Pedal Force Load Cell Sensor for Automotive, 1-200kg

$212.35
Discounted pedal force load cell sensor for sale, has a capacity range of 1-200kg, with optional ranges of 0-50kg, 0-100kg, and 0-200kg. Pedal load cell has a rated output of 1.0-1.5mV/V and a zero balance of ±2%F.S. Built with alloy steel, stainless steel, or aluminum alloy, pedal force load cell has an impedance of 700Ω and insulation of ≥5000MΩ/100VDC. Ideal for measuring pedal forces, brake force, and dynamic loads in automotive systems.
SKU: ATO-LC-TB002
*
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

The pedal force load cell sensor offers a capacity range of 1-200kg, with optional ranges of 0-50kg and 0-100kg. It delivers a rated output of 1.0-1.5mV/V with a zero balance of ±2%F.S. This sensor is perfect for measuring pedal forces, brake force, and dynamic loads in automotive applications.

Specification

ModelATO-DYTB-002
Capacity1-200kg (optional 0-50kg, 0-100kg, 0-200kg)
Matched TransmitterATO-LCTR-OA  (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Rated Output1.0-1.5mV/V
Zero Balance±2%F.S.
Non-Linearity0.3%F.S.
Hysteresis0.3%F.S.
Repeatability0.1%F.S.
Creep (30min)0.05%F.S.
Temp Effect on Output0.05%F.S./10°C
Temp Effect on Zero0.3%F.S./10°C
Response Frequency10kHz
MaterialAlloy Steel/Stainless Steel/Aluminum Alloy
Impedance700Ω
Insulation≥5000MΩ/100VDC
Operating Voltage5-10V
Operating Temperature Range-20 to 70°C
Safe Overload150%
Maximum Overload200%
Cable SpecificationsΦ3×2m
Cable Ultimate Pull10kg
TEDSOptional (Contact customer service)


Feature

Pedal force load cell sensor feature

  • Wide Measurement Range: Pedal force load cell sensor supports a measurement range of 0 to 200kg, suitable for various automotive applications.
  • High Precision: Ensures stable and accurate measurements with minimal lateral interference, making it highly reliable for testing.
  • Compact and Robust Design: Pedal force load cell has a low-profile structure that is easy to install and designed for high stability and durability.
  • Advanced Material: Made from lightweight aluminum alloy with excellent casting and machining properties, combining strength and versatility.
  • Specialized for Automotive Testing: Ideal for measuring pedal forces in vehicles, brake force, and dynamic load testing in automotive inspection systems.
  • Flexible Installation: Equipped with a fan-shaped structure for easy and adaptable mounting on vehicle pedals or other surfaces.
  • Broad Application Scope: Pedal load cell widely used in automotive pedal force testing, automation assembly lines, and other automated devices or testing fields.
  • Anti-Interference Design: Built to resist lateral forces and vibrations, ensuring consistent performance even in dynamic environments.

Dimension (unit: mm)

Pedal force load cell sensor for automotive size

Wiring Method

Pedal load cell sensor wiring method 1

Pedal load cell sensor wiring method 2

Application

Pedal force load cell sensor for automotive application

Tips: What are the key applications of pedal force load cell sensor in the automotive industry?

This load cell sensor is specifically designed for automotive applications. It is widely used in measuring pedal forces in vehicles to ensure compliance with safety and performance standards. The sensor is also ideal for brake force testing, helping to evaluate the effectiveness of braking systems under various conditions. In addition, it plays a critical role in dynamic load testing within automotive inspection systems, providing real-time data for performance analysis and quality assurance.

In this video, we've shown you how to calibrate the weight transmitter Model 610 by ATO using a compression load cell so that you can make sure you get the most accurate readings possible in your measurement.

In this video, ATO offers a variety of load cells and weigh modules designed for your applications.

Product reviews
Widely applicable
5
Jet
Avatar
1/15/2025 7:27 PM
As a pedal force sensor designed specifically for the automotive industry, the Pedal Force Load Cell Sensor has brought me a stunning user experience. Firstly, its precision is impressive. Whether it is the force measurement on the brake pedal or accelerator pedal, the data is very accurate and responds quickly, fully meeting the automotive industry's demand for high-precision sensors.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

The pedal force load cell sensor offers a capacity range of 1-200kg, with optional ranges of 0-50kg and 0-100kg. It delivers a rated output of 1.0-1.5mV/V with a zero balance of ±2%F.S. This sensor is perfect for measuring pedal forces, brake force, and dynamic loads in automotive applications.

Specification

ModelATO-DYTB-002
Capacity1-200kg (optional 0-50kg, 0-100kg, 0-200kg)
Matched TransmitterATO-LCTR-OA  (Click it to the transmitter page)
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Rated Output1.0-1.5mV/V
Zero Balance±2%F.S.
Non-Linearity0.3%F.S.
Hysteresis0.3%F.S.
Repeatability0.1%F.S.
Creep (30min)0.05%F.S.
Temp Effect on Output0.05%F.S./10°C
Temp Effect on Zero0.3%F.S./10°C
Response Frequency10kHz
MaterialAlloy Steel/Stainless Steel/Aluminum Alloy
Impedance700Ω
Insulation≥5000MΩ/100VDC
Operating Voltage5-10V
Operating Temperature Range-20 to 70°C
Safe Overload150%
Maximum Overload200%
Cable SpecificationsΦ3×2m
Cable Ultimate Pull10kg
TEDSOptional (Contact customer service)


Feature

Pedal force load cell sensor feature

  • Wide Measurement Range: Pedal force load cell sensor supports a measurement range of 0 to 200kg, suitable for various automotive applications.
  • High Precision: Ensures stable and accurate measurements with minimal lateral interference, making it highly reliable for testing.
  • Compact and Robust Design: Pedal force load cell has a low-profile structure that is easy to install and designed for high stability and durability.
  • Advanced Material: Made from lightweight aluminum alloy with excellent casting and machining properties, combining strength and versatility.
  • Specialized for Automotive Testing: Ideal for measuring pedal forces in vehicles, brake force, and dynamic load testing in automotive inspection systems.
  • Flexible Installation: Equipped with a fan-shaped structure for easy and adaptable mounting on vehicle pedals or other surfaces.
  • Broad Application Scope: Pedal load cell widely used in automotive pedal force testing, automation assembly lines, and other automated devices or testing fields.
  • Anti-Interference Design: Built to resist lateral forces and vibrations, ensuring consistent performance even in dynamic environments.

Dimension (unit: mm)

Pedal force load cell sensor for automotive size

Wiring Method

Pedal load cell sensor wiring method 1

Pedal load cell sensor wiring method 2

Application

Pedal force load cell sensor for automotive application

Tips: What are the key applications of pedal force load cell sensor in the automotive industry?

This load cell sensor is specifically designed for automotive applications. It is widely used in measuring pedal forces in vehicles to ensure compliance with safety and performance standards. The sensor is also ideal for brake force testing, helping to evaluate the effectiveness of braking systems under various conditions. In addition, it plays a critical role in dynamic load testing within automotive inspection systems, providing real-time data for performance analysis and quality assurance.

Product reviews
Widely applicable
5
Jet
Avatar
1/15/2025 7:27 PM
As a pedal force sensor designed specifically for the automotive industry, the Pedal Force Load Cell Sensor has brought me a stunning user experience. Firstly, its precision is impressive. Whether it is the force measurement on the brake pedal or accelerator pedal, the data is very accurate and responds quickly, fully meeting the automotive industry's demand for high-precision sensors.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.