Digital Panel Meter for Potentiometers 5 Digit

$226.15
Single channel digital panel meter can cooperate with displacement sensors, linear position sensors, potentiometers, etc. 16-bit A/D converter, zero clearing at any time.
SKU: ATO-DPM-DS5D
Free Shipping
Delivery date: 6-12 days

Intelligent digital panel meter has adjustment and digital filtering function. Digital display controller can help to reduce errors of the sensor and the transmitter, effectively improve the system measurement accuracy and control accuracy.

Specification:

BasicsModelATO-DPM5
DimensionA 160*80*125mm horizontal, hole size 152*76;
B 96*96*112mm, hole size 92*92;
C 96*48*112mm horizontal, hole size 92*45.
Shipping weight2 kg
Technical parametersDisplay-19999~99999
Measurement accuracy0.05%
Measuring speed10 times/second
Display method5 digit LED display
Instrument power supply100-240VAC, 50/60Hz; 10-24VDC
Input signalDC current 4-20mA, 0-20mA, 0-10mA; DC voltage 0-5v; DC voltage 0-10V; Signal of mV; Potentiometer (500Ω-20KΩ).
Contact input (optional)External switch input for clearing
Alarm (4 kinds can be Selected)J0(no alarm), J1-J4 (1-4 kinds), J3 and J4 just for dimension A, B
Transmission (optional)B0 no output;
B1 current output (4-20mA), (0-10mA), (0-20mA);
B2 voltage output (0-5V), (1-5V);
B3 voltage output (0-10V).
External power supply (optional)W0 no power;
W1 24V DC;
W2 12V DC;
W3 10V precision power supply.
Communication (optional)T1 TC ASCII protocol RS232;
T2 TC ASCII protocol RS485;
T3 Modbus-RTU protocol RS232;
T4 Modbus-RTU protocol RS485.
Print function (optional)Print

Note: The optional functions are not necessary, can be selected according to your need. Communication and transmission can't be compatible at the same time.

Tips: Steps for installing digital panel meter in the field

  1. Install sensor: It is necessary to adjust the sensor installation correspondingly under the assistance of the field staff and according to the condition of the site. There is a need for horizontal installation and also a need for bottom-up installation. All gaskets should be in the required position. The situation of squeezing film and improper sealing should not occur.
  2. Wiring: Connect all sensors with digital panel meter correctly. The signal should be outputted and received correctly. Besides, the data of digital panel meter and sensors should be one-to-one correspondence.
  3. Debugging: All the pressure and liquid level transmitter should adjust to zero, reset parameters. In order to ensure the display of the digital panel meter in line with sensors. The upper and lower alarm value should be set according to the requirements of the site and connected to the PLC.
  4. Site validation: In the field inject required medium into the storage tank. The numerical value of the digital panel meter should be corresponded with the actual one. There should be no leakage in the installation place of the sensor and the temperature is displayed correctly.

In this video, ATO will show you how to set the basic parameters of digital panel meter, and how to connect a digital panel meter and a displacement sensor to form a simple displacement measuring system.

Temperature Controller Wiring and Settings

In this video, ATO will show you how to connect a temperature controller with a thermocouple or RTD sensor, and how to set the basic parameters of the temperature controller.

Load Cell Controller Setup and Calibration

In this video, we select an S-type load cell and a 2kg standard weight to complete the setup and calibration. Finally, ATO also shows you how to set the tare value and measure the tare weight.

Product reviews
Good 5-digit digital panel meter
5
Bahama
Avatar
12/5/2021 8:22 PM
If you want to know how much current and voltage you use, this is a perfect 5-digit digital panel meter. The installation steps on the page are very detailed and easy to install. It is highly recommended.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Intelligent digital panel meter has adjustment and digital filtering function. Digital display controller can help to reduce errors of the sensor and the transmitter, effectively improve the system measurement accuracy and control accuracy.

Specification:

BasicsModelATO-DPM5
DimensionA 160*80*125mm horizontal, hole size 152*76;
B 96*96*112mm, hole size 92*92;
C 96*48*112mm horizontal, hole size 92*45.
Shipping weight2 kg
Technical parametersDisplay-19999~99999
Measurement accuracy0.05%
Measuring speed10 times/second
Display method5 digit LED display
Instrument power supply100-240VAC, 50/60Hz; 10-24VDC
Input signalDC current 4-20mA, 0-20mA, 0-10mA; DC voltage 0-5v; DC voltage 0-10V; Signal of mV; Potentiometer (500Ω-20KΩ).
Contact input (optional)External switch input for clearing
Alarm (4 kinds can be Selected)J0(no alarm), J1-J4 (1-4 kinds), J3 and J4 just for dimension A, B
Transmission (optional)B0 no output;
B1 current output (4-20mA), (0-10mA), (0-20mA);
B2 voltage output (0-5V), (1-5V);
B3 voltage output (0-10V).
External power supply (optional)W0 no power;
W1 24V DC;
W2 12V DC;
W3 10V precision power supply.
Communication (optional)T1 TC ASCII protocol RS232;
T2 TC ASCII protocol RS485;
T3 Modbus-RTU protocol RS232;
T4 Modbus-RTU protocol RS485.
Print function (optional)Print

Note: The optional functions are not necessary, can be selected according to your need. Communication and transmission can't be compatible at the same time.

Tips: Steps for installing digital panel meter in the field

  1. Install sensor: It is necessary to adjust the sensor installation correspondingly under the assistance of the field staff and according to the condition of the site. There is a need for horizontal installation and also a need for bottom-up installation. All gaskets should be in the required position. The situation of squeezing film and improper sealing should not occur.
  2. Wiring: Connect all sensors with digital panel meter correctly. The signal should be outputted and received correctly. Besides, the data of digital panel meter and sensors should be one-to-one correspondence.
  3. Debugging: All the pressure and liquid level transmitter should adjust to zero, reset parameters. In order to ensure the display of the digital panel meter in line with sensors. The upper and lower alarm value should be set according to the requirements of the site and connected to the PLC.
  4. Site validation: In the field inject required medium into the storage tank. The numerical value of the digital panel meter should be corresponded with the actual one. There should be no leakage in the installation place of the sensor and the temperature is displayed correctly.
Product reviews
Good 5-digit digital panel meter
5
Bahama
Avatar
12/5/2021 8:22 PM
If you want to know how much current and voltage you use, this is a perfect 5-digit digital panel meter. The installation steps on the page are very detailed and easy to install. It is highly recommended.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

DC Current Sensor 50A/100A/200A/500A/1000A to 1500A

ATO-CUS-DC1500
$83.25
Hall effect DC current sensors are open loop current sensors, with split-core structure, 1ms fast response time, 1.0%FS accuracy, 4-20mA output signal, 12V/24V power supply, fixed installation, excellent linearity and strong anti-interference capacity. DC current sensors are widely used for DC current monitoring, system signal acquisition and feedback control.