Hydraulic Orbital Motor, 250cc/rev

$324.59
Factory price hydraulic orbital motor with high performance shaft, can bear high pressure, high speed and high radial force. Mounting flanges of 2 bolts and 4 bolts, easy to install. 250cc/r displacement, max. speed up to 281 rpm, torque up to 378Nm, can be used in parallel or series.
SKU: ATO-HOM-250
*
*
Free Shipping
Delivery date: 6-12 days

ATO hydraulic orbital motor is widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machines, cleaners, grass cutters, winches, conveyors, slews, sweeper drives, augers, cutters, mowers and chippers.

Specification

ModelATO-OMP-250
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement250 cc/rev (250 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous235 rpm
Intermittent281 rpm
PressureContinuous100 ∆Bar
Intermittent124 ∆Bar
TorqueContinuous304 Nm
Intermittent378 Nm
Weight8kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=176mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=182mm

Details

Hydraulic Orbital Motor Details

Tips: Troubleshooting of hydraulic orbital motor

FailuresReasonsSolutions
Hydraulic orbital motor temperature is too highOverloadedLoad as required
The parts are damaged, especially the statorReplace damaged parts
Excessive noiseThe hydraulic system has airExclude the air in the system according to the operation precautions
OverspeedAdjust motor speed
Parts are damagedReplace damaged parts
Oil leakage at the shaft endDamaged or scratched sealing ringReplace the sealing ring
Dirt or water in the input end causes the shaft to rustRemove spline rust
Excessive radial loadThe radial load shall not exceed the specified value
Excessive back pressureConnect to external drain pipe
Oil leakage on both sides of the statorO ring is damagedReplace the sealing ring
Dirt or burrs on the joint surfaceDisassemble, clean and deburr
Back cover bolts are not tightTighten the bolts
Shaft does not rotateWork device stuckCheck working device
System problemCheck the system
Large radial axial loadCheck installation
Insufficient torqueThe oil temperature is too high or the oil viscosity is too lowEnhanced cooling
The motor efficiency is reduced due to the wear of the rotor or the small linkage shaftReplace worn parts
Product reviews
This orbital motor is a powerhouse!
5
Shirley0
Avatar
10/26/2025 7:43 PM
I've been using this 250cc/rev hydraulic orbital motor in my farm conveyor for months, and the high torque makes heavy loads feel effortless. It was super easy to install with the flange options, and it runs smoothly even under pressure. This motor has really improved my equipment's reliability.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO hydraulic orbital motor is widely applied in agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machines, cleaners, grass cutters, winches, conveyors, slews, sweeper drives, augers, cutters, mowers and chippers.

Specification

ModelATO-OMP-250
Shaft Type (Optional)Flat Key, Splined
Flange Type (Optional)2 Bolts, 4 Bolts
Displacement250 cc/rev (250 cm3/rev)
Working Pressure15 MPa
FlowContinuous57 LPM
Intermittent68 LPM
Max.SpeedContinuous235 rpm
Intermittent281 rpm
PressureContinuous100 ∆Bar
Intermittent124 ∆Bar
TorqueContinuous304 Nm
Intermittent378 Nm
Weight8kg

Note:

  • A simultaneous maximum torque and maximum speed are not recommended.
  • ∆Bar refers to true pressure difference between inlet port and outlet port.
  • Continuous Rating means that the motor may be run continuously at these ratings.
  • Intermittent operation refers to that the motor running time must not exceed 10% per minute under this condition.

*To assure the best orbital motor life, run it for approximately one hour at 30% of rated pressure before application to full load. Be sure this motor is filled with fluid before any load applications.

Dimensions (Unit: mm)

Dimensions of hydraulic orbital motor

L1=176mm

Hydraulic Orbital Motor Shaft (Unit: mm)

motor shafts of hydraulic orbital motor

Flange Types (Unit: mm)

2 bolt flange hydraulic orbital motor

4 bolt flange hydraulic orbital motor

L=182mm

Details

Hydraulic Orbital Motor Details

Tips: Troubleshooting of hydraulic orbital motor

FailuresReasonsSolutions
Hydraulic orbital motor temperature is too highOverloadedLoad as required
The parts are damaged, especially the statorReplace damaged parts
Excessive noiseThe hydraulic system has airExclude the air in the system according to the operation precautions
OverspeedAdjust motor speed
Parts are damagedReplace damaged parts
Oil leakage at the shaft endDamaged or scratched sealing ringReplace the sealing ring
Dirt or water in the input end causes the shaft to rustRemove spline rust
Excessive radial loadThe radial load shall not exceed the specified value
Excessive back pressureConnect to external drain pipe
Oil leakage on both sides of the statorO ring is damagedReplace the sealing ring
Dirt or burrs on the joint surfaceDisassemble, clean and deburr
Back cover bolts are not tightTighten the bolts
Shaft does not rotateWork device stuckCheck working device
System problemCheck the system
Large radial axial loadCheck installation
Insufficient torqueThe oil temperature is too high or the oil viscosity is too lowEnhanced cooling
The motor efficiency is reduced due to the wear of the rotor or the small linkage shaftReplace worn parts
Product reviews
This orbital motor is a powerhouse!
5
Shirley0
Avatar
10/26/2025 7:43 PM
I've been using this 250cc/rev hydraulic orbital motor in my farm conveyor for months, and the high torque makes heavy loads feel effortless. It was super easy to install with the flange options, and it runs smoothly even under pressure. This motor has really improved my equipment's reliability.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Hydraulic Orbital Motor, 160cc/rev

ATO-HOM-160
$321.89
Buy hydraulic orbital motor online, low speed high torque with 160cc/r displacement. It is a spool valve motor can be used in parallel or series, selectable flat key shaft or splined shaft, mounting flanges of 2 bolts and 4 bolts.

Hydraulic Orbital Motor, 200cc/rev

ATO-HOM-200
$322.89
Low speed high torque hydraulic orbital motor at affordable price. It is a spool valve motor with 200cc/r displacement, reliable operation and high efficiency, selectable flat key shaft or splined shaft, and mounting flanges of 2 bolts and 4 bolts. This orbit motor can be used in parallel or in series.