3 Phase 3-Wire SCR Power Regulator

$187.46
SCR power regulator is mainly used for power & voltage regulation and temperature control in electric power system. Rated current can select 25/40/75/90A, rated voltage is 380VAC, 3 phase 3-wire. Control signals have 3 types for selection or 3 types to switch. Power controller comes with protection function, good quality, safe and reliable.
SKU: ATO-PRG-3320
*
Free Shipping
Delivery date: 6-12 days

Features

  • Linear phase shift control circuit control circuit, good stability and high accuracy. Modular, high pressure resistant, anti-interference.
  • Protection method is built-in fast fuse.
  • Adopts vacuum welding technology, optimized heat dissipation, good quality, long service life, safety and reliability.
  • With multi-function LED to indicate working status.

Specification

ModelATO-AYSCR-LAATO-J3SCR-LA
Rated Voltage3 Phase 380VAC3 Phase 380VAC
Wires3 Phase 3-Wire3 Phase 3-Wire
Rated Current (Should be at least twice the actual current)25A40A75A90A
LoadY connection method (220V AC)8kW13kW23kW30kW
▲ connection method (380V AC)14kW22kW40kW50kW
Auxiliary Power-220VAC
Control Signal4-20mA, 0-5VDC, 0-10VDC4-20mA, 0-5VDC, 0-10VDC
(3 ways can switch)
Protection Functionfast fuse
CertificationCE
Operation Frequency50Hz/60Hz
Output Modephase output
Use Environmenttemperature<45℃
humidity<90%RH

Star (Y) Type Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Star Type Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Triangle Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Triangle Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Phase Output of 3 Phase 3-Wire SCR Power Regulator

Details

3-Phase 3-Wire SCR Power Regulator Details

Precautions

  1. Main circuit uses 3-phase 3-wire input, no phase sequence is required.
  2. SCR is high current product, please be sure to lock the (R.S.T) and (U.V.W) terminals, otherwise the terminals will heat up and the SCR will burn out.
  3. SCR has a built-in fast fuse for over current and short circuit protection. If the fuse is blown due to overcurrent, first check the load for faults such as short circuit and partial discharge. After troubleshooting, open the panel and replace it. Be sure to replace it with fuse of the same specification. Be careful not to increase amperage of the fuse at will.
  4. When using the load Y type wiring method, center point cannot be connected to zero line, otherwise the SCR will lose control. If 3-phase load is unbalanced, center point must be connected to zero line.

Model ATO-PRG-AY Dimension Drawing

Model ATO-PRG-AY Dimension Drawing

Model ATO-PRG-J3 Dimension Drawing

Model ATO-PRG-J3 Dimension Drawing

Dimension Chart

ModelOutline Dimension (mm)Installation Dimension (mm)
LWHLW
ATO-PRG-AY16511016595100
ATO-PRG-J3230110165160100
Product reviews
Whether the 3-phase 3-wire power regulator can keep the amperage stable
5
Bjorn
Avatar
7/5/2021 11:43 PM
Wondering about the 3 phase 3 wire scr power regulator. It says for power and voltage regulation. Does that mean it's good for holding amperage steady?
Was this review helpful? Yes No (0/0)
ATO Responded
The power regulator is used to adjust the power and voltage of the heating thermostat equipment and the power system and control the temperature. But the current stability is related to the input voltage.
Information about the 3 phase 3 wire power regulator
5
Rick
Avatar
7/23/2021 12:57 AM
Wondering about the 3 phase 3 wire scr power regulator. It says for power and voltage regulation.
Was this review helpful? Yes No (0/0)
ATO Responded
The power regulator is used to adjust the power and voltage of the heating thermostat equipment and the power system and control the temperature. But the current stability is related to the input voltage.
The role of 3 phase 3 wire power regulator
5
Melon
Avatar
8/25/2021 3:19 AM
Wondering about the 3 phase 3 wire scr power regulator. It says for power and voltage regulation. Does that mean it's good for holding amperage steady?
Was this review helpful? Yes No (0/0)
ATO Responded
The power regulator is used to adjust the power and voltage of the heating thermostat equipment and the power system and control the temperature. But the current stability is related to the input voltage.
Pleased with this SCR power regulator
5
Shaun
Avatar
6/24/2022 3:43 AM
I'm very pleased with this 3 phase 3-wire SCR power regulator. It has four voltages to choose from. Power controller comes with protection function and good quality. I will order more.
Was this review helpful? Yes No (1/0)
Control of the voltage
5
Karl
Avatar
5/29/2024 3:42 PM
Hi what does it mean E2 and E3 must be shorted when external VR is not used?
Is there a wiring diagram for the internal VR?

