3 Phase AC Digital Panel Volt Meter

$426.25
Favorable price digital panel volt meter can measure 3 phase voltage AC 380V in three phase electric network with high accuracy, LED display, selectable different panel size.
SKU: ATO-PANEL-VM
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

High performance digital panel voltmeter is suitable for the measurement of the three phase voltage parameters of the power distribution system. This panel meter has programmable ratios, supports analog output and communication functions, and can directly replace analog pointer volt meters.

Specification

ModelATO-PZ194U-□X4/□k4
Level of Accuracy (Optional)0.5 Level, 0.2 Level
DisplayLED Display
Display Data Refresh Frequency1s
Input CharacteristicsVoltageRated ValueAC 380V
OverloadDuration: 1.2Un, Instantaneous: 20Un/1min
Frequency45 ~ 65Hz
Auxiliary PowerWorking ScopeAC 80 ~ 270V (50/60Hz), DC 80 ~ 270V, DC 24V/48V
Power Consumption≤5VA
Switch InputDry Contact Mode
Relay OutputContact Capacity (Resistive): AC 5A/250V, DC 5A/30V
Analog Output (Optional)N/A or 4-20mA, Load ≤350Ω
Communication (Optional)N/A or 1 Channel Modbus-RTU Protocol
Wiring (Optional)3 Phase 4 Wire (Default) or 3 Phase 3 Wire
Protection GradeFront Panel IP64, Rear Panel IP20
Working Temperature-40℃ ~ 70℃ (LED)
Relative Humidity-40℃ ~ 85℃ (LED)
Absolute AbilityPower Supply, Input, Output≥AC2KV
Altitude≤2500m

Dimensions (Unit: mm)

Dimensions of Digital Ampere Meter

TypePanel Size
(A1 x A2)
Installation Size
(a1 x a2)
Cut-out Size
(L1 x L2)
Installation Depth
(D1)
Panel Thickness
(D2)
Installation Screen Thickness
(D3 max)
Reserved Size
Horizontal
(X)
Vertical
(Y)
Type 2120 x 120110 x 110111 x 11155.5/761551020
Type 383 x 8375 x 7576 x 767512.551020
Type 596 x 4890 x 4391 x 4468.5/8210.5104020
Type 996 x 9690 x 9091 x 9175/9813.5104020
Type A74 x 7466 x 6667 x 6775/9012.551020
Type D48 x 4844.5 x 44.545 x 45899.554020

Tips for using the digital panel volt meter

  1. Before use, the digital panel volt meter needs to be powered on for 15 minutes.
  2. Pay attention to prevent vibration and impact, and do not use this meter in places with excessive dust and excessive harmful gases.
  3. The input wire should not be too long. If the input terminal of the signal under test is long, please try a twisted-pair shielded wire.
  4. If the signal is accompanied by high frequency interference, you should try the low frequency filter online.
  5. When it is stored for a long time and not in use, please turn on the power once every three months for not less than 4 hours.
  6. For long-term storage, avoid direct light, and should be stored at an ambient temperature of -25°C ~ 55°C.
  7. If there is no display on the digital panel voltmeter, first check the auxiliary power supply and whether the voltage is within the range.
  8. If the display is abnormal, check whether the input signal is normal and whether the signal terminal is tightened.
  9. Unless the PT has enough power, the PT signal cannot be used as an auxiliary power source at the same time to ensure the normal operation of the instrument.
  10. The current terminal screws in the CT circuit must be tightened to ensure reliable contact between incoming and outgoing wires to avoid malfunctions.
  11. If you want to calibrate the voltmeter, the calibration instrument should be better than 0.1 level to ensure calibration accuracy.
Product reviews
High-quality 3-phase AC digital panel voltmeter
5
Velaz
Avatar
1/9/2022 7:18 PM
I like this 3 phase AC digital panel voltmeter very much. It works very well. If you use it, you will love it. I recommend everyone to buy it.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High performance digital panel voltmeter is suitable for the measurement of the three phase voltage parameters of the power distribution system. This panel meter has programmable ratios, supports analog output and communication functions, and can directly replace analog pointer volt meters.

