Hydraulic Orbital Motor, 370cc/rev

$328.49
High torque low speed orbital hydraulic motor is widely applied in agriculture machinery, fishing machinery, plastic industry, and construction machinery, etc. It can be used in parallel or series with 370 cc/rev displacement and flat key shaft or splined shaft. Mounting flanges of 2 bolts and 4 bolts are available.
SKU: ATO-HOM-370
*
*
Free Shipping
Delivery date: 6-12 days

Economical price hydraulic orbital motor is designed for disc distribution flow, which can provide improved performance at low speed and higher volumetric for the automatic compensate wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

ModelATO-OMP-370
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement370 cc/rev (370 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous167 rpm
Intermittent199 rpm
PressureContinuous90 ∆Bar
Intermittent100 ∆Bar
TorqueContinuous450 Nm
Intermittent500 Nm
Weight8.5kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=195mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=200mm

Details

Hydraulic Orbital Motor Details

Tips: How to improve the hydraulic orbital motor speed?

Increasing the flow rate can increase the speed of the hydraulic orbital motor, but it will more or less affect its service life. As long as it is within its rated power range, there is no problem. If the oil pressure reaches the rated pressure, increasing the speed will exceed the power range it can withstand. But it will damage the life of the cycloid hydraulic motor.

Increasing the flow rate can only increase the speed limit, like 500 rpm to 900 rpm. It is recommended to change the model of the motor, the cycloid motor flow is increased to a certain extent, the speed will not increase uncontrollably, the internal oil pressure increases, the internal leakage increases, the efficiency drops directly, or the motor is damaged.

Product reviews
Works well
5
Anna
Avatar
10/27/2026 7:11 PM
We installed two of these orbital motors in parallel for our fishing machinery. Speed stays balanced. It handles intermittent peak pressure without sudden stalling issues.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Economical price hydraulic orbital motor is designed for disc distribution flow, which can provide improved performance at low speed and higher volumetric for the automatic compensate wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

ModelATO-OMP-370
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement370 cc/rev (370 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous167 rpm
Intermittent199 rpm
PressureContinuous90 ∆Bar
Intermittent100 ∆Bar
TorqueContinuous450 Nm
Intermittent500 Nm
Weight8.5kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=195mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=200mm

Details

Hydraulic Orbital Motor Details

Tips: How to improve the hydraulic orbital motor speed?

Increasing the flow rate can increase the speed of the hydraulic orbital motor, but it will more or less affect its service life. As long as it is within its rated power range, there is no problem. If the oil pressure reaches the rated pressure, increasing the speed will exceed the power range it can withstand. But it will damage the life of the cycloid hydraulic motor.

Increasing the flow rate can only increase the speed limit, like 500 rpm to 900 rpm. It is recommended to change the model of the motor, the cycloid motor flow is increased to a certain extent, the speed will not increase uncontrollably, the internal oil pressure increases, the internal leakage increases, the efficiency drops directly, or the motor is damaged.

Product reviews
Works well
5
Anna
Avatar
10/27/2026 7:11 PM
We installed two of these orbital motors in parallel for our fishing machinery. Speed stays balanced. It handles intermittent peak pressure without sudden stalling issues.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews