Handheld Carbon Monoxide (CO) Gas Detector, 0 to 500/1000/2000 ppm

$398.76
Handheld carbon monoxide (CO) detector use high accuracy sensor, pump suction type, selectable measuring range of 0 to 500 ppm, 0 to 1000 ppm, 0 to 2000 ppm, gas leak alarm with audible, visual and vibrating, compact size and light weight, long working time, easy to carry and operation.
SKU: GD200-CO
*
*
*
Free Shipping
Delivery date: 6-12 days

Features

  • LCD dot matrix display, direct readout of gas type, unit, concentration, local time, etc.
  • Support English/Chinese operation, easy to shift.
  • Gas concentration unit PPM and mg/m3 can be shift quickly.
  • Built-in micro-sampling pump, 10 grades of suction are available.
  • Explosion-proof certification

Gas Detector Functions

  • With self-calibration and zero calibration functions, makes the detection more accurate and reliable.
  • One key to restore factory setting, free from maloperation.
  • With temperature and pressure compensation, able to realize the compensation for the gas concentration under different temperature and pressure environments.
  • Two-stage alarm with sound and light, and alarm point is settable.
  • Rechargeable lithiumpolymer battery with large capacity.
  • High-strength special engineering plastic housing, with anti-slip, waterproof, dustproof and explosion-proof.

Specification

ModelGD200-CO
Sampling MethodPump type, flow rate can be up to 750ml/min
Detection PrincipleElectrochemistry
Range (Optional)*0 to 10ppm, 0 to 20ppm, 0 to 50ppm, 0 to 100ppm, 0 to 500ppm, 0 to 1000ppm, 0 to 2000ppm, 0 to 5000ppm, 0 to 10000ppm
Resolution0.001ppm (0-10/20/50ppm), 0.01ppm (0-100ppm) or 1ppm (0-500/1000/2000/5000/10000ppm)
Accuracy≤±3% F.S.
Response Time≤10s
Repeatability≤±1%
Recovery Time≤10s
Linearity Error≤±1%
Zero Shift≤±1% (F.S./year)
Data Logging (Optional Function)High speed data transmission by USB, available for data downloading and printing (The built-in IC card has about 2G memory, which can record 100,000 sets of data.)
AlarmsSound, light and vibration
DisplayLCD dot matrix display
LanguageChinese/English
Battery3.7V rechargeable lithium battery, 3.7 Watt (Charger included: Input AC 100-240V 50/60Hz with optional USA, Europe or UK plug)
Operating Time100h (Pump off)
Explosion-proof GradeII 1G Ex da ia IIC T4 Ga
Case MaterialABS+PC
Protection GradeIP66
CertificationCE, ATEX (Standard: EN IEC 60079-0:2018, EN 60079-1:2014)
Operating Temperature-20℃~50℃
Operating Humidity0~95%RH (non-condensing)
Operating Pressure0.8~1.2bar
Dimension205*75*32mm
Weight300g
Warranty12 months
Extension ProbeAbout 480mm (Total Length), About 300mm (Probe Head)
Accessories (Optional)Calibration kit - gas pressure regulator (calibration gas cylinder NOT included)
  • Body Material: Brass
  • Max. Input Pressure: ≤15MPa
  • Max. Output Pressure: 0.25MPa
  • Flowmeter Range: 0.1-1.5 L/min
  • Mounting Connection: Inlet port: W21.8-14; Outlet port: Ф6 flexible tube

Note 1:

  • If you require a CO gas detector with a measuring range not listed in the table above, please contact us with details about your operating environment. We can help you choose the right detector for your application.

  • We also offer gas detectors for other common gases. Please refer to the ATO Gas Detector Catalog for available gas types and measuring ranges.

Note 2:

Regarding the flow rate for gas detectors, there are 2 types:

  • Pump-Suction Type: Equipped with a built-in pump, with a flow rate of 600 mL/min. (Models: GD200, GD400, GD600)
  • Diffusion Type: Not equipped with a built-in pump, with a flow rate of 300 mL/min. (Models: GD300, GD500, GD800)

If you require a customized flow rate, please let us know your specific requirements. We will evaluate whether customization is possible. A flow rate that is too high or too low can affect measurement accuracy, so we recommend using an appropriate flow rate for your application.

Flow rate only needs to be considered when sampling gas from pipelines. For measuring gas concentrations in normal ambient air, you do not need to consider the flow rate. To measure confined spaces such as pipelines, please get in touch with us and provide the detailed conditions of use.

