monitor mode
  • Build-in high speed digital processing chip
  • Automatic and manual correction functions for selection
  • High-accuracy survey
  • Easy to install and maintain

Specification:

ItemMain unit1-wire extension unitNo-wire extension unit
FD2-NB11R (NPN NO/NC output)FD2-NB12R (NPN NO/NC output)FD2-NB10R (NPN NO/NC output)
FD2-PB11R (PNP NO/NC output)FD2-PB12R (PNP NO/NC output)-
Weight0.8 kg
Power supplyDC 12~24V
Current consumption<60mA
Voltage drop<1V-
Load current<100mA-
Response time<200us (FINE), <400us (TURBO), <800us (SUPER)410us~1.7ms
Detection accuracy>0.01mm (depends on fiber)
Light source660nm red visible light
Ambient lightIncandescent lamp: 3000lux, sunlight: 10000lux
Circuit protectionSurge, reverse polarity and overload protection
Output indicate4 LED digital display, LED bar display, operation indicator
FunctionsEmitter power optional (FINE/TURBO/SPER), output time delay optional (0ms/10ms/40ms)
Ambient temperature-10~+50℃
Withstanding voltageAC 1000V 50/60Hz 60s
Insulation resistance≥50MΩ (base on DC 500V megger)
Anti-vibrationAmplitude 0.5mm, frequency 10~50Hz
Anti-shock500m/s2 (50G) in each x, y and z direction for 3 times
Protection classIP54
Casing materialPC+ABS
ConnectionPVC cable with 2m length

Dimensional drawing:
Fiber optic sensor FD2 dimensional drawing
Wiring diagram:
Fiber optic sensor FD2 wiring diagram

It's a video of digital fiber optic sensor/amplifier wiring and setting.

Product reviews
Stable Detection
5
Leander
Avatar
9/21/2026 7:05 PM
This fiber optic sensor has worked reliably in our compact detection setup. The response is fast and the signal remains stable even around other electrical equipment. Its small size also made installation easier in a space where a standard sensor would have been difficult to fit.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Fiber optic sensor, also known as fiber senor or fiber amplifier. It sends the optical signal from the light source to the modulator through the optical fiber, so that the measured parameter interacts with the light entering the modulation area, resulting in the optical properties of the light (such as light intensity, wavelength, frequency, phase position, polarization state, etc.) changed. Then the changed modulated signal source will be sent to the optical detector through the optical fiber. After demodulation, the measured parameter is obtained.

Applications:
Fiber optic sensors are widely used in food, packaging, electronics and other automation industry. Fiber optic sensors are usually used for detection, counting and position control.
Types of fiber optic sensor:
1. Multiple output fiber optic sensor (FD1 series)
Advantages:

  • Fiber optic sensor with NPN/PNP, NO/NC output modes
  • Adjust function with time delay control
  • Sensitivity adjust function
  • Fast response, high frequency
  • Two LED indicators, green LED shows the power status and red LED shows the output status
  • Adjust potentiometer for detect distance control
  • Anti-electromagnetic interference, ambient light resistance
  • Plastic dust-proof casing

Specification:

ItemFD1-NPR
Weight0.5 kg
Sensing objectOpaque object
Power voltageDC 12~24V±10%
Current consumption≤40mA
Response time≤100ms
Load current≤100mA
Protection circuitOverload protection, reverse polarity protection
Output modesNPN/PNP, NO/NC
Light sourceRed light LED
IndicatorPower: Green LED; Output: Red LED
Ambient temperature0~50℃
Ambient humidity35~85%RH
Intensity of illuminationIncandescent lamp: 3, 000lux
Withstanding voltageAC 1000V 1min. 50/60Hz
Insulation resistance≥50MΩ (base on DC 500V megger)
Anti-vibration10~50Hz, double-amplitude, 0.75mm, in each of x, y and z direction for two hours
Anti-concussionAcceleration: 500m/s2 (approx 50G) in each of x, y and z direction for 3 times
Protection classIP65
Casing materialsPC+ABS
ConnectionPVC cable with 2m length

Dimensional drawing (unit: mm):
Fiber optic sensor FD1 dimensional drawing
Wiring diagram:
Fiber optic sensor FD1 wiring diagram

2. Digital display fiber optic sensor (FD2 series)
Advantages:

  • Fiber optic sensor with leading technology - dual monitor mode
  • Build-in high speed digital processing chip
  • Automatic and manual correction functions for selection
  • High-accuracy survey
  • Easy to install and maintain

Specification:

ItemMain unit1-wire extension unitNo-wire extension unit
FD2-NB11R (NPN NO/NC output)FD2-NB12R (NPN NO/NC output)FD2-NB10R (NPN NO/NC output)
FD2-PB11R (PNP NO/NC output)FD2-PB12R (PNP NO/NC output)-
Weight0.8 kg
Power supplyDC 12~24V
Current consumption<60mA
Voltage drop<1V-
Load current<100mA-
Response time<200us (FINE), <400us (TURBO), <800us (SUPER)410us~1.7ms
Detection accuracy>0.01mm (depends on fiber)
Light source660nm red visible light
Ambient lightIncandescent lamp: 3000lux, sunlight: 10000lux
Circuit protectionSurge, reverse polarity and overload protection
Output indicate4 LED digital display, LED bar display, operation indicator
FunctionsEmitter power optional (FINE/TURBO/SPER), output time delay optional (0ms/10ms/40ms)
Ambient temperature-10~+50℃
Withstanding voltageAC 1000V 50/60Hz 60s
Insulation resistance≥50MΩ (base on DC 500V megger)
Anti-vibrationAmplitude 0.5mm, frequency 10~50Hz
Anti-shock500m/s2 (50G) in each x, y and z direction for 3 times
Protection classIP54
Casing materialPC+ABS
ConnectionPVC cable with 2m length

Dimensional drawing:
Fiber optic sensor FD2 dimensional drawing
Wiring diagram:
Fiber optic sensor FD2 wiring diagram

Product reviews
Stable Detection
5
Leander
Avatar
9/21/2026 7:05 PM
This fiber optic sensor has worked reliably in our compact detection setup. The response is fast and the signal remains stable even around other electrical equipment. Its small size also made installation easier in a space where a standard sensor would have been difficult to fit.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews