Features
- Internal feedback circuit has good linearity and voltage stability, high voltage resistance, high current resistance, and high temperature resistance.
- Completely isolate weak and strong currents to ensure safe operation and control.
- Widely used in chemical, food, machinery, packaging, textile equipment, CNC machine tools, entertainment facilities and other automatic control fields.
Specification
| Model | ATO-SCR-LA-T | |||
| Module Type | Single phase or 2-phase | |||
| Load Current (Optional) | 25A, 40A, 75A, 90A, 120A | |||
| Load Voltage | 180-430VAC | |||
| Ambient Temperature | -20℃~+75℃ | |||
| Control Mode (Optional) | 0-5VDC, 4-20mA | |||
| On Voltage | ≤2V | |||
| Off Leakage Current | ≤10mA | |||
| On-off Time | ≤10mS | |||
| Dielectric Strength | 2000VAC | |||
| Certification | CE | |||
| Insulation Resistance | 500MΩ/500VDC | |||
| Mounting Method | Bolted | |||
| Work Instruction | LED | |||
Wiring Diagram


Installation Dimension (Unit: mm)

Tips: Notes when using SCR AC regulator modules.
- When wiring, be careful not to confuse the live (L) and neutral (N) wires in main circuit. Grid voltage cannot be lower than the lower limit of load voltage, otherwise the SCR regulator module cannot operate normally.
- Resistive load must not exceed 60% of the regulator module rated current. Inductive or capacitive load cannot exceed 40% of the rated current. Motor load must not exceed 20% of the rated current.
- Overcurrent and short circuit are the main causes of permanent damage to the thyristor. Therefore, pay attention to the overcurrent protection for SCR voltage regulator module. Current protection can be performed using fast-acting fuses or air switches.
- When using the SCR voltage regulator module, corresponding heat sink should be equipped. When the load radiation conditions are not good, compensation should be increased, and short-circuit loads are not allowed.
Product reviews
SCR AC voltage regulator module can be used safely
Heermans
3/25/2021 12:32 AM
I rarely shop online. This is the first time I have purchased a product in the ATO.com online store. I bought this SCR AC voltage regulator module with the attitude of giving it a try. Because it can completely isolate weak and strong currents, I can use it safely and securely.
Was this review helpful? (0/0)
Please help to recommend the water pressure regulator for me.Thx~
Ross
9/9/2022 3:08 AM
I own an RV. Park here in Texas. The water is sent to me at 150 psi by the company that delivers water to the parking lot.
I need to lower the pressure in my 2" water main to 55 psi.
The best I can do in regards to the details of my urgent need for a water pressure regulator is that.
I need to lower the pressure in my 2" water main to 55 psi.
The best I can do in regards to the details of my urgent need for a water pressure regulator is that.
Was this review helpful? (0/0)
Solid SCR module for smooth speed control
Oliver
11/5/2025 12:54 AM
This SCR module works like a charm! Hooked it up to our 220V conveyor system and now get smooth speed control using the 4-20mA signal. The built-in isolation makes me feel safe when adjusting parameters.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
AC/DC Voltage Sensor 75mV to 500V, RMS 0-5V/0-10V/4-20mA/0-20mA Output
ATO-VOS-ACDC500
$161.27
Voltage sensor has voltage measuring range from AC/DC 75mV/50V/100V/250V/300V to 500V, supply voltage DC 12V/24V, output DC voltage/current or True RMS voltage/current signal 0-5V/0-10V/0-20mA/4-20mA and protection class IP20. AC/DC voltage sensor has two installation methods, DIN rail installation and M3 screw fixation.