Slot Type Photoelectric Sensor

$63.81
Slot-type photoelectric sensor is also known as U-type photoelectric sensor. It's a type of through beam photoelectric sensor and easier to align through beam. Slot type photoelectric sensor can distinguish opaque objects, with power supply DC 12V-24V (6-36V), small installation space, reverse power protection.
SKU: ATO-PHOS-ST
*
*
Free Shipping
Delivery date: 6-12 days

Slot type photoelectric sensor with reverse power protection can be directly connected with PLC.

Applications: Photoelectric sensors have been used as position detection, liquid level control, product counting, width discrimination, speed detection, fixed length cutting, holes recognition, signal delay, automatic door sensing, color scale detection, punching and cutting Machine and security and many other areas. In addition, using the stealthiness of infrared, photoelectric sensors also can be used as a burglar alarm in banks, warehouses, shops, and offices.

Specification:

ModelATO-PSST-AE3S-GS7ATO-PSST-AE3S-GS15ATO-PSST-AE3S-GS30
Dimension16*25*55mm15*35.5*40.5mm20*55*72mm
DC typeNPNNONONO
NCNCNC
--NO+NC
PNPNONONO
NCNCNC
--NO+NC
Detection range7mm15mm30mm
Detection targetOpaque objectOpaque objectOpaque object
Detection range regulationSensitivity controllerSensitivity controllerSensitivity controller
Response time1ms1ms1ms
Connection delay1.5ms
Light sourceInfrared light 660nm
Power supplyDC type: DC 12-24V (6-36V), impulse (p-p) 10% below
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤20mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, A type: ≤400mA, J type: ≤2A (contact service life: 0.1 million times)
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~+65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~+65℃, at +23℃, ±15% detection distance; Temperature range -25~+60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Aluminum die casting (ABS), Detection surface (lens): PMMA
Protection classIP65
Cable length2m

Slot type photoelectric sensor dimensional drawing:
Slot type photoelectric sensor dimensional drawing
Slot type photoelectric sensor wiring diagram:
Slot type photoelectric sensor 2-wire 3-wire 4-wire wiring diagram
Tips: What is a slot type photoelectric sensor?
The slot type photoelectric sensor is actually a kind of through beam photoelectric sensor, also called U-type photoelectric sensor. It is an infrared photoelectric sensor, which is composed of a light projector and light receiver. The slot width determines the strength of the inductive received signal and the distance of the received signal. The slot type photoelectric sensor and the proximity sensor are also non-contact sensor, which is less restricted by the detecting object. Slot type photoelectric sensor has a long detecting distance about tens of meters, and has high accuracy for small objects detecting. Slot type photoelectric sensor is mainly used for pass detection, entry detection, position detection, time detection, direction identification and safety confirmation.

In this video, ATO will show you how to use a slot type photoelectric sensor and a digital counter for number counting.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Questions about slot type photoelectric sensor
5
Mary
Avatar
5/13/2021 8:58 PM
For your slot type photoelectric sensor, how large the obaqe should be, so can be detected?
Was this review helpful? Yes No (0/0)
ATO Responded
The photoelectric switch can detect objects larger than 5mm.
Can the slot type photoelectric sensor detect glass fragments?
5
Kevin
Avatar
5/18/2021 12:54 AM
Can your slot type photoelectric sensors count pieces of glass going through them?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, but the glass should be not transparent, so it can be detected, if the glass is transparent the sensor will not be able to detect.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Slot type photoelectric sensor with reverse power protection can be directly connected with PLC.

Applications: Photoelectric sensors have been used as position detection, liquid level control, product counting, width discrimination, speed detection, fixed length cutting, holes recognition, signal delay, automatic door sensing, color scale detection, punching and cutting Machine and security and many other areas. In addition, using the stealthiness of infrared, photoelectric sensors also can be used as a burglar alarm in banks, warehouses, shops, and offices.

Specification:

ModelATO-PSST-AE3S-GS7ATO-PSST-AE3S-GS15ATO-PSST-AE3S-GS30
Dimension16*25*55mm15*35.5*40.5mm20*55*72mm
DC typeNPNNONONO
NCNCNC
--NO+NC
PNPNONONO
NCNCNC
--NO+NC
Detection range7mm15mm30mm
Detection targetOpaque objectOpaque objectOpaque object
Detection range regulationSensitivity controllerSensitivity controllerSensitivity controller
Response time1ms1ms1ms
Connection delay1.5ms
Light sourceInfrared light 660nm
Power supplyDC type: DC 12-24V (6-36V), impulse (p-p) 10% below
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤20mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, A type: ≤400mA, J type: ≤2A (contact service life: 0.1 million times)
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~+65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~+65℃, at +23℃, ±15% detection distance; Temperature range -25~+60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Aluminum die casting (ABS), Detection surface (lens): PMMA
Protection classIP65
Cable length2m

Slot type photoelectric sensor dimensional drawing:
Slot type photoelectric sensor dimensional drawing
Slot type photoelectric sensor wiring diagram:
Slot type photoelectric sensor 2-wire 3-wire 4-wire wiring diagram
Tips: What is a slot type photoelectric sensor?
The slot type photoelectric sensor is actually a kind of through beam photoelectric sensor, also called U-type photoelectric sensor. It is an infrared photoelectric sensor, which is composed of a light projector and light receiver. The slot width determines the strength of the inductive received signal and the distance of the received signal. The slot type photoelectric sensor and the proximity sensor are also non-contact sensor, which is less restricted by the detecting object. Slot type photoelectric sensor has a long detecting distance about tens of meters, and has high accuracy for small objects detecting. Slot type photoelectric sensor is mainly used for pass detection, entry detection, position detection, time detection, direction identification and safety confirmation.

Product reviews
Questions about slot type photoelectric sensor
5
Mary
Avatar
5/13/2021 8:58 PM
For your slot type photoelectric sensor, how large the obaqe should be, so can be detected?
Was this review helpful? Yes No (0/0)
ATO Responded
The photoelectric switch can detect objects larger than 5mm.
Can the slot type photoelectric sensor detect glass fragments?
5
Kevin
Avatar
5/18/2021 12:54 AM
Can your slot type photoelectric sensors count pieces of glass going through them?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, but the glass should be not transparent, so it can be detected, if the glass is transparent the sensor will not be able to detect.
Only registered users can write reviews
Customers who bought this item also bought

Digital Counter, 6 Digit, Up/Down, Number/Length/Batch

ATO-DIGC-FH6D
$89.14
6 digit counter can be used for counting number/length/batch, position control of balers controlled by variable frequency motor, and measuring height, position and angle. Digital counter with up/down input modes can preset count value or length, and simultaneously display the total count, counting length and batch value in real time.

Digital Counter, 8 Digit, Up/Down, Number/Length/Batch

ATO-DIGC-FH8D
$124.98
8 digit counter can be used for counting number/length/batch, position control of balers controlled by variable frequency motor, and measuring height, position and angle. Digital counter with up/down input modes can preset count value or length, and simultaneously display the total count, counting length and batch value in real time.

5 Digit Display Controller for Load Cells

ATO-DPM-LC5D
$210.80
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

Diffuse Reflective Photoelectric Sensor

ATO-PHOS-DR
$59.27
Diffuse reflective photoelectric sensor consists of light projector and light receiver in one, can distinguish transparent or opaque reflective object. The supply voltage is DC 12V-24V (6-36V) or AC 110V-220V (90-250V). Infrared photoelectric sensor can be compensated for longer distance with sensitivity controller, less susceptible to interference, fast reaction, long life, high resolution and high reliability.

Strain Gauge Load Cell, S type, 5kg/50kg/1000kg/3 ton to 20 ton

ATO-LC-S01
$88.41
S type load cell can bear both tension and pressure, with good output symmetry, high accuracy, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, electronic-mechanical scale, crane scales and other force value measurement and control.