Diffuse Reflective Photoelectric Sensor

$59.27
Diffuse reflective photoelectric sensor consists of light projector and light receiver in one, can distinguish transparent or opaque reflective object. The supply voltage is DC 12V-24V (6-36V) or AC 110V-220V (90-250V). Infrared photoelectric sensor can be compensated for longer distance with sensitivity controller, less susceptible to interference, fast reaction, long life, high resolution and high reliability.
SKU: ATO-PHOS-DR
*
Free Shipping
Delivery date: 6-12 days

Diffuse reflective photoelectric sensor with reverse power protection, short circuit protection, current overload protection, can be directly connected with PLC.

Applications: Photoelectric sensors have been used as position detection, liquid level control, product counting, width discrimination, speed detection, fixed length cutting, holes recognition, signal delay, automatic door sensing, color scale detection, punching and cutting Machine and security and many other areas. In addition, using the stealthiness of infrared, photoelectric sensors also can be used as a burglar alarm in banks, warehouses, shops, and offices.

Specification:
1. DC/AC output:

TypeRound typeSquare amplifier built-in type
DimensionM12*1M18*1M30*1.515.5*21*41mm10.8*20*31mm
DC typeNPNNONONONONO
NCNCNCNC-
-NO+NCNO+NC--
PNPNONONONONO
NCNCNCNC-
-NO+NCNO+NC--
AC typeTwo-wire-NONO--
-NCNC--
Detection range8cm±10%10-30cm±10%50cm±10%10cm±10%5-10cm/20-50cm
Detection targetTransparent/opaque objectTransparent/opaque objectTransparent/opaque objectTransparent/opaque objectTransparent/opaque object
Detection range regulationFixedSensitivity controllerSensitivity controllerSensitivity controllerSensitivity controller
Response time1ms1ms1ms1ms1ms
Connection delay1.5ms
Light sourceInfrared light 660nm
Power supplyDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤20mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, A type: ≤400mA, J type: ≤2A (contact service life: 0.1 million times)
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass (ABS), Detection surface (lens): PMMA
Protection classIP67
Cable length1.2m

2. Relay output:

TypeSquare relay built-in type
Dimension18*50*50mm25*65*75mm
Relay outputDC illuminatedDC illuminated
AC illuminatedAC illuminated
DC non-illuminatedDC non-illuminated
AC non-illuminatedAC non-illuminated
Detection range30cm±10%70cm±10%
Detection targetTransparent/opaque objectTransparent/opaque object
Detection range regulationSensitivity controllerSensitivity controller
Response time30ms30ms
Response frequencyDC: 0.5kHz, AC: 25kHz
Delay distance≤10% detection distance
Connection delay1.5ms
Light sourceInfrared light 660nm
Supply voltageDC type: DC 12-24V (6-36V), Impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz; DC/AC type: DC 12-240V/AC 24-240V, 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Power current≤3VA
Control output≤2A (contact service life: 0.1 million times)
Allowed impulsion and vibrationB≤30g, T≤11ms, f≤55Hz, a≤1mm
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no drew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Aluminum die casting (ABS), Detection surface (lens): PMMA
Protection classIP65
Cable length1.2m

Wiring diagram:
Diffuse reflective photoelectric sensor wiring diagram
Tips: Detection distance of diffuse reflection photoelectric sensor

The effective detection distance of the diffuse reflection photoelectric sensor is determined by the reflection ability of the detection object. The specific influencing factors are the distance between the detection object and the photoelectric sensor, the color, the size, the surface structure and the surface inclination of the detected object.
Through adjusting the potentiometer or mechanical adjustment knob in the photoelectric sensor, to improve the receiving sensitivity for reflected light. In the case of a fixed detection distance at the scene, if there is a strong reflected light background. In order to avoid photoelectric switch malfunction, it's better to use a background suppression diffuse photoelectric sensor. Or directly keep away from the background, remove the background, paint the background to be matt black, make the background to be rough or gray and other methods to eliminate bad effect.

In this video, ATO will show you top ten most used sensors (sensing technologies).

How to Connect Photoelectric Sensors to PLC?

This video introduces the connection method of photoelectric sensors to PLC. Whether it is a photoelectric sensor, proximity sensor or laser switch, their wiring principles are similar. We can use its output signal to control the intermediate relay, or we can input the signal to the PLC for logic control.

How to Wire and Test Diffuse Photoelectric Sensor?

In this video, we introduce the process of how to wire and test diffuse photoelectric sensor.

How to Use Photoelectric Sensor/Infrared Sensor?

When using, the light transmitter and light receiver are installed on both sides of the path where the detection object passes. When the detection object passes, the light path is blocked and the light receiver is activated to output the switch control signal.

How to Count Using Photoelectric Sensors?

In this video, ATO will show you how to count using slot photoelectric sensors and digital counters.