Specification

ModelATO-PZ194U-□X4/□k4
Level of Accuracy (Optional)0.5 Level, 0.2 Level
DisplayLED Display
Display Data Refresh Frequency1s
Input CharacteristicsVoltageRated ValueAC 380V
OverloadDuration: 1.2Un, Instantaneous: 20Un/1min
Frequency45 ~ 65Hz
Auxiliary PowerWorking ScopeAC 80 ~ 270V (50/60Hz), DC 80 ~ 270V, DC 24V/48V
Power Consumption≤5VA
Switch InputDry Contact Mode
Relay OutputContact Capacity (Resistive): AC 5A/250V, DC 5A/30V
Analog Output (Optional)N/A or 4-20mA, Load ≤350Ω
Communication (Optional)N/A or 1 Channel Modbus-RTU Protocol
Wiring (Optional)3 Phase 4 Wire (Default) or 3 Phase 3 Wire
Protection GradeFront Panel IP64, Rear Panel IP20
Working Temperature-40℃ ~ 70℃ (LED)
Relative Humidity-40℃ ~ 85℃ (LED)
Absolute AbilityPower Supply, Input, Output≥AC2KV
Altitude≤2500m

Dimensions (Unit: mm)

Dimensions of Digital Ampere Meter

TypePanel Size
(A1 x A2)
Installation Size
(a1 x a2)
Cut-out Size
(L1 x L2)
Installation Depth
(D1)
Panel Thickness
(D2)
Installation Screen Thickness
(D3 max)
Reserved Size
Horizontal
(X)
Vertical
(Y)
Type 2120 x 120110 x 110111 x 11155.5/761551020
Type 383 x 8375 x 7576 x 767512.551020
Type 596 x 4890 x 4391 x 4468.5/8210.5104020
Type 996 x 9690 x 9091 x 9175/9813.5104020
Type A74 x 7466 x 6667 x 6775/9012.551020
Type D48 x 4844.5 x 44.545 x 45899.554020

Tips for using the digital panel volt meter

  1. Before use, the digital panel volt meter needs to be powered on for 15 minutes.
  2. Pay attention to prevent vibration and impact, and do not use this meter in places with excessive dust and excessive harmful gases.
  3. The input wire should not be too long. If the input terminal of the signal under test is long, please try a twisted-pair shielded wire.
  4. If the signal is accompanied by high frequency interference, you should try the low frequency filter online.
  5. When it is stored for a long time and not in use, please turn on the power once every three months for not less than 4 hours.
  6. For long-term storage, avoid direct light, and should be stored at an ambient temperature of -25°C ~ 55°C.
  7. If there is no display on the digital panel voltmeter, first check the auxiliary power supply and whether the voltage is within the range.
  8. If the display is abnormal, check whether the input signal is normal and whether the signal terminal is tightened.
  9. Unless the PT has enough power, the PT signal cannot be used as an auxiliary power source at the same time to ensure the normal operation of the instrument.
  10. The current terminal screws in the CT circuit must be tightened to ensure reliable contact between incoming and outgoing wires to avoid malfunctions.
  11. If you want to calibrate the voltmeter, the calibration instrument should be better than 0.1 level to ensure calibration accuracy.
Product reviews
High-quality 3-phase AC digital panel voltmeter
5
Velaz
Avatar
1/9/2022 7:18 PM
I like this 3 phase AC digital panel voltmeter very much. It works very well. If you use it, you will love it. I recommend everyone to buy it.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

3 Phase AC Digital Ampere Meter

ATO-PANEL-AM
$612.39
Digital display panel ampere meter with LED display can measure 3 phase AC current 1A or 5A in three phase electric network with high accuracy, monitor analog input and switch input, and different panel size for your choices.