RTD Sensor, Pt100, Thermowell

$91.54
Pt100 RTD sensor is a platinum resistor temperature sensor with protection head and stainless steel thermowell, high pressure resistant, fast thermal response time and long operating life. RTD sensor can directly measure the temperature in the range of -200~+420 ℃ in various production processes.
SKU: ATO-RTD-TW
*
This product has a minimum quantity of 2
Free Shipping
Delivery date: 6-12 days

RTD (resistance temperature detector) sensor can directly connect to secondary instrument by copper conductor, and provide accurate input signal of temperature changes for display instruments, recording instruments, signal conditioners, scanister and computer.

Specification

1. RTD temperature range and accuracy chart

Type of sensing elementMeasuring rangeAllowable deviation Δt
Pt100-200~420℃Class B (-200~800℃) Permissible deviation ±(0.30+0.005|t|)
Class A (-200~650℃) Permissible deviation ±(0.15+0.002|t|)
Cu50-100~150℃-50~100℃ Permissible deviation ±(0.30+6.0*10-3t)

Note: t is the actual measuring temperature absolute value of the temperature sensing element.
2. Thermal response time of RTD sensor

Type of sheathed sensing elementThermowell materialThermowell diameter (mm)Thermal response time (s)
Pt100, Pt10001Cr18Ni9Ti, 2Cr25Ni20Ф16≤90
Ф12≤30
Cu50, Cu100H62, 1Cr18Ni9TiФ16≤120
Ф12≤120


Feature

  • Strong Applicability: RTD sensor can be used with display instruments, recording instruments, and electronic regulators. It can directly measure the temperature of liquid, steam, gas medium and solid surface in the range of -200℃~+420℃ in various production processes.
  • Anti-interference: The heated part (temperature sensing element) of the Pt100 RTD sensor is a double-wound metal wire evenly wrapped around a skeleton made of insulating material. When there is a temperature gradient in the measured medium, the measured temperature is the average temperature of the medium layer within the range of the temperature sensing element.
  • Corrosion Resistance: The protective tube is made of 304 stainless steel, so it has strong anti-pollution performance and excellent mechanical strength, and is suitable for installation in harsh environments.

Installation

RTD sensor installing form

Selection

Total length of thermowell (L)Branch numberThermowell installing formProtection head formDiameter of thermowell
300~2150mm (Φ16 for I1, I2, I3, I4);
225~1150mm (Φ12 for I1, I2, I3, I4);
225~550mm (for I6)
B1: Single branch;
B2: Double branch
I0: No thermowell;
I1: No fixed device;
I2: Fixing thread;
I3: Movable flange;
I4: Fixed flange;
I5: Rectangular movable flange;
I6: Taper thermowell and fixing thread
C3: Waterproof protection head;
C4: Explosion-proof protection head
D0: Φ16mm;
D1: Φ12mm


Application

Application of RTD sensor pt100 thermowell

Tips: Pt100 RTD sensor working principle
Pt100 is a kind of platinum resistance, and also a thermistor of positive temperature coefficient, that is, the resistance value rises with the increase of the temperature. Platinum resistance has high accuracy, suitable for neutral and oxidizing medium. It has good stability and can test a wide temperature range (-200~420℃). The most important thing is that platinum resistance has good linearity, that is, when the temperature changes one degree, the increase of resistance value is basically the same. Pt100 resistance value is 100 ohm at 0℃, 18.52 ohm at -200℃ and 175.86 ohm at 200℃. In addition to Pt100, the most commonly thermistor are Pt1000 (platinum resistance of 1000 ohm at 0℃) and Cu50 (copper resistance of 50 ohm at 0℃).

In this video, ATO will show you how to connect RTD sensor to temperature controller and how to use RTD sensor to measure water temperature.

Fixed Installation Dimension Drawing

Design serial number1
Structure diagramThermocouple RDT sensor dimension
NameFixed thread
SizeM27*2 (default), G3/4", M33*2, G1", other
Protection tubeDiameterφ12mm, φ16mm, other
Texture of material1Cr18Ni9Ti, 2Cr25Ni20, other
Withstand voltage≤10MPa
Design serial number2
Structure diagramThermocouple RDT sensor dimension
NameMovable flange
Protection tubeDiameterφ12mm, φ16mm, other
Texture of material1Cr18Ni9Ti, 2Cr25Ni20, other
Withstand voltageAtmospheric pressure
Design serial number3
Structure diagramThermocouple RDT sensor dimension
NameFixed flange
SizeDN15mm (default)D095mmDN20mm105mm
D165mm75mm
D245mm55mm
φn4-φ14mm4-φ14mm
DN25mmD0115mmDN32mm140mm
D185mm100mm
D265mm78mm
φn4-φ14mm4-φ18mm
DN40mmD0150mmDN50mm165mm
D1110mm125mm
D285mm100mm
φn4-φ18mm4-φ18mm
H12mm
Protection tubeDiameterφ12mm, φ16mm, other
Texture of material1Cr18Ni9Ti, 2Cr25Ni20, other
Withstand voltage≤6.4MPa
Design serial number4
Structure diagramThermocouple RDT sensor dimension
NameConical fixed thread
SizeM27*2 (default), M33*2, G1", other
Protection tubeDiameterφ12mm, φ16mm, other
Texture of material1Cr18Ni9Ti, 2Cr25Ni20, other
Withstand voltage≥30MPa
Product reviews
Can your provide customized RTD sensor, based on our specs/dims?
5
Lily
Avatar
12/28/2021 10:50 PM
Can your provide customized RTD sensor, based on our specs/dims?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, just specify required specs/dims.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

RTD (resistance temperature detector) sensor can directly connect to secondary instrument by copper conductor, and provide accurate input signal of temperature changes for display instruments, recording instruments, signal conditioners, scanister and computer.

Specification

1. RTD temperature range and accuracy chart

Type of sensing elementMeasuring rangeAllowable deviation Δt
Pt100-200~420℃Class B (-200~800℃) Permissible deviation ±(0.30+0.005|t|)
Class A (-200~650℃) Permissible deviation ±(0.15+0.002|t|)
Cu50-100~150℃-50~100℃ Permissible deviation ±(0.30+6.0*10-3t)

Note: t is the actual measuring temperature absolute value of the temperature sensing element.
2. Thermal response time of RTD sensor

Type of sheathed sensing elementThermowell materialThermowell diameter (mm)Thermal response time (s)
Pt100, Pt10001Cr18Ni9Ti, 2Cr25Ni20Ф16≤90
Ф12≤30
Cu50, Cu100H62, 1Cr18Ni9TiФ16≤120
Ф12≤120


Feature

  • Strong Applicability: RTD sensor can be used with display instruments, recording instruments, and electronic regulators. It can directly measure the temperature of liquid, steam, gas medium and solid surface in the range of -200℃~+420℃ in various production processes.
  • Anti-interference: The heated part (temperature sensing element) of the Pt100 RTD sensor is a double-wound metal wire evenly wrapped around a skeleton made of insulating material. When there is a temperature gradient in the measured medium, the measured temperature is the average temperature of the medium layer within the range of the temperature sensing element.
  • Corrosion Resistance: The protective tube is made of 304 stainless steel, so it has strong anti-pollution performance and excellent mechanical strength, and is suitable for installation in harsh environments.

Installation

RTD sensor installing form

Selection

Total length of thermowell (L)Branch numberThermowell installing formProtection head formDiameter of thermowell
300~2150mm (Φ16 for I1, I2, I3, I4);
225~1150mm (Φ12 for I1, I2, I3, I4);
225~550mm (for I6)
B1: Single branch;
B2: Double branch
I0: No thermowell;
I1: No fixed device;
I2: Fixing thread;
I3: Movable flange;
I4: Fixed flange;
I5: Rectangular movable flange;
I6: Taper thermowell and fixing thread
C3: Waterproof protection head;
C4: Explosion-proof protection head
D0: Φ16mm;
D1: Φ12mm


Application

Application of RTD sensor pt100 thermowell

Tips: Pt100 RTD sensor working principle
Pt100 is a kind of platinum resistance, and also a thermistor of positive temperature coefficient, that is, the resistance value rises with the increase of the temperature. Platinum resistance has high accuracy, suitable for neutral and oxidizing medium. It has good stability and can test a wide temperature range (-200~420℃). The most important thing is that platinum resistance has good linearity, that is, when the temperature changes one degree, the increase of resistance value is basically the same. Pt100 resistance value is 100 ohm at 0℃, 18.52 ohm at -200℃ and 175.86 ohm at 200℃. In addition to Pt100, the most commonly thermistor are Pt1000 (platinum resistance of 1000 ohm at 0℃) and Cu50 (copper resistance of 50 ohm at 0℃).

Product reviews
Can your provide customized RTD sensor, based on our specs/dims?
5
Lily
Avatar
12/28/2021 10:50 PM
Can your provide customized RTD sensor, based on our specs/dims?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, just specify required specs/dims.
Only registered users can write reviews