Thanks
Karl
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, by "E2 and E3", which 2 terminals are your referring to? There are Not such terminals on the diagram.
Please contact support@ato.com so we can better help.
Reliable and precise
5
William
Avatar
9/29/2025 12:47 AM
This regulator delivers stable power control for our heating system. Easy to install and the multi-signal input is helpful. The thermal management works well under continuous operation.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Linear phase shift control circuit control circuit, good stability and high accuracy. Modular, high pressure resistant, anti-interference.
  • Protection method is built-in fast fuse.
  • Adopts vacuum welding technology, optimized heat dissipation, good quality, long service life, safety and reliability.
  • With multi-function LED to indicate working status.

Specification

ModelATO-AYSCR-LAATO-J3SCR-LA
Rated Voltage3 Phase 380VAC3 Phase 380VAC
Wires3 Phase 3-Wire3 Phase 3-Wire
Rated Current (Should be at least twice the actual current)25A40A75A90A
LoadY connection method (220V AC)8kW13kW23kW30kW
▲ connection method (380V AC)14kW22kW40kW50kW
Auxiliary Power-220VAC
Control Signal4-20mA, 0-5VDC, 0-10VDC4-20mA, 0-5VDC, 0-10VDC
(3 ways can switch)
Protection Functionfast fuse
CertificationCE
Operation Frequency50Hz/60Hz
Output Modephase output
Use Environmenttemperature<45℃
humidity<90%RH

Star (Y) Type Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Star Type Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Triangle Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Triangle Wiring Diagram of 3 Phase 3-Wire SCR Power Regulator

Phase Output of 3 Phase 3-Wire SCR Power Regulator

Details

3-Phase 3-Wire SCR Power Regulator Details

Precautions

  1. Main circuit uses 3-phase 3-wire input, no phase sequence is required.
  2. SCR is high current product, please be sure to lock the (R.S.T) and (U.V.W) terminals, otherwise the terminals will heat up and the SCR will burn out.
  3. SCR has a built-in fast fuse for over current and short circuit protection. If the fuse is blown due to overcurrent, first check the load for faults such as short circuit and partial discharge. After troubleshooting, open the panel and replace it. Be sure to replace it with fuse of the same specification. Be careful not to increase amperage of the fuse at will.
  4. When using the load Y type wiring method, center point cannot be connected to zero line, otherwise the SCR will lose control. If 3-phase load is unbalanced, center point must be connected to zero line.
Product reviews
Whether the 3-phase 3-wire power regulator can keep the amperage stable
5
Bjorn
Avatar
7/5/2021 11:43 PM
Wondering about the 3 phase 3 wire scr power regulator. It says for power and voltage regulation. Does that mean it's good for holding amperage steady?
Was this review helpful? Yes No (0/0)
ATO Responded
The power regulator is used to adjust the power and voltage of the heating thermostat equipment and the power system and control the temperature. But the current stability is related to the input voltage.
Information about the 3 phase 3 wire power regulator
5
Rick
Avatar
7/23/2021 12:57 AM
Wondering about the 3 phase 3 wire scr power regulator. It says for power and voltage regulation.
Was this review helpful? Yes No (0/0)
ATO Responded
The power regulator is used to adjust the power and voltage of the heating thermostat equipment and the power system and control the temperature. But the current stability is related to the input voltage.
The role of 3 phase 3 wire power regulator
5
Melon
Avatar
8/25/2021 3:19 AM
Wondering about the 3 phase 3 wire scr power regulator. It says for power and voltage regulation. Does that mean it's good for holding amperage steady?
Was this review helpful? Yes No (0/0)
ATO Responded
The power regulator is used to adjust the power and voltage of the heating thermostat equipment and the power system and control the temperature. But the current stability is related to the input voltage.
Pleased with this SCR power regulator
5
Shaun
Avatar
6/24/2022 3:43 AM
I'm very pleased with this 3 phase 3-wire SCR power regulator. It has four voltages to choose from. Power controller comes with protection function and good quality. I will order more.
Was this review helpful? Yes No (1/0)
Control of the voltage
5
Karl
Avatar
5/29/2024 3:42 PM
Hi what does it mean E2 and E3 must be shorted when external VR is not used?
Is there a wiring diagram for the internal VR?

Thanks
Karl
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, by "E2 and E3", which 2 terminals are your referring to? There are Not such terminals on the diagram.
Please contact support@ato.com so we can better help.
Reliable and precise
5
William
Avatar
9/29/2025 12:47 AM
This regulator delivers stable power control for our heating system. Easy to install and the multi-signal input is helpful. The thermal management works well under continuous operation.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews