3-Phase 4-Wire SCR Power Regulator

$192.62
SCR power regulator can regulate voltage/power and control temperature. Input is 3-phase 4-wire, rated voltage is 380VAC. Rated current is 40A/75A/90A/120A optional. Control signals can select 4-20mA, 0-5VDC, 0-10VDC. Power controller comes with protection function, safe and durable. Protection function is built-in fuse, simple wiring and easy maintenance.
SKU: ATO-PRG-4340
*
*
Free Shipping
Delivery date: 6-12 days

Features

  • Phase control: continuous intersection control, stable output, ammeter does not flutter, but half wave every cycle will generate harmonics.
  • Use load: constant impedance load, variable impedance load, IR lamp.
  • Zero-position control: Distributed zero-position control, minimum resolution is 1Hz, will not generate harmonics, and the ammeter appears jittering when output.
  • Applicable load: constant impedance load.

Specification

ModelATO-PRSCR-LA
Rated Voltage3 Phase 380VAC, Fan 220VAC
Wiring3-Phase 4-Wire
Rated Current (Should be at least twice the actual current)40A, 75A, 90A, 120A
Control Signal4-20mA, 0-5VDC, 0-10VDC
Protection Functionfast fuse
Operation Frequency50Hz/60Hz
CertificationCE
Outline Dimension (L*W*H)130mm*126mm*152mm
Installation Dimension (L*W)90mm*116mm
Output Modephase output
Use Environmenttemperature<45℃, humidity<90%RH

Wiring Diagram of 4-Wire 3-Phase SCR Power Regulator

Wiring Diagram of 4-Wire 3-Phase SCR Power Regulator

Phase output of SCR Power Regulator

Details

4-Wire 3-Phase SCR Power Regulator Details

Precautions

  1. Main circuit is 3-phase 4-wire input, no phase sequence is required.
  2. SCR is high current product, please be sure to lock the (R.S.T) and (U.V.W) terminals, otherwise the terminals will heat up, causing e SCR burn out.
  3. SCR has a built-in fast fuse for over current and short circuit protection. If the fuse is blown, be sure to replace it with fuse of the same specification. Be careful not to increase amperage of the fuse at will.
  4. When using 3-phase load Y type connection, the center point of Y must be connected to zero line. If the center line of Y is not connected to zero line, the 3-phase load needs to be relatively balanced.
  5. When using the module, if load power is high or heat dissipation conditions are not good, please consider air cooling.
Product reviews
Awesome power regulator!
5
Firth
Avatar
4/7/2022 7:15 PM
Works great! It's great control the power when we're using it. Can't complain for a $192 power regulator, does exactly what it's supposed to, with every penny. Highly recommend it!
Was this review helpful? Yes No (0/0)
Separate power supply
5
Karike
Avatar
4/21/2025 8:21 PM
The fans are still separate power supplies, right?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, these fans require a separate auxiliary power supply.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Phase control: continuous intersection control, stable output, ammeter does not flutter, but half wave every cycle will generate harmonics.
  • Use load: constant impedance load, variable impedance load, IR lamp.
  • Zero-position control: Distributed zero-position control, minimum resolution is 1Hz, will not generate harmonics, and the ammeter appears jittering when output.
  • Applicable load: constant impedance load.

Specification

ModelATO-PRSCR-LA
Rated Voltage3 Phase 380VAC, Fan 220VAC
Wiring3-Phase 4-Wire
Rated Current (Should be at least twice the actual current)40A, 75A, 90A, 120A
Control Signal4-20mA, 0-5VDC, 0-10VDC
Protection Functionfast fuse
Operation Frequency50Hz/60Hz
CertificationCE
Outline Dimension (L*W*H)130mm*126mm*152mm
Installation Dimension (L*W)90mm*116mm
Output Modephase output
Use Environmenttemperature<45℃, humidity<90%RH

Wiring Diagram of 4-Wire 3-Phase SCR Power Regulator

Wiring Diagram of 4-Wire 3-Phase SCR Power Regulator

Phase output of SCR Power Regulator

Details

4-Wire 3-Phase SCR Power Regulator Details

Precautions

  1. Main circuit is 3-phase 4-wire input, no phase sequence is required.
  2. SCR is high current product, please be sure to lock the (R.S.T) and (U.V.W) terminals, otherwise the terminals will heat up, causing e SCR burn out.
  3. SCR has a built-in fast fuse for over current and short circuit protection. If the fuse is blown, be sure to replace it with fuse of the same specification. Be careful not to increase amperage of the fuse at will.
  4. When using 3-phase load Y type connection, the center point of Y must be connected to zero line. If the center line of Y is not connected to zero line, the 3-phase load needs to be relatively balanced.
  5. When using the module, if load power is high or heat dissipation conditions are not good, please consider air cooling.
Product reviews
Awesome power regulator!
5
Firth
Avatar
4/7/2022 7:15 PM
Works great! It's great control the power when we're using it. Can't complain for a $192 power regulator, does exactly what it's supposed to, with every penny. Highly recommend it!
Was this review helpful? Yes No (0/0)
Separate power supply
5
Karike
Avatar
4/21/2025 8:21 PM
The fans are still separate power supplies, right?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, these fans require a separate auxiliary power supply.
Only registered users can write reviews