RTD Sensor Probe, Pt100, 3 Wire

$108.38
RTD sensor probe adopts high-quality temperature chip to ensure long-term stability and high accuracy. High-quality PTFE shielded wires can effectively shield interference. The 3 wire Pt100 temperature sensor probe measurement range is -50~+200℃ (-58~+392℉). It can be used for pipeline, container, solid surface and end face temperature measurement.
SKU: ATO-RTD-PB3W
*
*
Free Shipping
Delivery date: 6-12 days

Pt100 RTD sensor probes with 4 kinds of dimension can be used in different temperature measurement applications. 3 wire Pt100 probes are usually used with temperature controller, signal isolator and paperless recorder to form a temperature monitoring system.

Specification

Model *ATO-RTD-WZP-PT100-1ATO-RTD-WZP-PT100-2ATO-RTD-WZP-PT100-3ATO-RTD-WZP-PT100-4
Shipping weight0.5kg
Probe materialStainless steelBrassStainless steelStainless steel
Probe dimensionLength: 30mm
Diameter: 4mm
Length: 25mm
Diameter: 8mm
Length: 10mm
Maximum width: 8mm
Hole diameter: 4mm
Length: 50mm
Diameter: 6mm
Thread: M20*1.5mm
Cable materialPTFE corrosion-resistant and silver-plated wire
Cable length *1m, 2m, 3m, 4m, 5m, customizable
Type of probePt100
Measuring range-50~+200℃ (-58~+392℉)
Temperature coefficientTCR=3850ppm/k
AccuracyClass A: ±(0.15+0.002|T|), T is the actual measurement temperature.
StabilityR0 drift≤0.04% (500℃/932℉, after 1000 hours)
Anti-vibration≥40g acceleration (10~2000Hz)
Insulation resistance>100MΩ (20℃/68℉), >2MΩ (500℃/932℉)
Natural coefficient0.4K/mW (0℃/32℉)
ApplicationOven, water tank, laboratory, various equipment needing temperature measurementTemperature measurement on the solid surface and end face of motor or boilerMotor or bearing surface temperature measurementPipelines, containers, various equipment needing temperature measurement

Note: * denotes optional parameters, you can select parameters in drop-down lists to finish your order. Some customizable parameters can't be selected from the lists directly, please contact customer service staff for further communication.

Feature

RTD sensor probe pt100 3 wire feature

  • Enhanced Signal Stability: Silver-plated shielding cable provides better signal clarity and stronger anti-interference performance than standard shielded wires.
  • Low-Resistance U-Type Terminals: U-type connectors reduce terminal resistance, helping improve temperature measurement accuracy.
  • Thicker Conductors for Accuracy: 2mm diameter wires offer lower resistance compared to 1mm wires, effectively minimizing measurement error.
  • Durable Stainless Steel Construction: RTD sensor probe made from 304 stainless steel for excellent high-temperature resistance and corrosion protection, ensuring long service life.

Detail

RTD sensor probe pt100 3 wire detail

Application

RTD sensor probe pt100 3 wire application

Tips: RTD sensor probe for air or object surface temperature measurement

Compared to the RTD sensor, thermocouples can operate at much higher temperatures and respond faster. However, the voltage signal generated by a thermocouple is low and may require additional amplification, which is a disadvantage in environments with high electrical noise. Unlike thermocouples, RTD sensors do not require reference points, ice baths, or temperature compensation circuits. RTD sensor has a very low thermal mass, so it provides true surface temperature measurement value and response times as fast as 50ms.
When using an RTD sensor probe to measure the air temperature of a pipeline, the front end of the air temperature probe must be perpendicular to the measured pipeline and fully contact the measured air. The contact surface between the surface RTD probe and the measured object must be flat, otherwise, the measurement result will be affected during the measurement.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Questions about RTD sensor
5
Pauijs
Avatar
12/28/2021 12:49 AM
Can you send me some photos of this item before shipping?
This is a big customer and they have many projects and we would like to win the next orders.
Was this review helpful? Yes No (0/0)
ATO Responded
Ok, we shall fully support you and will send you photos before shipping out.
Wire Specifications
5
Heller
Avatar
11/4/2025 7:17 PM
Hello, do you know the wire gauge of ATO-RTD-WZP-PT100-1? Thank you!
Was this review helpful? Yes No (0/0)
ATO Responded
Do you want to know the wire diameter? The wire diameter is approximately 2-3 mm.
User Manual
5
Molden
Avatar
2/25/2026 11:25 PM
Hello. Do you have the user manual for the ATO-RTD-WZP-PT100 RTD sensor probe?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, there is no separate manual for it. Specifications can be found on our website: https://www.ato.com/rtd-sensor-probe-pt100-3-wire
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Pt100 RTD sensor probes with 4 kinds of dimension can be used in different temperature measurement applications. 3 wire Pt100 probes are usually used with temperature controller, signal isolator and paperless recorder to form a temperature monitoring system.

