Ring Load Cell, Through Hole, 50kg/200kg/500kg to 5000kg

$259.63
Through hole ring design, the ring load cell has a strong load capacity and is suitable for weighing tasks from 0-50kg/200kg/500kg to 5000kg. Fully sealed alloy steel construction for long-lasting operation in complex industrial environments.
SKU: ATO-LC-1003
*
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

ATO's high performance ring load cells are sold to meet different weighing needs from 0- 50/200/300/500/1000/3000/5000kg and stand out for their excellent performance and reliability. The load cells have a rated output of 2.0±10% mV/V with extremely low linearity error and temperature drift for precision measurements. 3 meter rugged cable design with 10kg end pull ensures stable operation for long periods of time.

Specification

ModelATO-DYHX-003
Capacity Rang0-50/200/300/500/1000/3000/5000kg (optional)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Rated Output2.0±10%mV/V
Zero Balance±2%F.S.
Non-Linearity0.5%F.S.
Hysteresis0.3%F.S.
Repeatability0.3%F.S.
Creep0.1%F.S. (30min)
Temp Effect on Output0.05%F.S./10°C
Temp Effect on Zero0.05%F.S./10°C
Response frequency10kHz
MaterialAlloy steel
Impedance1400Ω
Insulation≥5000MΩ/100VDC
Working Voltage5-10V
Operating Temp Range-20°C~80°C
Safe Overload1.2
Maximum Overload1.5
Cable SpecificationsΦ5*3m
Cable Ultimate Pull10kg


Dimension (unit: mm)

Ring load cell size

Details

Ring load cell detail

  1. Solid Body of Load Cell: Made of 40Cr alloy steel material, strong resistance to mechanical fatigue and good hardenability.
  2. High Quality OD Wire: 5.6mm OD wire, stable signal and strong anti-interference.
  3. High-performance Material: Brass nickel-plated reinforced made of waterproof connector.
  4. 6 Angle Waterproof Connector: Load cell connector with spring, which can effectively buffer and prevent the wire from pulling and breaking.

Load Cell Force Diagram

Ring load cell force diagram

Wiring Drawing

Ring load cell wiring drawing

Note: This is the pressure wiring of the load cell, such as the measurement of tensile force need to be the definition of the green wire and white wire wiring alignment.

Tips: Ring load cell basics

A ring load cell senses the small deformations generated by a load through an internal strain gauge and converts them into an electrical signal. When measuring force, the ring design ensures that the force is evenly distributed across the surface of the transducer, thus increasing the accuracy of the measurement. This type of load cell is typically used to measure tensile force or pressure and is suitable for applications in compact spaces.

The ring load cell is widely used in industrial automation, robotics, machine building, aerospace, and other fields. Common uses include bolt preload measurement, tension monitoring, pressure testing, and structural load analysis. Their toroidal design makes them particularly suitable for installation in scenarios where shafts or cables need to be routed, such as the measurement of shaft forces in hydraulic cylinders.

Care should be taken when using load cells: firstly, ensure that the load cell's rated load range matches the actual application requirements to avoid overload damage. Second, install the force in the same direction as the sensor design to avoid tilting the load. Finally, calibrate the sensor periodically to ensure measurement accuracy. To extend the service life, avoid long-term exposure of the sensor to high temperature, high humidity or corrosive environment.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

Product reviews
Resolution of Load Cell
5
Agger
Avatar
4/1/2025 7:30 PM
I would like information on the resolution of the ring load cell which is suitable for the 0-50 kg range. What is the minimum mass value that the load cell detects and changes state? Are these values in grams or kilograms?
Was this review helpful? Yes No (0/0)
ATO Responded
The resolution of the ring load cell is 0.3% of the range, and the resolution is 150 grams for the 0-50 kg range, and the minimum detectable weight is 150 grams.
Measuring the weight of a box
5
Vien
Avatar
5/11/2025 9:07 PM
We need to lift and move the box. When we lift the box, we stop to get the steady weight of the item. After that, we move the box to the destination, and what I am looking for is the maximum torque value that this load cell can withstand.
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, we need to confirm the range of the ATO-LC-1003 sensor you selected.
Resolution of the sensor
4
Wesin
Avatar
7/14/2025 12:14 AM
Can you tell me what the resolution of this weighing sensor is?
Was this review helpful? Yes No (0/0)
ATO Responded
The accuracy of the ATO-LC-1003 sensor is 3/1000 of the range.
Compression and Tension
5
Wento
Avatar
10/19/2025 8:26 PM
Can this load cell be used for both compression and tension testing?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the ATO-LC-1003 load cell can be used for both compression and tension testing.
Usage Instructions
5
Tosco
Avatar
4/22/2026 8:05 PM
We recently purchased your ATO-DYHX-003 500N load cell and ATO-DPM-DY800 display controller. We received the products today, but it seems we need a 24VDC power supply to power the display controller, and we also need to splice the load cell cables before connecting them to the display controller?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this display does indeed require a 24V DC power supply before connecting the load cell to the display controller.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

ATO's high performance ring load cells are sold to meet different weighing needs from 0- 50/200/300/500/1000/3000/5000kg and stand out for their excellent performance and reliability. The load cells have a rated output of 2.0±10% mV/V with extremely low linearity error and temperature drift for precision measurements. 3 meter rugged cable design with 10kg end pull ensures stable operation for long periods of time.

