Hydraulic Orbital Motor, 200cc/rev

$322.89
Low speed high torque hydraulic orbital motor at affordable price. It is a spool valve motor with 200cc/r displacement, reliable operation and high efficiency, selectable flat key shaft or splined shaft, and mounting flanges of 2 bolts and 4 bolts. This orbit motor can be used in parallel or in series.
SKU: ATO-HOM-200
*
*
Free Shipping
Delivery date: 6-12 days

ATO Hydraulic orbital motor is designed for disc distribution flow, which can provide improved performance at low speed and higher volumetric for the automatically compensated wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

ModelATO-OMP-200
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement200 cc/rev (200 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous284 rpm
Intermittent339 rpm
PressureContinuous110 ∆Bar
Intermittent124 ∆Bar
TorqueContinuous285 Nm
Intermittent319 Nm
Weight8kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=167mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=173mm

Details

Hydraulic Orbital Motor Details

Tips: What do you need to pay attention to when the hydraulic orbital motor fails and needs to be disassembled?

  1. Do not bump the joint surfaces during disassembly and assembly. If there is any bump, the hydraulic orbital motor must be repaired before assembling.
  2. Wash all parts with gasoline or kerosene before assembling. It is forbidden to use cotton yarn or rags to scrub the parts. Brush or silk cloth should be used. Never immerse the rubber ring in gasoline. After the orbit motor is installed, it is necessary to add 50-100 ml of hydraulic oil to the two oil ports before installing the machine and rotating the output oil. If there is no abnormal phenomenon, the machine can be installed.
  3. To ensure the correct rotation direction of the orbital motor, pay attention to the positional relationship between the rotor and the output shaft.
  4. The back cover bolts must be tightened diagonally gradually with a tightening torque of 4~5 kgf.m.
Product reviews
Good quality works well.
5
Tambor
Avatar
3/14/2022 7:07 PM
This hydraulic orbital motor was delivered on time! I like it fine it does good job, worked perfectly for our wood splitter.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO Hydraulic orbital motor is designed for disc distribution flow, which can provide improved performance at low speed and higher volumetric for the automatically compensated wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

ModelATO-OMP-200
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement200 cc/rev (200 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous284 rpm
Intermittent339 rpm
PressureContinuous110 ∆Bar
Intermittent124 ∆Bar
TorqueContinuous285 Nm
Intermittent319 Nm
Weight8kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=167mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=173mm

Details

Hydraulic Orbital Motor Details

Tips: What do you need to pay attention to when the hydraulic orbital motor fails and needs to be disassembled?

  1. Do not bump the joint surfaces during disassembly and assembly. If there is any bump, the hydraulic orbital motor must be repaired before assembling.
  2. Wash all parts with gasoline or kerosene before assembling. It is forbidden to use cotton yarn or rags to scrub the parts. Brush or silk cloth should be used. Never immerse the rubber ring in gasoline. After the orbit motor is installed, it is necessary to add 50-100 ml of hydraulic oil to the two oil ports before installing the machine and rotating the output oil. If there is no abnormal phenomenon, the machine can be installed.
  3. To ensure the correct rotation direction of the orbital motor, pay attention to the positional relationship between the rotor and the output shaft.
  4. The back cover bolts must be tightened diagonally gradually with a tightening torque of 4~5 kgf.m.
Product reviews
Good quality works well.
5
Tambor
Avatar
3/14/2022 7:07 PM
This hydraulic orbital motor was delivered on time! I like it fine it does good job, worked perfectly for our wood splitter.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Hydraulic Orbital Motor, 50cc/rev

ATO-HOM-50
$316.89
High peformance hydraulic orbital motor online sale, it is widely applied in agriculture machinery, fishing machinery, plastic industry, and construction machinery, etc. It can be used in parallel or series with 50 cc/rev displacement and flat key shaft or splined shaft. Mounting flanges of 2 bolts and 4 bolts are available.

Hydraulic Orbital Motor, 160cc/rev

ATO-HOM-160
$321.89
Buy hydraulic orbital motor online, low speed high torque with 160cc/r displacement. It is a spool valve motor can be used in parallel or series, selectable flat key shaft or splined shaft, mounting flanges of 2 bolts and 4 bolts.

Hydraulic Orbital Motor, 250cc/rev

ATO-HOM-250
$324.59
Factory price hydraulic orbital motor with high performance shaft, can bear high pressure, high speed and high radial force. Mounting flanges of 2 bolts and 4 bolts, easy to install. 250cc/r displacement, max. speed up to 281 rpm, torque up to 378Nm, can be used in parallel or series.