Specification

Model *ATO-RTD-WZP-PT100-1ATO-RTD-WZP-PT100-2ATO-RTD-WZP-PT100-3ATO-RTD-WZP-PT100-4
Shipping weight0.5kg
Probe materialStainless steelBrassStainless steelStainless steel
Probe dimensionLength: 30mm
Diameter: 4mm
Length: 25mm
Diameter: 8mm
Length: 10mm
Maximum width: 8mm
Hole diameter: 4mm
Length: 50mm
Diameter: 6mm
Thread: M20*1.5mm
Cable materialPTFE corrosion-resistant and silver-plated wire
Cable length *1m, 2m, 3m, 4m, 5m, customizable
Type of probePt100
Measuring range-50~+200℃ (-58~+392℉)
Temperature coefficientTCR=3850ppm/k
AccuracyClass A: ±(0.15+0.002|T|), T is the actual measurement temperature.
StabilityR0 drift≤0.04% (500℃/932℉, after 1000 hours)
Anti-vibration≥40g acceleration (10~2000Hz)
Insulation resistance>100MΩ (20℃/68℉), >2MΩ (500℃/932℉)
Natural coefficient0.4K/mW (0℃/32℉)
ApplicationOven, water tank, laboratory, various equipment needing temperature measurementTemperature measurement on the solid surface and end face of motor or boilerMotor or bearing surface temperature measurementPipelines, containers, various equipment needing temperature measurement

Note: * denotes optional parameters, you can select parameters in drop-down lists to finish your order. Some customizable parameters can't be selected from the lists directly, please contact customer service staff for further communication.

Feature

RTD sensor probe pt100 3 wire feature

  • Enhanced Signal Stability: Silver-plated shielding cable provides better signal clarity and stronger anti-interference performance than standard shielded wires.
  • Low-Resistance U-Type Terminals: U-type connectors reduce terminal resistance, helping improve temperature measurement accuracy.
  • Thicker Conductors for Accuracy: 2mm diameter wires offer lower resistance compared to 1mm wires, effectively minimizing measurement error.
  • Durable Stainless Steel Construction: RTD sensor probe made from 304 stainless steel for excellent high-temperature resistance and corrosion protection, ensuring long service life.

Detail

RTD sensor probe pt100 3 wire detail

Application

RTD sensor probe pt100 3 wire application

Tips: RTD sensor probe for air or object surface temperature measurement

Compared to the RTD sensor, thermocouples can operate at much higher temperatures and respond faster. However, the voltage signal generated by a thermocouple is low and may require additional amplification, which is a disadvantage in environments with high electrical noise. Unlike thermocouples, RTD sensors do not require reference points, ice baths, or temperature compensation circuits. RTD sensor has a very low thermal mass, so it provides true surface temperature measurement value and response times as fast as 50ms.
When using an RTD sensor probe to measure the air temperature of a pipeline, the front end of the air temperature probe must be perpendicular to the measured pipeline and fully contact the measured air. The contact surface between the surface RTD probe and the measured object must be flat, otherwise, the measurement result will be affected during the measurement.

Product reviews
Questions about RTD sensor
5
Pauijs
Avatar
12/28/2021 12:49 AM
Can you send me some photos of this item before shipping?
This is a big customer and they have many projects and we would like to win the next orders.
Was this review helpful? Yes No (0/0)
ATO Responded
Ok, we shall fully support you and will send you photos before shipping out.
Wire Specifications
5
Heller
Avatar
11/4/2025 7:17 PM
Hello, do you know the wire gauge of ATO-RTD-WZP-PT100-1? Thank you!
Was this review helpful? Yes No (0/0)
ATO Responded
Do you want to know the wire diameter? The wire diameter is approximately 2-3 mm.
User Manual
5
Molden
Avatar
2/25/2026 11:25 PM
Hello. Do you have the user manual for the ATO-RTD-WZP-PT100 RTD sensor probe?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, there is no separate manual for it. Specifications can be found on our website: https://www.ato.com/rtd-sensor-probe-pt100-3-wire
Only registered users can write reviews
Customers who bought this item also bought

Pressure Sensor for Air/Water/Oil, 4-20mA/0-5V/RS485 Output

ATO-PRES-P300
$119.68
Silicon piezoresistive pressure sensor covers -0.1 to 100 MPa with 4–20mA, 0–20mA, multiple voltage or RS485 output options. Stainless steel construction supports air, water and oil pressure measurement at medium temperatures from -40°C to 60°C.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Digital Panel Meter for RTD/Pressure/Level Sensor, Double 4 Digit

ATO-DPM-USD4D
$97.88
Intelligent digital panel meter has double 4 digit LED for PV and SV display. Digital display controller also has optional fuctions of 2 alarms, 1 transmit analog signal or RS485/232 output, additional power supply (DC 24V) for sensors. Digital panel meter can be used for various sensors and transmitters, such as temperature sensor (themocouple B/S/K/E/T/J/R/N type and RTD Cu50/Cu100/Pt100), pressure sensor, flow sensor, level sensor, displacement sensor (0-500Ω/0-350Ω output), transmitter (0-20mA/4-20mA/0-5V/0-10V output), etc.

Strain Gauge Load Cell, S type, 5kg/50kg/1000kg/3 ton to 20 ton

ATO-LC-S01
$88.41
S type load cell can bear both tension and pressure, with good output symmetry, high accuracy, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, electronic-mechanical scale, crane scales and other force value measurement and control.

High Temperature Pressure Sensor for Steam/Fuel Oil

ATO-PRES-P300G
$153.97
High-temperature pressure sensor covers -0.1 to 100 MPa and supports 4–20mA, 0–20mA, voltage and RS485 outputs. Designed for steam, fuel oil and other high-temperature liquids, it supports medium temperatures up to 300°C and uses cooling fins for thermal isolation.