*** Other Common Gases and Ranges Available for Portable Gas Detectors

Gas TypeMeasure RangeResolution
Ammonia (NH3)0-10/20/50/100/200/500/1000/2000/5000ppm0.01ppm/0.1ppm/1ppm
Benzene (C6H6)0-1/5/10/20/50/100/200/500/1000/2000/5000/10000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Carbon Dioxide (CO2)0-1000/2000/5000/10000/20000/50000ppm, 0-10%/20%/30%/50%/100% VOL1ppm, 0.01% VOL
Carbon Monoxide (CO)0-10/20/50/100/500/1000/2000ppm0.001ppm/0.01ppm/1ppm
Chlorine (Cl2)0-5/10/20/50/100/200ppm0.001ppm/0.01ppm/0.1ppm
Chlorine Dioxide (ClO2)0-1/5/10/20/50/100ppm0.001ppm/0.01ppm/0.1ppm
Ethylene (C2H4)0-10/20/50/100/500/1000/2000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Flammable0-100% LEL1% LEL
Formaldehyde (CH2O)0-10/20/50/100/500/1000ppm0.01ppm/0.1ppm/1ppm
Hydrocarbons (HC)0-100% LEL1% LEL
Hydrogen (H2)0-10/20/100/500/1000/2000/3000/5000/10000/20000/40000ppm, 0-4% VOL0.001ppm/0.01ppm/0.1ppm/1ppm, 0.001% VOL
Hydrogen Chloride (HCl)0-10/20/50/100/200/500/1000/2000ppm0.01ppm/0.1ppm/1ppm
Hydrogen Cyanide (HCN)0-10/20/50/100ppm0.01ppm/0.1ppm
Hydrogen Fluoride (HF)0-1/5/10/50ppm0.001ppm/0.01ppm
Hydrogen Sulfide (H2S)0-5/10/20/50/100/200/500/1000/2000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Methane (CH4)0-100% LEL, 0-50%/100% VOL1% LEL, 0.01%VOL
Methyl Bromide (CH3Br)0-50/100/200/500/1000/2000/3000ppm0.1ppm/1ppm
Nitric Oxide (NO)0-20/50/100/250/500/1000ppm0.01ppm/0.1ppm/1ppm
Nitrogen (N2)0-99.99%/100% VOL0.01% VOL
Nitrogen Dioxide (NO2)0-20/50/100/500/1000ppm0.01ppm/0.1ppm/1ppm
Oxygen (O2)0-25%/30%/100% VOL0.01% VOL
Ozone (O3)0-1/5/10/20/50/100/200/500/1000/2000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Phosgene (COCl2)0-1/5/10ppm0.001ppm
Phosphine (PH3)0-10/20/50/100/500/1000/2000/3000ppm0.01ppm/0.1ppm/1ppm
Sulfur Dioxide (SO2)0-20/50/100/500/1000ppm0.01ppm/0.1ppm/1ppm
Sulfur Hexafluoride (SF6)0-1000/2000/3000ppm1ppm
Volatile Organic Compounds (VOC)0-1/5/10/20/100ppm0.01ppm/0.1ppm


Details

Handheld Carbon Monoxide (CO) Gas Detector Details

Applications

Portable carbon monoxide detector, pump suction style, is used to measure the CO concentration and give an alarms in the confined space like tunnel, sewer, undergroud shaft, mines, cement plant, thermal power plants, agriculture, refinery and other industries, to effectively prevent the carbon monoxide poisoning accidents.

Carbon Monoxide CO Gas Detector Applications

Tips: What are the differences between pump suction and diffusion type gas detector?

A suction style gas detector is equipped with a small air pump. When it works, the pump draws the air sample from the tested region and sends the sample into the instrument for detection. The pump type gas detector features fast detection speed and remote measuring for dangerous areas, so as to maintain personnel safety. Other characteristics are the same with that of diffusion type gas detector.

A diffusion type gas detector is used for detection to sample the air by the free flow of air in detection area. Such a measuring method is easily to be affected by the detected environment, such as ambient temperature and wind speed.

Basic Settings of Portable Gas Detector

This video will show you the basic settings of ATO portable gas detectors including high/low alarm setting, language setting and time setting.

Calibration of Portable Gas Detector

This video will show how to calibrate the ATO portable gas detectors.

