MEMS Inclinometer Sensor, Analog Output, 4-20mA/ 0-10V

$196.76
Buy MEMS inclinometer sensor, analog output can be selected from 0~5V, 0~10V and 4-20mA, etc. to adapt to the needs of different systems, and the measuring range can be optional ±10°, ±30°, ±60° and ±90°. Its accuracy is as high as 0.2°, with long time stability and low temperature drift, 0.2 seconds start-up time to achieve fast response, suitable for dynamic environment.
SKU: ATO-IMS-LVT
*
*
Free Shipping
Delivery date: 6-12 days

Analog output MEMS inclinometer sensor for sale, high-precision solutions (0~5V/ 0.5~4.5V/ 0~10V/ 0~20mA/ 0~24mA/ 4-20mA output signals can be selected), with excellent long-term stability (≤ 0.3 °). The tilt sensor has excellent impact resistance (3000g), IP67 waterproof rating, wide temperature operating range (-40℃ to +85℃) and rugged aluminum alloy housing, equipped with standard 1.5m abrasion-resistant cable for easy installation.

Specifications

ModelATO-LVT410TATO-LVT418TATO-LVT420T
Measuring Range±10°/±30°/±60°/±90° (optional)
Output Signal0~5V/0~4.5V/0~10V (optional)0~20mA/0~24mA/4-20mA (optional)0~5V/0~4.5V/0~10V (optional)
Measuring AxisX axisX axisX, Y axis
Zero Temperature Drift±0.05°/°C
Sensitivity Temperature Coefficient≤200ppm/°C
Zero Offset0~5V output -2.5V0~20mA output 10mA0~5V output -2.5V
0.5~4.5V output -2.5V0~24mA output 12mA0.5~4.5V output -2.5V
0~10V output -5V4-20mA output 12mA0~10V output -5V
Frequency ResponseDC response 100Hz
ResolutionNormal width 5Hz, 0.05°
Accuracy0.2°
Long Term Stability≤0.3°
Power-up Time0.2s
Response Time0.01s
Average Operating Time≥55000 hours/trip
Shock Resistance3000g, 0.5ms,3 times/axis
Vibration Resistance10grms, 10~1000Hz
Insulation Resistance≥100MΩ
Supply Voltage9~36V
Working Current40mA
Output LoadResistivity: 10kΩ0~500kΩResistivity: 10kΩ
Capacitance: 20nF/Capacitance: 20nF
Operating Temperature-40℃~+85℃
Storage Temperature-55℃~+100℃
Housing MaterialAluminum alloy with matte oxidation
MountingThree M4 screws
Waterproof RatingIP67
CableStandard 1.5 meter length, abrasion resistant, oil resistant, wide temperature range, shielded cable 6*0.3mm2
Weight60g (without box)


Dimension (unit: mm)

MEMS inclinometer sensor dimension

Measuring of Axial Direction

MEMS inclinometer sensor measuring axial directions

Wiring Diagram

MEMS inclinometer sensor wiring diagram

123
RedBlackWhite
VCC (power positive)GND (power negative)Out X


Application

MEMS inclinometer sensor application

Tips: MEMS inclinometer sensor voltage output and angle calculation formula

Inclination angle= Sensitivity *(Vout - Voffset)

The current inclination angle

Vout: Sensor output voltage value, unit V

Voffset: Voltage output from the sensor at zero position (usually 2.5V).

Sensitivity: Sensor sensitivity: Inclinometer sensor sensitivity is the ratio of the corresponding voltage change when the sensor tilt angle changes, e.g. if the sensor range is ±90° and the corresponding voltage change is 0-5V, then the sensor sensitivity is 36.

  • 90-(-90)= sensitivity* (5-0)

If the current output voltage is 3.75V, the corresponding inclination is 45 degrees.

  • 45=36*(3.75-2.5)

For example, if the range of the sensor is ±30°, and the corresponding voltage change is 0-5V, then the sensor sensitivity is 12.

  • 30-(-30)= sensitivity* (5-0)

If the current output voltage is 3.75V, the corresponding tilt angle is 15 degrees.

  • 15=12* (3.75-2.5)

Therefore, the sensitivity of the inclinometer sensor corresponds to the range.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Analog output MEMS inclinometer sensor for sale, high-precision solutions (0~5V/ 0.5~4.5V/ 0~10V/ 0~20mA/ 0~24mA/ 4-20mA output signals can be selected), with excellent long-term stability (≤ 0.3 °). The tilt sensor has excellent impact resistance (3000g), IP67 waterproof rating, wide temperature operating range (-40℃ to +85℃) and rugged aluminum alloy housing, equipped with standard 1.5m abrasion-resistant cable for easy installation.

Specifications

ModelATO-LVT410TATO-LVT418TATO-LVT420T
Measuring Range±10°/±30°/±60°/±90° (optional)
Output Signal0~5V/0~4.5V/0~10V (optional)0~20mA/0~24mA/4-20mA (optional)0~5V/0~4.5V/0~10V (optional)
Measuring AxisX axisX axisX, Y axis
Zero Temperature Drift±0.05°/°C
Sensitivity Temperature Coefficient≤200ppm/°C
Zero Offset0~5V output -2.5V0~20mA output 10mA0~5V output -2.5V
0.5~4.5V output -2.5V0~24mA output 12mA0.5~4.5V output -2.5V
0~10V output -5V4-20mA output 12mA0~10V output -5V
Frequency ResponseDC response 100Hz
ResolutionNormal width 5Hz, 0.05°
Accuracy0.2°
Long Term Stability≤0.3°
Power-up Time0.2s
Response Time0.01s
Average Operating Time≥55000 hours/trip
Shock Resistance3000g, 0.5ms,3 times/axis
Vibration Resistance10grms, 10~1000Hz
Insulation Resistance≥100MΩ
Supply Voltage9~36V
Working Current40mA
Output LoadResistivity: 10kΩ0~500kΩResistivity: 10kΩ
Capacitance: 20nF/Capacitance: 20nF
Operating Temperature-40℃~+85℃
Storage Temperature-55℃~+100℃
Housing MaterialAluminum alloy with matte oxidation
MountingThree M4 screws
Waterproof RatingIP67
CableStandard 1.5 meter length, abrasion resistant, oil resistant, wide temperature range, shielded cable 6*0.3mm2
Weight60g (without box)


Dimension (unit: mm)

MEMS inclinometer sensor dimension

Measuring of Axial Direction

MEMS inclinometer sensor measuring axial directions

Wiring Diagram

MEMS inclinometer sensor wiring diagram

123
RedBlackWhite
VCC (power positive)GND (power negative)Out X


Application

MEMS inclinometer sensor application

Tips: MEMS inclinometer sensor voltage output and angle calculation formula

Inclination angle= Sensitivity *(Vout - Voffset)

The current inclination angle

Vout: Sensor output voltage value, unit V

Voffset: Voltage output from the sensor at zero position (usually 2.5V).

Sensitivity: Sensor sensitivity: Inclinometer sensor sensitivity is the ratio of the corresponding voltage change when the sensor tilt angle changes, e.g. if the sensor range is ±90° and the corresponding voltage change is 0-5V, then the sensor sensitivity is 36.

  • 90-(-90)= sensitivity* (5-0)

If the current output voltage is 3.75V, the corresponding inclination is 45 degrees.

  • 45=36*(3.75-2.5)

For example, if the range of the sensor is ±30°, and the corresponding voltage change is 0-5V, then the sensor sensitivity is 12.

  • 30-(-30)= sensitivity* (5-0)

If the current output voltage is 3.75V, the corresponding tilt angle is 15 degrees.

  • 15=12* (3.75-2.5)

Therefore, the sensitivity of the inclinometer sensor corresponds to the range.

Only registered users can write reviews