Hydraulic Orbital Motor, 395cc/rev

$329.39
ATO orbital hydraulic motor is widely applied in agriculture machinery, fishing machinery, plastic industry, construction machinery, etc. It can be used in parallel or series with 395 cc/rev displacement and flat key shaft or splined shaft. Mounting flanges of 2 bolts and 4 bolts are available.
SKU: ATO-HOM-395
*
*
Free Shipping
Delivery date: 6-12 days

Favorable price hydraulic orbital motor is the design of disc distribution flow, which can provide improved performance at low speed and higher volumetric for the automatically compensated wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

ModelATO-OMP-395
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement395 cc/rev (395 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous156 rpm
Intermittent180 rpm
PressureContinuous90 ∆Bar
Intermittent100 ∆Bar
TorqueContinuous481 Nm
Intermittent525 Nm
Weight8.5kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=203mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=210mm

Details

Hydraulic Orbital Motor Details

Tips: Difference between hydraulic orbital motor and gear motor

Hydraulic orbital motors and gear motors are different in appearance, size, torque, connection mode, application places, etc., but the functions are the same, they are all for speed change, and sometimes they can be interchanged. Orbital is a form of reducer, as is gear. That is, the orbit motor has a compact appearance, small size, and a gear motor with high load resistance and durability.

Product reviews
Flange Type
5
Dixina
Avatar
8/5/2025 8:50 PM
Can I purchase a 4-bolt flange version with a splined shaft?
Was this review helpful? Yes No (0/0)
ATO Responded
You can refer to our 395cc/rev hydraulic track motor, SKU: ATO-HOM-395. You can choose a 4-bolt flange version with a splined shaft.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Favorable price hydraulic orbital motor is the design of disc distribution flow, which can provide improved performance at low speed and higher volumetric for the automatically compensated wear. It can be used on heavy vehicles and machinery in traction drive applications.

Specification

ModelATO-OMP-395
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement395 cc/rev (395 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous156 rpm
Intermittent180 rpm
PressureContinuous90 ∆Bar
Intermittent100 ∆Bar
TorqueContinuous481 Nm
Intermittent525 Nm
Weight8.5kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=203mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=210mm

Details

Hydraulic Orbital Motor Details

Tips: Difference between hydraulic orbital motor and gear motor

Hydraulic orbital motors and gear motors are different in appearance, size, torque, connection mode, application places, etc., but the functions are the same, they are all for speed change, and sometimes they can be interchanged. Orbital is a form of reducer, as is gear. That is, the orbit motor has a compact appearance, small size, and a gear motor with high load resistance and durability.

Product reviews
Flange Type
5
Dixina
Avatar
8/5/2025 8:50 PM
Can I purchase a 4-bolt flange version with a splined shaft?
Was this review helpful? Yes No (0/0)
ATO Responded
You can refer to our 395cc/rev hydraulic track motor, SKU: ATO-HOM-395. You can choose a 4-bolt flange version with a splined shaft.
Only registered users can write reviews