Concentration Detection of Pesticides Gas

Methyl bromide is an organic compound with the chemical formula CH3Br, which is mainly used as a pesticide, fumigant, refrigerant and solvent, and can also be used in organic synthesis.This video will mainly use methyl bromide and CH3Br as examples to introduce the detection of their concentrations.

How to Detect Hydrogen Sulfide Concentration in the Toilet

Hydrogen sulfide is a flammable acidic gas that smells like rotten eggs at low concentrations and is very toxic. In actual operation, it is necessary to ensure that the detection equipment or method used can accurately measure the concentration of hydrogen sulfide, and pay attention to safety issues during operation to avoid hydrogen sulfide poisoning.

How much C2H4 (ethylene) do ripe bananas and apples produce?

We have various gas detectors such as: CO, O2, O3, H2, NH3, H2S, CH4, Cl2, CH2O, etc, from 0~10000ppm, Industrial or daily use.

How Does a Portable Detector Work?

This video explains how a portable detector works and uses it to measure the air around you.

Portable Single Gas Detector Parameter Settings

In this video, we show you the menu settings of the ATO portable detector. Five button operation makes it very simple to control and activate functions. This device provides two alarm types, high alarm point and low alarm point, which can be adjusted as needed. The speed of the pump is also allowed to be adjusted. Calibration options include zero calibration and span calibration, both of which should be performed by qualified professionals under strict operating conditions using necessary accessories and standard gases.

How to Calibrate a Portable Gas Detector?

This video shows how to calibrate a portable gas detector. The ATO portable gas detector is lithium battery powered, has data logging capabilities and is available with a calibration kit.

Gas Detector Detection Range Setting

This video demonstrates the detection range setting of a portable gas detector.

Product reviews
Works very well.
5
Baptiste
Avatar
6/4/2018 7:31 PM
I am very happy this gas detector helped me find leaks I cannot smell.
Was this review helpful? Yes No (0/0)
Now the gas detector works great.
5
Morgan
Avatar
1/3/2019 6:51 PM
Shipped very fast. Although there was a problem of the turning on gas detector, it was solved soon with the help of customer service. Five-star service! Now the CO gas detector works great.
Was this review helpful? Yes No (0/0)
Portable gas detector for Hydrazine
5
Vincent
Avatar
6/18/2020 6:57 PM
Hi. Can you provide ATO-SKY2000 series gas detector for Hydrazine ?
Was this review helpful? Yes No (0/0)
ATO Responded
Hi, Vincent. We can provide hydrazine gas detector with available measuring ranges options: 0-1ppm, 0-10ppm, 0-50ppm, 0-100ppm,  0- 200ppm,  0-1000ppm, 0- 2000ppm & 0- 5000ppm. For more details, we will send you by email, please check.
I need a pump-type detector to detect H2S and CO2 gas.
5
Brandon
Avatar
7/23/2020 6:49 PM
Hello. I need a pump-type detector to detect H2S and CO2 gas. Can H2S and CO2 detector come in one unit? What is the shortest sampling time? What is the memory size (how many data points it can record before getting full)?
Was this review helpful? Yes No (0/0)
ATO Responded
Hi, Brandon. As required, the gas detector of H2S (0-500 ppm) and CO2 (up to 5%) can be provided in one unit. It is pump-type detector, and the shortest sampling time is less than 10 seconds. It can record ten thousand data points.
High-quality and easy to operate
5
Ali
Avatar
10/17/2022 10:20 AM
We bought this portable detector to ensure the safety of our laboratory experiments with a mixture of gas containing H2 and CO (we also have this company's H2 detector). The CO detector becomes useful for examining the connections for potential leakage. So far, I can say that it is fairly straightforward to handle and operate. Also, shipping to Canada was fast.
Was this review helpful? Yes No (0/0)
Reliable CO detector
5
Diana
Avatar
11/25/2022 2:11 AM
This carbon monoxide detector is reliable. Just place it in the right area, and the detector will quickly detect the carbon monoxide concentration. Works fine as described.
Was this review helpful? Yes No (0/0)
Here are some questions
5
Yangon
Avatar
8/7/2024 3:26 AM
I am very interested in your sensor mentioned above with options for detection levels even as low as 0-10 ppm with high resolution. I would appreciate if you can answer the following:
1. What is the underlying technology (e.g. electrochemical, catalytic bead oxidizer)?
2. Is presence of other gases a concern? (e.g. CO detection registering as H2)
3. How often is calibration required?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Principles of electrochemistry.
2. CO and H2 are two gases that interfere with each other.
Can you tell us what are the composition and concentration of each gas in the measured gas environment? Also, the pressure temperature and other ambient temperatures.
3. Normally calibrate once a year.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • LCD dot matrix display, direct readout of gas type, unit, concentration, local time, etc.
  • Support English/Chinese operation, easy to shift.
  • Gas concentration unit PPM and mg/m3 can be shift quickly.
  • Built-in micro-sampling pump, 10 grades of suction are available.
  • Explosion-proof certification

