Tilt Sensor, Relay Output, Single axis/ Dual axis, ±15°

$353.33
Economical price tilt switch with relay NO/NC output, which features measuring range ±15°, power supply 12V/ 24V, working current 40mA, max. alarm output current 1000mA. wide range alarm angle valve 0-55° can be chosen. Single axis/ dual axis incline sensor is suitable for a variety of harsh industrial environments operating.
SKU: ATO-SCA141
*
*
*
Free Shipping
Delivery date: 6-12 days

Factory price inclinometer sensor for sale, comes with relay NO/NC output, measuring range ±15° absolute accuracy 0.1°, power on time 0.1s, and quick response time 0.2s. High precision tilt sensor is widely used for application like underground drilling rig attitude navigation, geological equipment tilt detection, railway locomotive monitoring, oil drilling equipment.

Specification

ModelATO-SCA141/142
Alarm Angle Value0-55°
Power supply9-36V DC
Max. alarm output current1000mA
Working current40mA
Measuring range±15°
Measuring axisX, Y
Resolution0.01°
Absolute accuracy0.05°
Long-term stability0.05
Zero temp. coeffiecient-40~85℃±0.006℃
Temp. sensitivity coefficient-40~85℃ ≤ 100 ppm/℃
Power on time0.1s
Response time0.2s
MTBF≥50000 h per time
IR≥100M
Impact resistance100g@11ms, 3 times/ axis (half sinusoid)
Anti-shock10grms, 10-1000Hz
WaterproofIP67
Cable1m, shield cable: 4*0.04mm²
CertificateCE, FCC, RoHS
Warranty12 months


Dimension (Unit=mm)

Dimension of relay output tilt sensor

Tilt Sensor Installation Direction Diagram

The installation must guarantee the inclinometer sensor bottom is parallel to measured face,and reduce the influence of dynamic and acceleration to the tilt sensor. This inclinometer sensor can be installed horizontally or mounted vertically, for installation please refer to the following scheme.

Installation of relay output tilt sensor

Tips: Working Principle of Tilt Sensor

The measurement range is ±15°. When the inclination value is greater than the preset inclination threshold, a switch signal (output voltage=supply voltage) will be output to drive the solenoid valve. Normally, it does not alarm for forward and reverse. The alarm number is output when the alarm threshold is exceeded; the alarm signal is output in the reverse direction, and the alarm is stopped when the alarm threshold is exceeded; the alarm angle can be set by the inclination switch, when the safe inclination value is exceeded, the switch signal will be output to shut down the system, and it can also be driven The alarm is easy to install, has strong resistance to external electromagnetic interference, and can withstand large shocks and vibrations.

Product reviews
Pleasant shopping experience
5
Yeager
Avatar
5/26/2022 2:21 AM
I bought this relay output tilt sensor to replace my old one, the sensor worked well and the apperance is well-maded! I love the tilt senor cuz it makes my job easier!
Was this review helpful? Yes No (0/0)
Really cool tilt sensor
5
Defrank
Avatar
12/11/2022 11:14 PM
I added this tilt sensor to my system as an additional layer of protection for my aftermarket wheels. My installer had no problem installing and it works great. Really cool thing.
Was this review helpful? Yes No (0/0)
I have some questions
5
Wenzel
Avatar
11/26/2024 1:23 AM
Are the angles field programmable? Can the X axis and Y axis have different angles? The system can be connected to a 28VDC power source, the website states 12V/24V, is there a tolerance to this input voltage? Is the operating range for the device -40-85℃? What is the storage temperature non-operating? What is the current rating for the relay output?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The alarm angle is confirmed at the factory and can Not be programmed on site.
2. The alarm angle settings for the X-axis and Y-axis are the same.
3. Power supply can be any voltage within the range of 9-36V.
4. The maximum output current of the relay is 1000 mA, and the operating and storage temperatures of the device are -40-85℃.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Factory price inclinometer sensor for sale, comes with relay NO/NC output, measuring range ±15° absolute accuracy 0.1°, power on time 0.1s, and quick response time 0.2s. High precision tilt sensor is widely used for application like underground drilling rig attitude navigation, geological equipment tilt detection, railway locomotive monitoring, oil drilling equipment.

Specification

ModelATO-SCA141/142
Alarm Angle Value0-55°
Power supply9-36V DC
Max. alarm output current1000mA
Working current40mA
Measuring range±15°
Measuring axisX, Y
Resolution0.01°
Absolute accuracy0.05°
Long-term stability0.05
Zero temp. coeffiecient-40~85℃±0.006℃
Temp. sensitivity coefficient-40~85℃ ≤ 100 ppm/℃
Power on time0.1s
Response time0.2s
MTBF≥50000 h per time
IR≥100M
Impact resistance100g@11ms, 3 times/ axis (half sinusoid)
Anti-shock10grms, 10-1000Hz
WaterproofIP67
Cable1m, shield cable: 4*0.04mm²
CertificateCE, FCC, RoHS
Warranty12 months


Dimension (Unit=mm)

Dimension of relay output tilt sensor

Tilt Sensor Installation Direction Diagram

The installation must guarantee the inclinometer sensor bottom is parallel to measured face,and reduce the influence of dynamic and acceleration to the tilt sensor. This inclinometer sensor can be installed horizontally or mounted vertically, for installation please refer to the following scheme.

Installation of relay output tilt sensor

Tips: Working Principle of Tilt Sensor

The measurement range is ±15°. When the inclination value is greater than the preset inclination threshold, a switch signal (output voltage=supply voltage) will be output to drive the solenoid valve. Normally, it does not alarm for forward and reverse. The alarm number is output when the alarm threshold is exceeded; the alarm signal is output in the reverse direction, and the alarm is stopped when the alarm threshold is exceeded; the alarm angle can be set by the inclination switch, when the safe inclination value is exceeded, the switch signal will be output to shut down the system, and it can also be driven The alarm is easy to install, has strong resistance to external electromagnetic interference, and can withstand large shocks and vibrations.

Product reviews
Pleasant shopping experience
5
Yeager
Avatar
5/26/2022 2:21 AM
I bought this relay output tilt sensor to replace my old one, the sensor worked well and the apperance is well-maded! I love the tilt senor cuz it makes my job easier!
Was this review helpful? Yes No (0/0)
Really cool tilt sensor
5
Defrank
Avatar
12/11/2022 11:14 PM
I added this tilt sensor to my system as an additional layer of protection for my aftermarket wheels. My installer had no problem installing and it works great. Really cool thing.
Was this review helpful? Yes No (0/0)
I have some questions
5
Wenzel
Avatar
11/26/2024 1:23 AM
Are the angles field programmable? Can the X axis and Y axis have different angles? The system can be connected to a 28VDC power source, the website states 12V/24V, is there a tolerance to this input voltage? Is the operating range for the device -40-85℃? What is the storage temperature non-operating? What is the current rating for the relay output?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The alarm angle is confirmed at the factory and can Not be programmed on site.
2. The alarm angle settings for the X-axis and Y-axis are the same.
3. Power supply can be any voltage within the range of 9-36V.
4. The maximum output current of the relay is 1000 mA, and the operating and storage temperatures of the device are -40-85℃.
Only registered users can write reviews