Torque Load Cell for Compression/ Torque Measument

$679.63
Reliable torque load cell for sale for compression/torque measurement at low cost. Capacities available from 300N-3N.m, 500N-5N.m, 1000N-10N.m. This high performance torque load cell is also easy to integrate into systems for use with digital panel meters and load cell transmitters.
SKU: ATO-LC-W003
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Buy ATO's torque load cell now and enjoy a favorable price, designed for compression and torque measurement, can be applied to a variety of mechanical and electronic equipment. A variety of measurement ranges can be selected from 300N-3N.m/500N-5N.m/1000N-10N.m. This load cell has a response frequency of up to 10 kHz, which is convenient to provide you with a low-cost and high-performance solution.

Specification

ModelATO-DYDW-003
Capacity300N-3N.m/500N-5N.m/1000N-10N.m (optional)
Matched Display ControllerATO-DPM-DY220 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Rated Output2.0 ± 10% mV/V
Zero Balance±2% F.S.
Non-Linearity0.1% F.S.
Hysteresis0.1% F.S.
Repeatability0.1% F.S.
Creep0.05% F.S. (30 min)
Temp Effect on Output0.05% F.S./10°C
Temp Effect on Zero0.05% F.S./10°C
Response Frequency10 kHz
MaterialAlloy steel
Impedance350 Ω
Insulation≥5000 MΩ/100 VDC
Operating Temp Range-20°C to 80°C
Operating Voltage5-15V
Safe Overload120%
Maximum Overload200%
Cable SpecificationsΦ3*2 m
Cable Ultimate Pull10 kg


Dimension (unit: mm)

Torque load cell size

  • Figure 1 is the dimension drawing of 300N-3N.m
  • Figure 2 is the dimension drawing of 500N-5N.m/1000N-10N.m

Features

Torque load cell feature

  1. 42CrMo Alloy Steel: Alloy steel has the advantages of high strength and high toughness durability, not easy to rust, high temperature resistance and wear resistance.
  2. Pressure/ Torque Force Bidirectional Force: This pull-pressure-torque load cell is characterized by high accuracy, high dynamic response small size and small mutual coupling.
  3. 6-corner Waterproof Connector: High-quality waterproof connector is stable and durable, which can prevent the wire from pulling and breaking, and is not easy to be damaged.

Wiring Drawing

Torque load cell wiring diagram

Load Cell Force Diagram

Torque load cell force diagram

Tips: How does a torque load cell work?

A torque sensor (also known as a torque load cell) works by measuring the torque (rotational force) applied to a shaft. It utilizes the principle of resistance strain gauges to capture changes in torque and convert them into electrical signals. These signals are processed to accurately reflect the magnitude and direction of the torque. Torque sensors are widely used in mechanical engineering, test equipment, automobile manufacturing and other fields.

In order to ensure that the torque transducer works stably for a long period of time, regular maintenance is necessary. Firstly, overloading and violent shocks should be avoided, which will lead to damage of the load cell. Second, regularly check the cable connections for looseness or wear to ensure proper signal transmission. In addition, cleaning the surface of the load cell to prevent dust and oil from accumulating will also extend its service life. For load cell sensors that will not be used for a long time, they should be stored in a dry, corrosion-free environment.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

Product reviews
Accurate Data
5
Han
Avatar
2/5/2025 7:16 PM
The measurement accuracy of this Torque Load Cell for Compression/Torque Measument is very high. It can accurately capture small torque changes and provide reliable data support in both compression and torque measurement applications.
Was this review helpful? Yes No (0/0)
High quality torque load cell
5
Elowen
Avatar
7/13/2026 7:25 PM
I added this load cell to a machine testing setup and was impressed by its accuracy. The bidirectional measurement function is very useful, and the compact size saves installation space.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Buy ATO's torque load cell now and enjoy a favorable price, designed for compression and torque measurement, can be applied to a variety of mechanical and electronic equipment. A variety of measurement ranges can be selected from 300N-3N.m/500N-5N.m/1000N-10N.m. This load cell has a response frequency of up to 10 kHz, which is convenient to provide you with a low-cost and high-performance solution.