Product reviews
Easy to connect and use
5
Simon
Avatar
6/14/2018 3:20 AM
It works together with the 4 digit up/down digital counter. Easy to connect and use.
Was this review helpful? Yes No (0/0)
Sensitive and Stable
5
Dylan
Avatar
11/3/2018 1:00 AM
After test, I can see the diffuse reflective photoelectric sensors are very sensitive. The transparent objects can be sensed quickly. I use the photoelectric sensors for the cloth rectifying controller. And now the control system is very stable.
Was this review helpful? Yes No (0/0)
Can the output of a digital counter be connected to another machine?
5
Joshua
Avatar
5/26/2022 11:59 PM
I watched a YouTube video from ATO using a photoelectric sensor and digital counter. I would like to purchase both the sensor and digital counter. Also, I want to connect the output of the digital counter to another machine (EFD) using a 8-pin I/O port (5-24VDC), is this possible?
Was this review helpful? Yes No (0/0)
ATO Responded
Dear Joshua,

1. What type of sensor and digital counter do you want to purchase?
2. What function do you want to achieve by connecting the output of the digital counter to another machine (EFD), and what input signals does your machine EFD support? Can you provide us a manual?
I wonder if it is possible to connect the diffuse reflective photoelectric sensor to an AB Micrologix 1400 controller?
5
DeLisle
Avatar
12/12/2022 7:49 PM
I wonder if it is possible to connect the diffuse reflective photoelectric sensor to an AB Micrologix 1400 controller. If yes, the signal cable connects to the PLC digital input?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, it can be connected to the AB Micrologix 1400 controller, just you need to select the PNP output signal type, active high.
2. Its signal cable connects to the PLC digital input. Regarding the cables of the sensor, the brown one is for 24VDC, the blue one is for common, and the black one is for signal.
I need a suitable photoelectric sensor
5
zeki
Avatar
7/20/2023 2:28 AM
Hi, I need a Diffuse Reflective Photoelectric Sensor that works until -40°C.
Which of the sensor can meet these specs?
Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-PHOS-DR
See specs and price, and you can order online by credit card at: https://www.ato.com/diffuse-reflective-photoelectric-sensor
Free shipping
The minimum operating temperature of our Diffuse Reflective Photoelectric Sensor is -25°C, and it cannot reach -40°C.
Problems may occur if it is used for a long time at -40°C.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Diffuse reflective photoelectric sensor with reverse power protection, short circuit protection, current overload protection, can be directly connected with PLC.

Applications: Photoelectric sensors have been used as position detection, liquid level control, product counting, width discrimination, speed detection, fixed length cutting, holes recognition, signal delay, automatic door sensing, color scale detection, punching and cutting Machine and security and many other areas. In addition, using the stealthiness of infrared, photoelectric sensors also can be used as a burglar alarm in banks, warehouses, shops, and offices.

Specification:
1. DC/AC output:

TypeRound typeSquare amplifier built-in type
DimensionM12*1M18*1M30*1.515.5*21*41mm10.8*20*31mm
DC typeNPNNONONONONO
NCNCNCNC-
-NO+NCNO+NC--
PNPNONONONONO
NCNCNCNC-
-NO+NCNO+NC--
AC typeTwo-wire-NONO--
-NCNC--
Detection range8cm±10%10-30cm±10%50cm±10%10cm±10%5-10cm/20-50cm
Detection targetTransparent/opaque objectTransparent/opaque objectTransparent/opaque objectTransparent/opaque objectTransparent/opaque object
Detection range regulationFixedSensitivity controllerSensitivity controllerSensitivity controllerSensitivity controller
Response time1ms1ms1ms1ms1ms
Connection delay1.5ms
Light sourceInfrared light 660nm
Power supplyDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤20mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, A type: ≤400mA, J type: ≤2A (contact service life: 0.1 million times)
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass (ABS), Detection surface (lens): PMMA
Protection classIP67
Cable length1.2m

2. Relay output:

TypeSquare relay built-in type
Dimension18*50*50mm25*65*75mm
Relay outputDC illuminatedDC illuminated
AC illuminatedAC illuminated
DC non-illuminatedDC non-illuminated
AC non-illuminatedAC non-illuminated
Detection range30cm±10%70cm±10%
Detection targetTransparent/opaque objectTransparent/opaque object
Detection range regulationSensitivity controllerSensitivity controller
Response time30ms30ms
Response frequencyDC: 0.5kHz, AC: 25kHz
Delay distance≤10% detection distance
Connection delay1.5ms
Light sourceInfrared light 660nm
Supply voltageDC type: DC 12-24V (6-36V), Impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz; DC/AC type: DC 12-240V/AC 24-240V, 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Power current≤3VA
Control output≤2A (contact service life: 0.1 million times)
Allowed impulsion and vibrationB≤30g, T≤11ms, f≤55Hz, a≤1mm
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no drew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Aluminum die casting (ABS), Detection surface (lens): PMMA
Protection classIP65
Cable length1.2m

Wiring diagram:
Diffuse reflective photoelectric sensor wiring diagram
Tips: Detection distance of diffuse reflection photoelectric sensor

The effective detection distance of the diffuse reflection photoelectric sensor is determined by the reflection ability of the detection object. The specific influencing factors are the distance between the detection object and the photoelectric sensor, the color, the size, the surface structure and the surface inclination of the detected object.
Through adjusting the potentiometer or mechanical adjustment knob in the photoelectric sensor, to improve the receiving sensitivity for reflected light. In the case of a fixed detection distance at the scene, if there is a strong reflected light background. In order to avoid photoelectric switch malfunction, it's better to use a background suppression diffuse photoelectric sensor. Or directly keep away from the background, remove the background, paint the background to be matt black, make the background to be rough or gray and other methods to eliminate bad effect.

Product reviews
Easy to connect and use
5
Simon
Avatar
6/14/2018 3:20 AM
It works together with the 4 digit up/down digital counter. Easy to connect and use.
Was this review helpful? Yes No (0/0)
Sensitive and Stable
5
Dylan
Avatar
11/3/2018 1:00 AM
After test, I can see the diffuse reflective photoelectric sensors are very sensitive. The transparent objects can be sensed quickly. I use the photoelectric sensors for the cloth rectifying controller. And now the control system is very stable.
Was this review helpful? Yes No (0/0)
Can the output of a digital counter be connected to another machine?
5
Joshua
Avatar
5/26/2022 11:59 PM
I watched a YouTube video from ATO using a photoelectric sensor and digital counter. I would like to purchase both the sensor and digital counter. Also, I want to connect the output of the digital counter to another machine (EFD) using a 8-pin I/O port (5-24VDC), is this possible?
Was this review helpful? Yes No (0/0)
ATO Responded
Dear Joshua,

1. What type of sensor and digital counter do you want to purchase?
2. What function do you want to achieve by connecting the output of the digital counter to another machine (EFD), and what input signals does your machine EFD support? Can you provide us a manual?
I wonder if it is possible to connect the diffuse reflective photoelectric sensor to an AB Micrologix 1400 controller?
5
DeLisle
Avatar
12/12/2022 7:49 PM
I wonder if it is possible to connect the diffuse reflective photoelectric sensor to an AB Micrologix 1400 controller. If yes, the signal cable connects to the PLC digital input?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, it can be connected to the AB Micrologix 1400 controller, just you need to select the PNP output signal type, active high.
2. Its signal cable connects to the PLC digital input. Regarding the cables of the sensor, the brown one is for 24VDC, the blue one is for common, and the black one is for signal.
I need a suitable photoelectric sensor
5
zeki
Avatar
7/20/2023 2:28 AM
Hi, I need a Diffuse Reflective Photoelectric Sensor that works until -40°C.
Which of the sensor can meet these specs?
Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-PHOS-DR
See specs and price, and you can order online by credit card at: https://www.ato.com/diffuse-reflective-photoelectric-sensor
Free shipping
The minimum operating temperature of our Diffuse Reflective Photoelectric Sensor is -25°C, and it cannot reach -40°C.
Problems may occur if it is used for a long time at -40°C.
Only registered users can write reviews
Customers who bought this item also bought

Isolated DC Voltage Sensor 10mV to 1000V, Power Supply DC 12V/24V

ATO-VOS-DC1000
$141.96
DC voltage sensor uses modulation and demodulation technology to achieve input/output/power supply isolation. Isolated voltage transducer has measuring range from DC 10mV/50mV/75mV/5V/150V/300V/500V to 1000V, supply voltage DC 12V/24V, accuracy 0.2%FS, output signal 0-5V/0-10V/0-20mA/4-20mA and strong anti-interference capability. DC voltage sensor is widely used for voltage isolated measuring and control, such as electric power, remote monitoring, medical equipment, etc.

Laser Sensor, Displacement/RPM Measurement, M12, 200mm/100m

ATO-LASES-M12
$134.92
M12 laser sensor for displacement/rpm measurement adopts diffuse reflection or through beam detection mode. The through beam laser sensor has the detection range of 100m, and the diffuse reflection laser sensor has 200mm detection range. High accuracy laser sensor has power supply 10-30VDC, protection class IP67, laser spot size 4mm and stainless steel detection head with thread size M12*1mm.

1200W Industrial Air Blower, Variable Speed, 110V/220V

ATO-ABL-1200
$868.23
Small industrial air blower for sale, 1200 Watt, 110V/220V AC, designed for air vacuum and air blower with stable air volume, air flow available with 253m3/h (148 CFM), 240m3/h (140 CFM) and 228m3/h (134 CFM). The blower has 44.5 mm inlet & outlet diameter, and max. speed 20000 RPM, allowing variable speed to realize the air volume adjustable. High pressure, steady airflow and favorable price.

Inclinometer Sensor, Output Modbus, ±10°~±90°

ATO-IMS-116126MB
$192.31
Single axis or dual axis inclinometer sensor for sale. High precision tilt switch comes with output signal Modbus, optional measuring range ±10°/±30°/±60°/±90°, output interface RS232, RS485, RS232, UART TTL, absolute accuracy 0.05°, power supply input 9-36V.

Digital Counter, 6 Digit, Up/Down, Number/Length/Batch

ATO-DIGC-FH6D
$89.14
6 digit counter can be used for counting number/length/batch, position control of balers controlled by variable frequency motor, and measuring height, position and angle. Digital counter with up/down input modes can preset count value or length, and simultaneously display the total count, counting length and batch value in real time.