AC current sensor has measuring range of 50A/100A/200A/300A/400A/600A/800A/1000A/1200A to 1500A.
Specification:
| Model | ATO-AHKC-EKDA | ATO-AHKC-EKBDA | ATO-AHKC-EKCDA |
| Shipping weight | 1kg | ||
| Hole diameter * | 20mm | 40mm | 55mm |
| Measuring range of input current * | AC 0-50A ~ 0-500A | AC 0-200A ~ 0-1000A | AC 0-500A ~ 0-1500A |
| Output signal | DC 4-20mA | ||
| Zero offset current | ±0.05mA | ||
| Offset current drift | ±0.04mA/℃ | ||
| Linearity | ≤0.2%FS | ||
| Power supply * | DC 24V±10% or DC 12V±10% | ||
| Accuracy | 1.0%F.S. | ||
| Response time | ≤1ms | ||
| Withstand voltage | AC 2500V (between input, output and power supply) | ||
| Work temperature | -25~+70℃ | ||
| Storage temperature | -40~+85℃ | ||
| Humidity | ≤95%RH (no dew formation, no corrosive gas) | ||
| Elevation | ≤3500m | ||
| Measuring method | Split-core type | ||
| Installation | Screw fixation | ||
50A to 1500A AC current sensor dimensional diagram:
| Model | Dimension (mm) | ||||
| W | H | D | Φ (Hole diameter) | M (Mounting) | |
| ATO-AHKC-EKDA | 60 | 64 | 16 | 20 | 47 |
| ATO-AHKC-EKBDA | 100 | 102 | 24 | 40 | 80 |
| ATO-AHKC-EKCDA | 115 | 110 | 27 | 55 | 95.5 |
50A to 1500A AC current sensor wiring diagram:
Details

Tips: 6 attentions for using AC current sensor
- When selecting an AC current sensor, it is important to note whether the perforating dimensions ensures that the wire can pass through the hole of sensor. For example, the hole diameter of 100A ac current sensor can be 20mm, 40mm or 60mm. According to the size of the wire to choose the minimum hole diameter is the most appropriate.
- When choosing a current sensor, pay attention to whether the application environment in the field has high temperature, low temperature, high humidity, strong earthquake and other special environment.
- When choosing a current sensor, pay attention to whether the spatial structure is satisfied.
- When wiring pay attention to the bare conductive part of the terminal, to prevent ESD impact as far as possible, it need professional construction experienced engineer to carry out the wiring operation of the product. The power supply, input, output of each connecting wire must be properly connected, not misplaced or reverse, otherwise it may cause damage to the product.
- Product installation and environment should be free of conductive dust and corrosion.
- Severe vibrations or high temperatures may also cause damage to the product, and attention must be paid to the use of the occasion.
Product reviews
Can this current sensor solve my problem?
Aldrich
8/30/2021 2:24 AM
Hello. I need a current sensor for a specific application. I need to measure accurately in the range of about 2mA-20mA, but in some conditions, the current may exceed 40A. I don't need to measure this huge current, but the sensor should not burn. Can this sensor solve my issue?
Was this review helpful? (0/0)
Questions about current sensor
Lvan
11/15/2021 11:24 PM
I will be sensing motor current, 0-100mA DC. The motor will be reversing direction. What will happen when the polarity changes?
Was this review helpful? (0/0)
About measurement data
Trindo
6/8/2025 8:11 PM
I recently purchased the three-phase voltage sensor ATO-VOS-3AC500 and the current sensor ATO-CUS-AC1500. I would like to ask whether these two products measure effective values (RMS) or peak values (Peak)?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
AC Current Sensor, 5mA/100mA/1A/2A/5A to 10A
ATO-CUS-AC10
$72.63
AC current sensor adopts linear photoelectric isolation or modulation and demodulation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, input current terminal connection, DIN rail installation, widely used for AC current measurement of various occasions.
DC Current Sensor 1mA/1A/5A/10A/100A to 800A
ATO-CUS-DC800
$85.56
DC current sensor has best cost performance, fast response, high accuracy, good stability, small size, light weight, DIN rail installation, widely used for DC current measurement of various occasions.
3 Phase AC Current Transducer 0.5A/1A/2A/5A/10A/20A/50A to 80A
ATO-CUS-3AC80
$161.39
AC current transducer is a special current sensor for 3 phase AC current measurement. Three phase current transducer adopts epoxy resin pouring sealant to ensure the stability of components, with 0.5%FS accuracy, three output signals 4-20mA/0-20mA/0-5V/0-10V, power supply DC 5V/12V/24V, fixed installation. 3 phase AC current transducer is widely used for real-time monitoring of power grid AC current.
DC Current Sensor 50A/100A/200A/500A/1000A to 1500A
ATO-CUS-DC1500
$83.25
Hall effect DC current sensors are open loop current sensors, with split-core structure, 1ms fast response time, 1.0%FS accuracy, 4-20mA output signal, 12V/24V power supply, fixed installation, excellent linearity and strong anti-interference capacity. DC current sensors are widely used for DC current monitoring, system signal acquisition and feedback control.
3 Phase AC Voltage Transducer 10V to 500V, Output 0-5V/4-20mA/0-20mA
ATO-VOS-3AC500
$177.78
3 phase AC voltage transducer is a special voltage sensor for three-phase AC voltage measurement. Voltage transducer has a measuring range from AC 10V to 500V, supply voltage DC 12V/24V, output signal DC 0-5V/0-20mA/4-20mA. 3 phase voltage transducer is mainly used for power monitoring, power control and dispatching systems in petroleum, coal, metallurgy, railway and other industries.