Specification

ModelATO-DYHX-003
Capacity Rang0-50/200/300/500/1000/3000/5000kg (optional)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Rated Output2.0±10%mV/V
Zero Balance±2%F.S.
Non-Linearity0.5%F.S.
Hysteresis0.3%F.S.
Repeatability0.3%F.S.
Creep0.1%F.S. (30min)
Temp Effect on Output0.05%F.S./10°C
Temp Effect on Zero0.05%F.S./10°C
Response frequency10kHz
MaterialAlloy steel
Impedance1400Ω
Insulation≥5000MΩ/100VDC
Working Voltage5-10V
Operating Temp Range-20°C~80°C
Safe Overload1.2
Maximum Overload1.5
Cable SpecificationsΦ5*3m
Cable Ultimate Pull10kg


Dimension (unit: mm)

Ring load cell size

Details

Ring load cell detail

  1. Solid Body of Load Cell: Made of 40Cr alloy steel material, strong resistance to mechanical fatigue and good hardenability.
  2. High Quality OD Wire: 5.6mm OD wire, stable signal and strong anti-interference.
  3. High-performance Material: Brass nickel-plated reinforced made of waterproof connector.
  4. 6 Angle Waterproof Connector: Load cell connector with spring, which can effectively buffer and prevent the wire from pulling and breaking.

Load Cell Force Diagram

Ring load cell force diagram

Wiring Drawing

Ring load cell wiring drawing

Note: This is the pressure wiring of the load cell, such as the measurement of tensile force need to be the definition of the green wire and white wire wiring alignment.

Tips: Ring load cell basics

A ring load cell senses the small deformations generated by a load through an internal strain gauge and converts them into an electrical signal. When measuring force, the ring design ensures that the force is evenly distributed across the surface of the transducer, thus increasing the accuracy of the measurement. This type of load cell is typically used to measure tensile force or pressure and is suitable for applications in compact spaces.

The ring load cell is widely used in industrial automation, robotics, machine building, aerospace, and other fields. Common uses include bolt preload measurement, tension monitoring, pressure testing, and structural load analysis. Their toroidal design makes them particularly suitable for installation in scenarios where shafts or cables need to be routed, such as the measurement of shaft forces in hydraulic cylinders.

Care should be taken when using load cells: firstly, ensure that the load cell's rated load range matches the actual application requirements to avoid overload damage. Second, install the force in the same direction as the sensor design to avoid tilting the load. Finally, calibrate the sensor periodically to ensure measurement accuracy. To extend the service life, avoid long-term exposure of the sensor to high temperature, high humidity or corrosive environment.

Product reviews
Resolution of Load Cell
5
Agger
Avatar
4/1/2025 7:30 PM
I would like information on the resolution of the ring load cell which is suitable for the 0-50 kg range. What is the minimum mass value that the load cell detects and changes state? Are these values in grams or kilograms?
Was this review helpful? Yes No (0/0)
ATO Responded
The resolution of the ring load cell is 0.3% of the range, and the resolution is 150 grams for the 0-50 kg range, and the minimum detectable weight is 150 grams.
Measuring the weight of a box
5
Vien
Avatar
5/11/2025 9:07 PM
We need to lift and move the box. When we lift the box, we stop to get the steady weight of the item. After that, we move the box to the destination, and what I am looking for is the maximum torque value that this load cell can withstand.
Was this review helpful? Yes No (0/0)
ATO Responded
Hello, we need to confirm the range of the ATO-LC-1003 sensor you selected.
Resolution of the sensor
4
Wesin
Avatar
7/14/2025 12:14 AM
Can you tell me what the resolution of this weighing sensor is?
Was this review helpful? Yes No (0/0)
ATO Responded
The accuracy of the ATO-LC-1003 sensor is 3/1000 of the range.
Compression and Tension
5
Wento
Avatar
10/19/2025 8:26 PM
Can this load cell be used for both compression and tension testing?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the ATO-LC-1003 load cell can be used for both compression and tension testing.
Usage Instructions
5
Tosco
Avatar
4/22/2026 8:05 PM
We recently purchased your ATO-DYHX-003 500N load cell and ATO-DPM-DY800 display controller. We received the products today, but it seems we need a 24VDC power supply to power the display controller, and we also need to splice the load cell cables before connecting them to the display controller?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this display does indeed require a 24V DC power supply before connecting the load cell to the display controller.
Only registered users can write reviews
Customers who bought this item also bought

Micro Load Cell, S Type, 5N/500N/1000N, 1kg/10kg/30kg/200kg

ATO-LC-S04
$177.78
S type micro load cell can bear both tension and pressure, with small size 5*16*19.1mm, good stability, good output symmetry, high accuracy, low temperature drift, compact structure and overload protection. Micro load cell is suited to use in restricted spaces such as manipulator and robot, and specifically used for button tester and force gauge.

6 Digit Display Controller for Load Cells

ATO-DPM-DY800
$327.09
6 digit display controller can be used with load cells, force sensors and weighing sensors, 4-20mA or 0-10V transmitting signal output. This digital panel meter can display gross, net, peak and valley value alternately. Software with RS485 communication cable allows you to log the data on a PC.

Handheld Digital Panel Meter for Load Cells

ATO-DPM-920H
$349.56
Good price handheld digital panel meter designed for load sensors, with 2000Hz and 12800Hz sampling speed optional, accuracy up to 0.05%, support -15 ~ +15mV signal input, equipped with 4-inch color touch screen, display unit support kN/kg/lb/N/g/N-m, suitable for a variety of force measurement application scenarios.

Strain Gauge Load Cell, S type, 5kg/20kg/30kg/500kg to 7 ton

ATO-LC-S02
$82.59
S type load cell can bear both tension and pressure, with overload protection device, good output symmetry, high accuracy, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, electronic-mechanical scale, crane scales, automatic weighing instrument and other force value measurement and control.