Gas Detector Functions

  • With self-calibration and zero calibration functions, makes the detection more accurate and reliable.
  • One key to restore factory setting, free from maloperation.
  • With temperature and pressure compensation, able to realize the compensation for the gas concentration under different temperature and pressure environments.
  • Two-stage alarm with sound and light, and alarm point is settable.
  • Rechargeable lithiumpolymer battery with large capacity.
  • High-strength special engineering plastic housing, with anti-slip, waterproof, dustproof and explosion-proof.

Specification

ModelGD200-CO
Sampling MethodPump type, flow rate can be up to 750ml/min
Detection PrincipleElectrochemistry
Range (Optional)*0 to 10ppm, 0 to 20ppm, 0 to 50ppm, 0 to 100ppm, 0 to 500ppm, 0 to 1000ppm, 0 to 2000ppm, 0 to 5000ppm, 0 to 10000ppm
Resolution0.001ppm (0-10/20/50ppm), 0.01ppm (0-100ppm) or 1ppm (0-500/1000/2000/5000/10000ppm)
Accuracy≤±3% F.S.
Response Time≤10s
Repeatability≤±1%
Recovery Time≤10s
Linearity Error≤±1%
Zero Shift≤±1% (F.S./year)
Data Logging (Optional Function)High speed data transmission by USB, available for data downloading and printing (The built-in IC card has about 2G memory, which can record 100,000 sets of data.)
AlarmsSound, light and vibration
DisplayLCD dot matrix display
LanguageChinese/English
Battery3.7V rechargeable lithium battery, 3.7 Watt (Charger included: Input AC 100-240V 50/60Hz with optional USA, Europe or UK plug)
Operating Time100h (Pump off)
Explosion-proof GradeII 1G Ex da ia IIC T4 Ga
Case MaterialABS+PC
Protection GradeIP66
CertificationCE, ATEX (Standard: EN IEC 60079-0:2018, EN 60079-1:2014)
Operating Temperature-20℃~50℃
Operating Humidity0~95%RH (non-condensing)
Operating Pressure0.8~1.2bar
Dimension205*75*32mm
Weight300g
Warranty12 months
Extension ProbeAbout 480mm (Total Length), About 300mm (Probe Head)
Accessories (Optional)Calibration kit - gas pressure regulator (calibration gas cylinder NOT included)
  • Body Material: Brass
  • Max. Input Pressure: ≤15MPa
  • Max. Output Pressure: 0.25MPa
  • Flowmeter Range: 0.1-1.5 L/min
  • Mounting Connection: Inlet port: W21.8-14; Outlet port: Ф6 flexible tube

Note 1:

  • If you require a CO gas detector with a measuring range not listed in the table above, please contact us with details about your operating environment. We can help you choose the right detector for your application.

  • We also offer gas detectors for other common gases. Please refer to the ATO Gas Detector Catalog for available gas types and measuring ranges.

Note 2:

Regarding the flow rate for gas detectors, there are 2 types:

  • Pump-Suction Type: Equipped with a built-in pump, with a flow rate of 600 mL/min. (Models: GD200, GD400, GD600)
  • Diffusion Type: Not equipped with a built-in pump, with a flow rate of 300 mL/min. (Models: GD300, GD500, GD800)

If you require a customized flow rate, please let us know your specific requirements. We will evaluate whether customization is possible. A flow rate that is too high or too low can affect measurement accuracy, so we recommend using an appropriate flow rate for your application.

Flow rate only needs to be considered when sampling gas from pipelines. For measuring gas concentrations in normal ambient air, you do not need to consider the flow rate. To measure confined spaces such as pipelines, please get in touch with us and provide the detailed conditions of use.