Specification

ModelATO-DYDW-003
Capacity300N-3N.m/500N-5N.m/1000N-10N.m (optional)
Matched Display ControllerATO-DPM-DY220 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Rated Output2.0 ± 10% mV/V
Zero Balance±2% F.S.
Non-Linearity0.1% F.S.
Hysteresis0.1% F.S.
Repeatability0.1% F.S.
Creep0.05% F.S. (30 min)
Temp Effect on Output0.05% F.S./10°C
Temp Effect on Zero0.05% F.S./10°C
Response Frequency10 kHz
MaterialAlloy steel
Impedance350 Ω
Insulation≥5000 MΩ/100 VDC
Operating Temp Range-20°C to 80°C
Operating Voltage5-15V
Safe Overload120%
Maximum Overload200%
Cable SpecificationsΦ3*2 m
Cable Ultimate Pull10 kg


Dimension (unit: mm)

Torque load cell size

  • Figure 1 is the dimension drawing of 300N-3N.m
  • Figure 2 is the dimension drawing of 500N-5N.m/1000N-10N.m

Features

Torque load cell feature

  1. 42CrMo Alloy Steel: Alloy steel has the advantages of high strength and high toughness durability, not easy to rust, high temperature resistance and wear resistance.
  2. Pressure/ Torque Force Bidirectional Force: This pull-pressure-torque load cell is characterized by high accuracy, high dynamic response small size and small mutual coupling.
  3. 6-corner Waterproof Connector: High-quality waterproof connector is stable and durable, which can prevent the wire from pulling and breaking, and is not easy to be damaged.

Wiring Drawing

Torque load cell wiring diagram

Load Cell Force Diagram

Torque load cell force diagram

Tips: How does a torque load cell work?

A torque sensor (also known as a torque load cell) works by measuring the torque (rotational force) applied to a shaft. It utilizes the principle of resistance strain gauges to capture changes in torque and convert them into electrical signals. These signals are processed to accurately reflect the magnitude and direction of the torque. Torque sensors are widely used in mechanical engineering, test equipment, automobile manufacturing and other fields.

In order to ensure that the torque transducer works stably for a long period of time, regular maintenance is necessary. Firstly, overloading and violent shocks should be avoided, which will lead to damage of the load cell. Second, regularly check the cable connections for looseness or wear to ensure proper signal transmission. In addition, cleaning the surface of the load cell to prevent dust and oil from accumulating will also extend its service life. For load cell sensors that will not be used for a long time, they should be stored in a dry, corrosion-free environment.

Product reviews
Accurate Data
5
Han
Avatar
2/5/2025 7:16 PM
The measurement accuracy of this Torque Load Cell for Compression/Torque Measument is very high. It can accurately capture small torque changes and provide reliable data support in both compression and torque measurement applications.
Was this review helpful? Yes No (0/0)
High quality torque load cell
5
Elowen
Avatar
7/13/2026 7:25 PM
I added this load cell to a machine testing setup and was impressed by its accuracy. The bidirectional measurement function is very useful, and the compact size saves installation space.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Miniature Tension and Compression Load Cell 3kg/20kg/100kg to 500kg

ATO-LC-TC02
$172.49
Miniature load cell can bear both tension and compression force, with metal-foil strain gauge, all stainless steel, small size, 1.0±0.2mV/V sensitivity. Miniature tension and compression load cell is used for force tester, riveting machine, laminator and welding machine.

Subminiature Load Cell, Button type, 3kg/5kg/10kg/20kg/50kg/100kg

ATO-LC-BU01
$123.81
Subminiature load cell is a button type load cell with a diameter only 8mm. It is made of stainless steel, with protection class IP66, Φ2*2m cable. Subminiature load cell can be used for keyboard button hand-feeling test, force tester, automated assembly of new energy products and automotive products. It can be customized for the high-temperature working condition such as injection moulding, extrusion and other manufacturing processes.