Handheld Digital Panel Meter for Load Cells

$349.56
Good price handheld digital panel meter designed for load sensors, with 2000Hz and 12800Hz sampling speed optional, accuracy up to 0.05%, support -15 ~ +15mV signal input, equipped with 4-inch color touch screen, display unit support kN/kg/lb/N/g/N-m, suitable for a variety of force measurement application scenarios.
SKU: ATO-DPM-920H
*
Free Shipping
Delivery date: 6-12 days

The high performance handheld digital panel meter integrates a number of intelligent features, automatic calibration and recognition of TEDS sensor parameters, real-time capture of peaks and valleys, high-speed sampling rate of 2000Hz, high-speed sampling rate up to 12800Hz. support for wireless calibration, a key to restore the settings. It supports wireless calibration and key restoration settings. It has a wide display range from -99999 to 999999, and provides multiple alarm modes to meet the needs of complex on-site force measurement.

Specifications

ModelATO-DY920-HATO-DY920-J
Sampling RateHigh speed version 2000HzExtreme version 12800Hz (six speeds selectable)
RangeUnlimited external sensor range
Accuracy0.1%0.05%
Resolution0.01%
Display Bits5 digit (including decimal point)6 digit (including decimal point)
Display UnitkN/kg/lb/N/g/N-m
Housing MaterialAluminum alloy
Non-linearMeter better than 0.01%
Display Division-99999 ~ 9999999
Signal Input-15~+15mV
Display4-inch color electric touch display
Temperature DriftLess than 20ppm
Built-in Battery3200mAh battery, full battery life of 10 hours of continuous operation, low battery reminder
Sampling Rate Adjustment50Hz~12800Hz Six adjustable levels
Display InterfaceReal-time curve, historical curve/table, peak and valley value display, switchable video screen
Real-time MonitoringAutomatically capture peaks and valleys, analyze sensor status
Setting ParametersBackup and restore, one-key restore
Wireless CalibrationSimply enter the sensor parameters to complete the calibration
Smart SensorAutomatic calibration and modification of the corresponding units and decimal points (TEDS Smart Sensor)
Connecting CablesUse TYPE-C cable (optional RS485) to connect directly with PC to export simulation data.
Interface Test InterfaceView self-eye, wireless communication test data
Data SavingPeak and valley value history data save 200 groups, power down not lost
Alarm ModePeak alarm, lower limit alarm, peak and valley value alarm, over-range network letter self-test alarm
Capture ModeThreshold-Threshold, Threshold-Time, Threshold-Keypad


Dimension (unit: mm)

Handheld digital panel meter dimension

Details

Handheld digital panel meter detail

Wiring Diagram

Handheld digital panel meter wiring diagram

Sampling Speed

Handheld digital panel meter sampling speed

The higher the sampling speed, the closer the measured value is to the actual value. ATO digital panel meter adopts high-performance acquisition chip, the acquisition speed can reach 12800Hz.

Application

Handheld digital panel meter application

Tips: Handheld digital panel meter features

  • Handheld digital panel meter sampling rate of 50Hz to 12800Hz six adjustable, high sampling rate to capture the peak more accurately.
  • Real-time curve and the last historical curve selection display, view the working process of the force situation.
  • Real-time automatically capture the peak and valley values of the equipment, analyze the status of the sensor.
  • Parameter backup and recovery, modify the parameters can also be restored with one key.
  • No weight calibration, just enter the sensor parameters to complete the calibration.
  • Digital panel meter using TEDS intelligent sensor, power on automatic calibration, modify the corresponding unit and decimal point low battery when the meter interface shows low battery logo, plug in the charger shows charging logo, charging light indicator.
  • Use TYPE-C cable (optional RS485) to connect directly with the PC for Modbus communication, easy to export force data.
  • Multiple alarm options, upper limit alarm, lower limit alarm, peak/valley alarm, 1.2 times over-range automatic alarm.
Product reviews
Compatibility
5
Theron
Avatar
11/13/2025 11:51 PM
Hello, I'm researching the ATO-TQS-S04 torque sensor and would like to know if it's compatible with the ATO-DPM-920H.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the ATO-TQS-S04 torque sensor can work with the ATO-DPM-920H.
Compatible Devices
5
Obinna
Avatar
1/27/2026 11:17 PM
Hello, is the 2000Hz digital handheld panel meter (ATO-DPM-920H) compatible with the load cell (ATO-LC-S05)? Is the connection easy? Is it suitable for testing the breaking strength of paraglider lines weighing from 1kg to 600kg?
Was this review helpful? Yes No (0/0)
ATO Responded
The digital handheld panel meter (ATO-DPM-920H) is compatible with the load cell (ATO-LC-S05) and the connection is simple. However, it is not suitable for your testing environment.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The high performance handheld digital panel meter integrates a number of intelligent features, automatic calibration and recognition of TEDS sensor parameters, real-time capture of peaks and valleys, high-speed sampling rate of 2000Hz, high-speed sampling rate up to 12800Hz. support for wireless calibration, a key to restore the settings. It supports wireless calibration and key restoration settings. It has a wide display range from -99999 to 999999, and provides multiple alarm modes to meet the needs of complex on-site force measurement.

Specifications

ModelATO-DY920-HATO-DY920-J
Sampling RateHigh speed version 2000HzExtreme version 12800Hz (six speeds selectable)
RangeUnlimited external sensor range
Accuracy0.1%0.05%
Resolution0.01%
Display Bits5 digit (including decimal point)6 digit (including decimal point)
Display UnitkN/kg/lb/N/g/N-m
Housing MaterialAluminum alloy
Non-linearMeter better than 0.01%
Display Division-99999 ~ 9999999
Signal Input-15~+15mV
Display4-inch color electric touch display
Temperature DriftLess than 20ppm
Built-in Battery3200mAh battery, full battery life of 10 hours of continuous operation, low battery reminder
Sampling Rate Adjustment50Hz~12800Hz Six adjustable levels
Display InterfaceReal-time curve, historical curve/table, peak and valley value display, switchable video screen
Real-time MonitoringAutomatically capture peaks and valleys, analyze sensor status
Setting ParametersBackup and restore, one-key restore
Wireless CalibrationSimply enter the sensor parameters to complete the calibration
Smart SensorAutomatic calibration and modification of the corresponding units and decimal points (TEDS Smart Sensor)
Connecting CablesUse TYPE-C cable (optional RS485) to connect directly with PC to export simulation data.
Interface Test InterfaceView self-eye, wireless communication test data
Data SavingPeak and valley value history data save 200 groups, power down not lost
Alarm ModePeak alarm, lower limit alarm, peak and valley value alarm, over-range network letter self-test alarm
Capture ModeThreshold-Threshold, Threshold-Time, Threshold-Keypad


Dimension (unit: mm)

Handheld digital panel meter dimension

Details

Handheld digital panel meter detail

Wiring Diagram

Handheld digital panel meter wiring diagram

Sampling Speed

Handheld digital panel meter sampling speed

The higher the sampling speed, the closer the measured value is to the actual value. ATO digital panel meter adopts high-performance acquisition chip, the acquisition speed can reach 12800Hz.

Application

Handheld digital panel meter application

Tips: Handheld digital panel meter features

  • Handheld digital panel meter sampling rate of 50Hz to 12800Hz six adjustable, high sampling rate to capture the peak more accurately.
  • Real-time curve and the last historical curve selection display, view the working process of the force situation.
  • Real-time automatically capture the peak and valley values of the equipment, analyze the status of the sensor.
  • Parameter backup and recovery, modify the parameters can also be restored with one key.
  • No weight calibration, just enter the sensor parameters to complete the calibration.
  • Digital panel meter using TEDS intelligent sensor, power on automatic calibration, modify the corresponding unit and decimal point low battery when the meter interface shows low battery logo, plug in the charger shows charging logo, charging light indicator.
  • Use TYPE-C cable (optional RS485) to connect directly with the PC for Modbus communication, easy to export force data.
  • Multiple alarm options, upper limit alarm, lower limit alarm, peak/valley alarm, 1.2 times over-range automatic alarm.
Product reviews
Compatibility
5
Theron
Avatar
11/13/2025 11:51 PM
Hello, I'm researching the ATO-TQS-S04 torque sensor and would like to know if it's compatible with the ATO-DPM-920H.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the ATO-TQS-S04 torque sensor can work with the ATO-DPM-920H.
Compatible Devices
5
Obinna
Avatar
1/27/2026 11:17 PM
Hello, is the 2000Hz digital handheld panel meter (ATO-DPM-920H) compatible with the load cell (ATO-LC-S05)? Is the connection easy? Is it suitable for testing the breaking strength of paraglider lines weighing from 1kg to 600kg?
Was this review helpful? Yes No (0/0)
ATO Responded
The digital handheld panel meter (ATO-DPM-920H) is compatible with the load cell (ATO-LC-S05) and the connection is simple. However, it is not suitable for your testing environment.
Only registered users can write reviews
Customers who bought this item also bought

Reaction Torque Sensor, Flange to Square Drive, 2/10/30/50/100/200 Nm

ATO-TQS-S03
$134.92
Torque sensor is a strain gauge sensor for static torque measurement or torque wrench calibration. It can measure both forward and reverse torque. Static torque sensor has one end of flange and the other end of square drive. Reaction torque sensors have a capacity range of 2/10/30/50/100/200 Nm.

Ring Load Cell, Through Hole, 50kg/200kg/500kg to 5000kg

ATO-LC-1003
$259.63
Through hole ring design, the ring load cell has a strong load capacity and is suitable for weighing tasks from 0-50kg/200kg/500kg to 5000kg. Fully sealed alloy steel construction for long-lasting operation in complex industrial environments.