*** Other Common Gases and Ranges Available for Portable Gas Detectors

Gas TypeMeasure RangeResolution
Ammonia (NH3)0-10/20/50/100/200/500/1000/2000/5000ppm0.01ppm/0.1ppm/1ppm
Benzene (C6H6)0-1/5/10/20/50/100/200/500/1000/2000/5000/10000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Carbon Dioxide (CO2)0-1000/2000/5000/10000/20000/50000ppm, 0-10%/20%/30%/50%/100% VOL1ppm, 0.01% VOL
Carbon Monoxide (CO)0-10/20/50/100/500/1000/2000ppm0.001ppm/0.01ppm/1ppm
Chlorine (Cl2)0-5/10/20/50/100/200ppm0.001ppm/0.01ppm/0.1ppm
Chlorine Dioxide (ClO2)0-1/5/10/20/50/100ppm0.001ppm/0.01ppm/0.1ppm
Ethylene (C2H4)0-10/20/50/100/500/1000/2000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Flammable0-100% LEL1% LEL
Formaldehyde (CH2O)0-10/20/50/100/500/1000ppm0.01ppm/0.1ppm/1ppm
Hydrocarbons (HC)0-100% LEL1% LEL
Hydrogen (H2)0-10/20/100/500/1000/2000/3000/5000/10000/20000/40000ppm, 0-4% VOL0.001ppm/0.01ppm/0.1ppm/1ppm, 0.001% VOL
Hydrogen Chloride (HCl)0-10/20/50/100/200/500/1000/2000ppm0.01ppm/0.1ppm/1ppm
Hydrogen Cyanide (HCN)0-10/20/50/100ppm0.01ppm/0.1ppm
Hydrogen Fluoride (HF)0-1/5/10/50ppm0.001ppm/0.01ppm
Hydrogen Sulfide (H2S)0-5/10/20/50/100/200/500/1000/2000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Methane (CH4)0-100% LEL, 0-50%/100% VOL1% LEL, 0.01%VOL
Methyl Bromide (CH3Br)0-50/100/200/500/1000/2000/3000ppm0.1ppm/1ppm
Nitric Oxide (NO)0-20/50/100/250/500/1000ppm0.01ppm/0.1ppm/1ppm
Nitrogen (N2)0-99.99%/100% VOL0.01% VOL
Nitrogen Dioxide (NO2)0-20/50/100/500/1000ppm0.01ppm/0.1ppm/1ppm
Oxygen (O2)0-25%/30%/100% VOL0.01% VOL
Ozone (O3)0-1/5/10/20/50/100/200/500/1000/2000ppm0.001ppm/0.01ppm/0.1ppm/1ppm
Phosgene (COCl2)0-1/5/10ppm0.001ppm
Phosphine (PH3)0-10/20/50/100/500/1000/2000/3000ppm0.01ppm/0.1ppm/1ppm
Sulfur Dioxide (SO2)0-20/50/100/500/1000ppm0.01ppm/0.1ppm/1ppm
Sulfur Hexafluoride (SF6)0-1000/2000/3000ppm1ppm
Volatile Organic Compounds (VOC)0-1/5/10/20/100ppm0.01ppm/0.1ppm


Details

Handheld Carbon Monoxide (CO) Gas Detector Details

Applications

Portable carbon monoxide detector, pump suction style, is used to measure the CO concentration and give an alarms in the confined space like tunnel, sewer, undergroud shaft, mines, cement plant, thermal power plants, agriculture, refinery and other industries, to effectively prevent the carbon monoxide poisoning accidents.

Carbon Monoxide CO Gas Detector Applications

Tips: What are the differences between pump suction and diffusion type gas detector?

A suction style gas detector is equipped with a small air pump. When it works, the pump draws the air sample from the tested region and sends the sample into the instrument for detection. The pump type gas detector features fast detection speed and remote measuring for dangerous areas, so as to maintain personnel safety. Other characteristics are the same with that of diffusion type gas detector.

A diffusion type gas detector is used for detection to sample the air by the free flow of air in detection area. Such a measuring method is easily to be affected by the detected environment, such as ambient temperature and wind speed.

Product reviews
Works very well.
5
Baptiste
Avatar
6/4/2018 7:31 PM
I am very happy this gas detector helped me find leaks I cannot smell.
Was this review helpful? Yes No (0/0)
Now the gas detector works great.
5
Morgan
Avatar
1/3/2019 6:51 PM
Shipped very fast. Although there was a problem of the turning on gas detector, it was solved soon with the help of customer service. Five-star service! Now the CO gas detector works great.
Was this review helpful? Yes No (0/0)
Portable gas detector for Hydrazine
5
Vincent
Avatar
6/18/2020 6:57 PM
Hi. Can you provide ATO-SKY2000 series gas detector for Hydrazine ?
Was this review helpful? Yes No (0/0)
ATO Responded
Hi, Vincent. We can provide hydrazine gas detector with available measuring ranges options: 0-1ppm, 0-10ppm, 0-50ppm, 0-100ppm,  0- 200ppm,  0-1000ppm, 0- 2000ppm & 0- 5000ppm. For more details, we will send you by email, please check.
I need a pump-type detector to detect H2S and CO2 gas.
5
Brandon
Avatar
7/23/2020 6:49 PM
Hello. I need a pump-type detector to detect H2S and CO2 gas. Can H2S and CO2 detector come in one unit? What is the shortest sampling time? What is the memory size (how many data points it can record before getting full)?
Was this review helpful? Yes No (0/0)
ATO Responded
Hi, Brandon. As required, the gas detector of H2S (0-500 ppm) and CO2 (up to 5%) can be provided in one unit. It is pump-type detector, and the shortest sampling time is less than 10 seconds. It can record ten thousand data points.
High-quality and easy to operate
5
Ali
Avatar
10/17/2022 10:20 AM
We bought this portable detector to ensure the safety of our laboratory experiments with a mixture of gas containing H2 and CO (we also have this company's H2 detector). The CO detector becomes useful for examining the connections for potential leakage. So far, I can say that it is fairly straightforward to handle and operate. Also, shipping to Canada was fast.
Was this review helpful? Yes No (0/0)
Reliable CO detector
5
Diana
Avatar
11/25/2022 2:11 AM
This carbon monoxide detector is reliable. Just place it in the right area, and the detector will quickly detect the carbon monoxide concentration. Works fine as described.
Was this review helpful? Yes No (0/0)
Here are some questions
5
Yangon
Avatar
8/7/2024 3:26 AM
I am very interested in your sensor mentioned above with options for detection levels even as low as 0-10 ppm with high resolution. I would appreciate if you can answer the following:
1. What is the underlying technology (e.g. electrochemical, catalytic bead oxidizer)?
2. Is presence of other gases a concern? (e.g. CO detection registering as H2)
3. How often is calibration required?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Principles of electrochemistry.
2. CO and H2 are two gases that interfere with each other.
Can you tell us what are the composition and concentration of each gas in the measured gas environment? Also, the pressure temperature and other ambient temperatures.
3. Normally calibrate once a year.
Only registered users can write reviews
Customers who bought this item also bought

Portable Hydrogen (H2) Gas Detector, 0 to 500/1000/2000 ppm

GD200-H2
$784.62
Portable hydrogen (H2) gas detector draws the gas sample by a micro pump, with high accuracy and reliability, measurement ranging from 0 to 500ppm, 1000ppm, 2000ppm, 5000ppm for your choice. Real-time LCD display, audible, visual & vibrating alarm, durable and compact design, easy to carry and operate. High precision H2 detector with measuring range 0-10ppm (0.001ppm) is also available.

Portable Carbon Dioxide (CO2) Infrared Gas Detector, 0 to 2000/5000/10000 ppm

GD200-CO2
$969.23
Portable carbon dioxide (CO2) infrared detector adopts high accuracy sensor, measuring range available with 0-2000ppm, 0-5000ppm, 0-10000ppm, or 0-10%VOL, 0-20%VOL, 0 to 100% VOL, with LCD display, audible, visual & vibrating alarm, compact size, easy to carry and operate.

Portable Nitrogen (N2) Gas Detector, 0 to 100% Vol

GD200-N2
$891.38
Portable N2 gas detector, pump suction type, suitable for Nitrogen gas leakage detection with 0 to 100% Vol measuring range, and give an alarm with sound, light and vibration. Light & compact Nitrogen gas detector, high accuracy, fast response, and good cost performance.

Fixed Hydrogen (H2) Gas Detector, 0 to 1000/2000/5000 ppm

GD300-H2
$634.77
Affordable price hydrogen gas detector for sale. Optional measuring range 0-1000/2000/5000 ppm, max 10000 ppm, supports remote control with output signal 4-20mA and RS485, high accuracy 3% F.S. H2 gas leak detector for hydrogen concentration detecting with sound & light alarm, fixed design, compact structure.

Portable Oxygen (O2) Gas Detector, 0 to 30% Vol

GD200-O2
$479.22
Portable oxygen detector, ideal for monitoring O2 gas concentration in the range of 0 to 30% Vol or 0 to 100% Vol, with sound, light and vibrating alarm, light and compact, easy to setting and operation, long working time with large capacity battery, high accuracy and low price.